mathematics.abaqus.user (thread)

question about 'restart', Li Chen
Hiperelasticity, Geralf Pineda Hernández
- Re: Hiperelasticity, Dave Lindeman
Python scripting: FieldOutputs in Odbs, (fabri) done ugarte
Catia2abaqus, marchello_si
- Re: Catia2abaqus, vaibhav ekbote
Remeshing on ABAQUS/standard, zaghbani_imed
- Re: Remeshing on ABAQUS/standard, Doru Cantemir
- Re: Remeshing on ABAQUS/standard, Mike hechter
Modelling of turf/grass, bobfkirk
Hyperelastic material modelling using Ogden equation, Chul-Jin Byun
- RE: Hyperelastic material modelling using Ogden equation, Sridharan
  - RE: Hyperelastic material modelling using Ogden equation, JYK
- Re: Hyperelastic material modelling using Ogden equation, Dave Lindeman
Orthopaedic Biomechanics Job Opportunity, Petrella, Tony [DPYUS]
Impact Analysis, ravindran_manoharan
How to terminate Current Step move on to Next Step in USDFLD subroutine, huckbengchew
- Re: How to terminate Current Step move on to Next Step in USDFLD subroutine, Dave Lindeman
Bonding/debonding, Liang, Shaomin
what is the different bewean Abaqus Standard and Abaqus Explict., Balendra Surendran
- Re: what is the different bewean Abaqus Standard and Abaqus Explict., BenZ
Abaqus on a centrino laptop, Mohamed el tobgy
- Re: Abaqus on a centrino laptop, BenZ
Modelling of tank insert, Grzegorz Brozek
Crack growth problem, huckbengchew
- Re: Crack growth problem, Zaghbani Imed
Running out of disk space when running model, gt0398b
- Re: Running out of disk space when running model, Shiladitya Basu
  - How to check the Licencses in use, vaibhav ekbote
simulating wind load, idle
- Re: simulating wind load, Dave Lindeman
- Re: simulating wind load, michael dowhopoluk
- re:simulating wind load, Mary Baker
- Re: simulating wind load, Gareth Jones
Pls Help--Nonlinear dynamic analysis, ravindran_manoharan
question on a covered plate with flexible foam, Narcis
weird results, meyh2002
- Re: weird results, BenZ
  - Re: weird results, meyh2002
    - Re: weird results, BenZ
Explicit temp/disp, juntiq
- help on Abaqus, Hongyu Sun
  - Re: help on Abaqus, BenZ
    - Re: Re: help on Abaqus, Hongyu Sun
    - Re: help on Abaqus, BenZ
- Re: Explicit temp/disp, zaghbani_imed
Importing sketches, Jason Parham
- RE: Importing sketches, Robert Henderson
Infinite element error, Albert Medina
- Re: Infinite element error, Dave Lindeman
Help on UEL, reddypsreedhar
Help on Nonlinear acouctics modelling - (Long post), ravindran_manoharan
Material Damping, J.L. Tan
AW: Coupled mechanical and elecrostatic analysis, Brenner, Achim
AW: shell and solid dofs?, Brenner, Achim
Coupled mechanical and elecrostatic analysis, hariton
shell and solid dofs?, Tiger
- Re: shell and solid dofs?, BenZ
- RE: shell and solid dofs?, P, Murali \(Research, consultant\)
  - RE: shell and solid dofs?, Alejandro Anibal Dominguez
- Re: RE: shell and solid dofs?, Tiger
Help, Sandeep S. Pendhari
- Re: Help, BenZ
  - Re: Re: Help, gatogris
Advice on Dynamic analysis, ravindran_manoharan
Re: Nominal stress and strains, SONJOY DAS
- Re: Nominal stress and strains, Ravindran Manoharan
- Nominal stress and strains, ravindran_manoharan
Pore pressure elements, Francisco Javier Garcia Gonzalez
- Re: Pore pressure elements, Darwid Halim
Specific Strain Energy Computation in UMAT, Amir Siddiq
install error,help me, junxxu
Visualizing with UEL, Ilia Hariton
Please give me a advise, k z
- Re: Please give me a advise, Ana Vila Verde
displacement BC, P, Murali \(Research, consultant\)
fracture mechanics and j-integral calculations, koh sau wee
- fracture mechanics and j-integral calculations, koh sau wee
  - Re: fracture mechanics and j-integral calculations, Amir Siddiq
- RE: fracture mechanics and j-integral calculations, Liang, Shaomin
what is the reason my ABAQUS isnot passed use'subrountine, junxxu
how to have a joint between two beams, junxxu
How to run to two input file,, tenwon10
Subject: Re: Re: ABout *mpc,tie and *tie?, Undersea Peter
Material properties of electronic devices, Ajith Ramesh
Help Please in Contact problems, munir nazzal
- Re: Help Please in Contact problems, BenZ
  - Re: Re: Help Please in Contact problems, munir nazzal
    - Re: Re: Help Please in Contact problems, Dave Lindeman
    - Re: Help Please in Contact problems, BenZ
Post processing query., ekbote_va
- Re: Post processing query., BenZ
  - Re: Re: Post processing query., vaibhav ekbote
    - Re: Post processing query., BenZ
- Re: Re: Post processing query., SONJOY DAS
trouble of cyclic loading, dragonfdl
- Re: trouble of cyclic loading, BenZ
  - Re: trouble of cyclic loading: to BenZ, dragonfdl
AW: Tank simulation help, Brenner, Achim
- Re: Tank simulation help, Jason Parham
ABout *mpc,tie and *tie?, chenhu
- Re: ABout *mpc,tie and *tie?, george jefferson
- Re: Re: ABout *mpc,tie and *tie?, chenhu
- Re: Re: ABout *mpc,tie and *tie?, george jefferson
Error message (disk space), tenwon10
- Re: Error message (disk space), Shiladitya Basu
  - Re: Error message (disk space), tenwon10
    - Re: Re: Error message (disk space), basus
    - Re: Re: Error message (disk space), Srikanth Borra
    - Re: Re: Error message (disk space), Shiladitya Basu
- Re: Error message (disk space), fuzzyRebuaz
Cohesive Zone Models as User elements, Amir Siddiq
Tank simulation help, Jason Parham
Elastomer with Suspended Particles, Nigel Butler
can two nodes merge into one node in inp?, myabaqus2004
Help: "Degree of freedom not active" error, Saurabh Nanda
- RE: Help: "Degree of freedom not active" error, fuzzyRebuaz
Simple and confused question, meyh2002
- Re: Simple and confused question, Dale Li
  - Re: Simple and confused question, meyh2002
Error code 11, Francisco Javier Garcia Gonzalez
- Error code 11, Francisco Javier Garcia Gonzalez
Crack-Propagation-J Integral, Ovunc Mutlu
- Brittle Cracking/Brittle Shear, Ovunc Mutlu
  - How to construct a 3D geometry from 2D images, Hongyu Sun
    - Re: How to construct a 3D geometry from 2D images, Dave Lindeman
Defining "exact consistent Jacobian matrix C", ezamir
- Re: Defining "exact consistent Jacobian matrix C", BenZ
  - Re: Defining "exact consistent Jacobian matrix C", ezamir
    - Re: Defining "exact consistent Jacobian matrix C", BenZ
    - Re: Re: Defining "exact consistent Jacobian matrix C", Jin Young Kim
    - Re: Defining "exact consistent Jacobian matrix C", ezamir
Failure criterion- Yield, ravindran_manoharan
Parallel Processing for Sun sytems, Sachin Patil
Linearized Slosh Modes, Paul Blelloch
- Re: Linearized Slosh Modes, Timmy Horgan
  - Re: Linearized Slosh Modes, Paul Blelloch
beam's neutral axis extension, Narcis
material damping in UMAT, kang fei
- Re: material damping in UMAT, TysonG
  - Re: Re: material damping in UMAT, kang fei
c++, Christos I. Papadopoulos
Abaqus subrutine error help!, wukuanyang
- Re: Abaqus subrutine error help!, BenZ
  - Re: Abaqus subrutine error help!, wukuanyang
    - RE: Re: Abaqus subrutine error help!, Ian
    - Re: Abaqus subrutine error help!, BenZ
    - RE: Re: Abaqus subrutine error help!, Ian
Re: thermal-mechanical dynamic response analysis, likebeijing2000
soil plasticity model, qingwei_f
- Re: soil plasticity model, Darwid Halim
- Re: soil plasticity model, david Liu
nonlinear spring or connector, Narcis
trap type invalid, c81343
Help for CAE input!!!, wukuanyang
- Re: Help for CAE input!!!, Wen-Chao Huang
  - Re: Help for CAE input!!!, wukuanyang
- Re: Help for CAE input!!!, BenZ
AW: How to tie the nodes in a plane, Brenner, Achim
Output for only final INCREMENT in a STEP, James Belshan
- Re: Output for only final INCREMENT in a STEP, george jefferson
- Re: Output for only final INCREMENT in a STEP, Doru Cantemir
  - Re: Output for only final INCREMENT in a STEP, James Belshan
Re: Export a mesh part, łÂ»˘
- Re: Export a mesh part, atmphillips
How to tie the nodes in a plane, Balendra Surendran
Patch center, csantiust1
Export a mesh part, atmphillips
Overconstraint problem and geostatic step, tenwon10
- Re: Overconstraint problem and geostatic step, Darwid Halim
  - Re: Overconstraint problem and geostatic step, tenwon10
hi, gr_unni
- Re: hi, Timmy Horgan
Hyperelastic material, ravindran_manoharan
- Re: Hyperelastic material, Jin Young Kim
- Re: Hyperelastic material, Vishwanath S
Local Axes, Cem Haydaroglu
- Re: Local Axes, BenZ
help for Abaqus CAE, wukuanyang
Problem with linking, Pawel Rucki
Prestress, wisonyang
error code 5, hariton
- Re: error code 5, fernandocachonerin
  - Re: Re: error code 5, Ana Vila Verde
    - Re: Re: error code 5, Ilia Hariton
    - Re: Re: error code 5, Uday komaragiri
    - Re: Re: error code 5, Darwid Halim
    - Re: Re: error code 5, Ilia Hariton
Explicit errors., jazz_sameer
- Re: Explicit errors., amarendraatre
- Re: Explicit errors., mukul agnihotri
Subroutine MPC to realize *mpc,tie?, łÂ»˘
Re: cae\python groups, Richard
- Abnormal program termination (Signal 6), Kent Salomonsson
illegal memory, meyh2002
- BenZ, do you have any comments?, meyh2002
  - Re: BenZ, do you have any comments?, BenZ
    - Re: BenZ, do you have any comments?, meyh2002
    - Re: Re: BenZ, do you have any comments?, Sridhar R Setty
    - Re: BenZ, do you have any comments?, BenZ
    - Contour plot of Equivalent Plastic Strain, Amir Siddiq
    - Re: Contour plot of Equivalent Plastic Strain, BenZ
  - Re: BenZ, do you have any comments?, meyh2002
    - Re: BenZ, do you have any comments?, BenZ
    - Re: BenZ, do you have any comments?, meyh2002
    - Re: BenZ, do you have any comments?, BenZ
Residual stress analysis of composites, Divakar basavaraju
- Re: Residual stress analysis of composites, Steve Manifold
Shear heating with *CREEP algorithm, Gabriele Morra
Some problems about reinforced concrete modelling, albertzycn
ELEMENT DELETION (Shear failure), Albert Medina
- Re: ELEMENT DELETION (Shear failure), BARGE Matthieu
  - Re: ELEMENT DELETION (Shear failure), BenZ
    - Re: ELEMENT DELETION (Shear failure), zaghbani_imed
Problems while importing, mukul agnihotri
A question to BenZ, mothu_k
- problem Exporting files from Proe to Abaqus, kedar kanago
- Re: A question to BenZ, BenZ
Help on Connector modelling, ravindran_manoharan
Help on error, Francisco Javier Garcia Gonzalez
Rebar Layer as an Embedded Element, Finite Element Analysis
How to write data into a user defined file using subroutines, reddypsreedhar
- Re: How to write data into a user defined file using subroutines, george jefferson
  - Re: How to write data into a user defined file using subroutines, puchhala reddy
    - Re: How to write data into a user defined file using subroutines, Dale Li
- Re: How to write data into a user defined file using subroutines, Dave Lindeman
- Re: How to write data into a user defined file using subroutines, BenZ
  - Re: How to write data into a user defined file using subroutines, BenZ
Help for problem on VUMAT, linfazhu
- Re: Help for problem on VUMAT, BenZ
Material properties, Cem Haydaroglu
how to batch abaqus tasks using DOS batch file under ABAQUS/Command?, Guo Yongjin
- RE: how to batch abaqus tasks using DOS batch file under ABAQUS/Command?, Ian
- RE: how to batch abaqus tasks using DOS batch file under ABAQUS/Command?, Kent Salomonsson
- RE: how to batch abaqus tasks using DOS batch file under ABAQUS/Command?, P, Murali \(Research, consultant\)
AW: animation, Brenner, Achim
Re: Re: plane stress/plane strain thickness (Question added), F. Ding
animation, Denis McCrohan
- Re: animation, acosa_feira
hyperelastic material constants, sunnweii
- Re: hyperelastic material constants, sunnweii
masonry shear wall, czzsxy
incompressible hyperelasticity - different abaqus versions ??????, hariton
- Re: incompressible hyperelasticity - different abaqus versions ??????, fernandocachonerin
  - Re: Re: incompressible hyperelasticity - different abaqus versions ??????, hariton
- Reposting - incompressible hyperelasticity - different abaqus versions ??????, hariton
Re: Creep deformation, meyh2002
Import from explicit to standard, mukul agnihotri
- RE: Import from explicit to standard, Dailey, Dan
  - Re: RE: Import from explicit to standard, mukul agnihotri
- Re: Import from explicit to standard, Nader Ghareeb
  - Re: Import from explicit to standard, hancenleung
RE: error msgs and direction cosines, Sridharan
***a problem about orphan mesh in ABAQUS CAE***, Sun Wei
- Re: ***a problem about orphan mesh in ABAQUS CAE***, acosa_feira
  - Re: ***a problem about orphan mesh in ABAQUS CAE***, Sun Wei
Pretensioning of steel bolt/reinforcement, ravindran_manoharan
- Re: Pretensioning of steel bolt/reinforcement, SONJOY DAS
  - Re: Pretensioning of steel bolt/reinforcement, Ravindran Manoharan
- Re: Pretensioning of steel bolt/reinforcement, SONJOY DAS
(unknown), hariton
- (unknown), Vishwanath S
- (unknown), Brian Riordan
Prestress Member, David Loke
- Prestress Member, David Loke
Hourglassing, Mary Doorly
- Re: Hourglassing, Gareth Jones
  - RE: Hourglassing, Mary Doorly
    - Re: Hourglassing, Timmy Horgan
    - Re: Hourglassing-Apologies!, Timmy Horgan
Modeling screw threads with interference fit?, mr+brown
forming analysis, praba haran
- Re: forming analysis, acosa_feira
Re: Help on 3D modelling, acosa_feira
Re:  Hope your suggestion about Umat for composite&n`, łÂ»˘