mathematics.abaqus.user (thread)

Help on explicit, meyh2002
Help for creating animation in Viewer, astlaia2002
cover a plate with another material, Narcis
- Re: cover a plate with another material, ravindran_manoharan
Column Splice, Liang Deng
Cracking output when using Damaged Plasticity model, aba qus
- Re: Cracking output when using Damaged Plasticity model, aba qus
  - Re: Cracking output when using Damaged Plasticity model, nandor_mago
Material properties, Denis McCrohan
- Re: Material properties, Sam Lee
NO COMPRESSION OPTION IS NOT SUPPORTED, David Loke
- Re: NO COMPRESSION OPTION IS NOT SUPPORTED, BenZ
Re: running the analysis directly from *.inp, Ana Vila Verde
Any one knows gradient-dependent plasticity?help on UEL!, mechanics007
- Re: Any one knows gradient-dependent plasticity?help on UEL!, JUAN GOMEZ
(unknown), A K Seran
- (unknown), amarendraatre
How to use NO Compression Option for a Beam Element, Loke Chee Wui
model change, lockenbau
cry for help, xiaoyan long
- Re: cry for help, benjamin_hagege
  - Re: Re: cry for help, xiaoyan long
    - Re: cry for help, BenZ
- Re: cry for help, Doru Cantemir
  - Re: cry for help, xiaoyan long
How to access Compatability matrix into a User Subroutine, reddypsreedhar
- Re: How to access Compatability matrix into a User Subroutine, benjamin_hagege
usage of *foundation and implementation, antonchenlee
Combining uniaxial test data, Dimitri Debruyne
HOW TO USE SPOT WELDS, ferro1001
Please help using Rigid Bodies an Reference Points, irenemengual
- Re: Please help using Rigid Bodies an Reference Points, acosa_feira
contact between a rigid body and an eroding solid, BARGE Matthieu
- Re: contact between a rigid body and an eroding solid, irene mengual
Expansion Allowance in Axi-Symmetry structures, acosa_feira
Problems about getting current temperature and stress at current increment, not previous increment in user defined subroutine USDFLD, xiaoyan long
- problem use of subroutine programme- help me, velu perumal
material failure, Doug Caine
problem during running UMAT, meyh2002
- Re: problem during running UMAT, basus
  - Re: problem during running UMAT, meyh2002
    - Re: Re: problem during running UMAT, Shiladitya Basu
- Re: problem during running UMAT, benjamin_hagege
  - Re: problem during running UMAT, meyh2002
    - Re: problem during running UMAT, benjamin_hagege
    - Re: problem during running UMAT, meyh2002
    - Re: problem during running UMAT, benjamin_hagege
    - Re: problem during running UMAT, meyh2002
    - Re: problem during running UMAT, benjamin_hagege
  - Re: problem during running UMAT, meyh2002
    - Re: problem during running UMAT, benjamin_hagege
    - Re: problem during running UMAT, meyh2002
Von Mises stress output, sreevani_abbaraju
VIRTUAL TOPOLOGY (II), ferro1001
help, xiaoyan long
- help, xiaoyan long
Ideas on how to model bearing plate, ravindran_manoharan
Re: Von Mises stress calculation from frequency analysis.], Mary Baker
Free Web Seminars on ABAQUS Topics, Dick Rotelli
Cosserat's continuum with Abaqus ?, benjamin_hagege
- Re: Cosserat's continuum with Abaqus ?, JUAN GOMEZ
  - Re: Cosserat's continuum with Abaqus ?, benjamin_hagege
    - Re: Re: Cosserat's continuum with Abaqus ?, JUAN GOMEZ
    - Re: Cosserat's continuum with Abaqus ?, benjamin_hagege
    - Re: Re: Cosserat's continuum with Abaqus ?, JUAN GOMEZ
    - Re: Re: Cosserat's continuum with Abaqus ?, Narcis
    - Re: Cosserat's continuum with Abaqus ?, benjamin_hagege
VIRTUAL TIPOLOGY, ferro1001
- Re: VIRTUAL TIPOLOGY, Narcis
strange output file, Narcis Ursache
DFGRD1 in UMAT, wisonyang
- Re: DFGRD1 in UMAT, benjamin_hagege
open file with extention of fil, wisonyang
- RE: open file with extention of fil, Danny L Levine
- Re: open file with extention of fil, george jefferson
Map solution - void volume fraction, AbaqusUser
Normal direction of elment-based surface, wisonyang
I need material property, suman kumar
- Re: I need material property, Sam Lee
  - Re: I need material property, suman kumar
Re: Merging nodes in CAE v6.4- BC question added, SONJOY DAS
- Re: Merging nodes in CAE v6.4- BC question added, YANG WEI
  - Re: Thank you (Merging nodes in CAE v6.4- BC question added), ravindran_manoharan
Strain tensor transformation, albertoba2003
- Re: Strain tensor transformation, benjamin_hagege
- Re: Strain tensor transformation, minghui_ub
- Re:Re: Strain tensor transformation, albyrton\@libero\.it
  - Re:Re: Strain tensor transformation, benjamin_hagege
Quick question on merging nodes in CAE v6.4, ravindran_manoharan
- Re: Quick question on merging nodes in CAE v6.4, SONJOY DAS
  - Merging nodes in CAE v6.4- BC question added, ravindran_manoharan
What does this contact message mean?, xman_speeding
- RE: What does this contact message mean?, Sridharan
ambiguity in stress values, sreevani_abbaraju
- Re: ambiguity in stress values, gatogris
Geotechnical design of a deep tunnel, maximkarasev
- Re: Geotechnical design of a deep tunnel, Darwid Halim
RE:, Sachin P. Budhabhatti
Contact area, Ajith Ramesh
- Re: Contact area, Timmy Horgan
boundary conditions for torque on segment, mattias_widmark
- RE: boundary conditions for torque on segment, YANG WEI
rpy file, sameer
- Re: rpy file, acosa_feira
Chattering, xman_speeding
- Re: Chattering, acosa_feira
Debugg UMAT, meyh2002
- Re: Debugg UMAT, Shiladitya Basu
Pole Model Help, Bhairavi
Loading function and history output in CAE, ravindran_manoharan
- example problem (input file), Srikanth Borra
  - Re: example problem (input file), benjamin_hagege
    - Re: Re: example problem (input file), Srikanth Borra
    - Re: example problem (input file), benjamin_hagege
    - Re: Re: example problem (input file), Srikanth Borra
    - Re: Re: example problem (input file), Shiladitya Basu
about mode III stress intensity factor, krishna kishore
Different coordinates system, samer_tawfik
- Re: Different coordinates system, benjamin_hagege
- Re: Different coordinates system, Samer Adeeb
- RE: Different coordinates system, Roger Keene
  - Re: Different coordinates system, benjamin_hagege
output displacements in cylindrical system, wisonyang
- Re: output displacements in cylindrical system, benjamin_hagege
A question about fail stress, irenemengual
importing ANSYS models into ABAQUS, pieper_chris
- Re: importing ANSYS models into ABAQUS, Dave Lindeman
  - Re: importing ANSYS models into ABAQUS, pieper_chris
    - Re: Re: importing ANSYS models into ABAQUS, Dave Lindeman
- Re: importing ANSYS models into ABAQUS, BIRAB BIRAB
- RE: importing ANSYS models into ABAQUS, Pieper, Chris
  - Re: importing ANSYS models into ABAQUS, Dave Lindeman
- RE: Re: importing ANSYS models into ABAQUS, Pieper, Chris
RE: Python Scripting, Pieper, Chris
- RE: Python Scripting, Martin Sherburn
release constraints at second step, wisonyang
- Re: release constraints at second step, george jefferson
  - Re: release constraints at second step, Darwid Halim
- Re: release constraints at second step, Fernando Romero Marina
Glassfibre and Plywood properties, ferro1001
- Re: Glassfibre and Plywood properties, george jefferson
RE: video-please help. Question added!!, george jefferson
- RE: video-please help. Question added!!, Sachin P. Budhabhatti
  - Re: video-please help. Question added!!, Thomas Zander
  - Re: video-please help. Question added!!, acosa_feira
    - RE: Re: video-please help. Question added!!, Sachin P. Budhabhatti
- RE: video-please help. Question added!!, Towse, Adam
Help on Dynamic analysis, ravindran_manoharan
- RE: Help on Dynamic analysis, Nigel Butler
  - Re: Help on Dynamic analysis, ravindran_manoharan
Initial Temperature in an Abaqus python script, Gabriele Morra
video-please help, Denis McCrohan
- Re: video-please help, Narcis Ursache
- RE: video-please help. Question added!!, Sachin P. Budhabhatti
- Re: video-please help, Abd. Rahim
- Re: video-please help, X Man
HCRIT value, xman_speeding
- Re: HCRIT value, benjamin_hagege
  - Re: HCRIT value, xman_speeding
    - Re: HCRIT value, sreevani_abbaraju
- Re: HCRIT value, amarendraatre
Contact analysis, Kannan Subramanian
- Re: Contact analysis, amarendraatre
- Re: Contact analysis, Abd. Rahim
  - Re: Contact analysis, Ajith Ramesh
    - Re: Contact analysis, Abd. Rahim
Aside: Use Gmail for convenience!, Uday komaragiri
- Re: Aside: Use Gmail for convenience!, parampal singh
- Re: Aside: Use Gmail for convenience!, spacedude1423
  - Re: Aside: Use Gmail for convenience!, benjamin_hagege
  - Forget Gmail, use this proggy if under win2k, benjamin_hagege
    - Re: Forget Gmail, use this proggy if under win2k, mechanics007
fail stress, irenemengual
contact controls, amarendraatre
- Re: contact controls, benjamin_hagege
varibles in subroutine UMAT, wisonyang
- Re: varibles in subroutine UMAT, Master Frank aka Frank Richter
  - Strain Energy Frequency Analysis, Nigel Butler
- Re: varibles in subroutine UMAT, Shiladitya Basu
  - Re: varibles in subroutine UMAT, meyh2002
    - Re: varibles in subroutine UMAT, benjamin_hagege
    - Re: varibles in subroutine UMAT, meyh2002
    - Re: Re: varibles in subroutine UMAT, Shiladitya Basu
CAE/Input conflict..., spacedude1423
what matter with zero.vol.flux, ghostfql2000
- Re: what matter with zero.vol.flux, ghostfql2000
Advice on Nonlinear modelling., ravindran_manoharan
Acceleration excite point in earthquake simulation, GUO YAN
In UEL How to define this set of degrees of freedom?, mechanics007
- Re: In UEL How to define this set of degrees of freedom?, Uday komaragiri
  - Re: In UEL How to define this set of degrees of freedom?, civil xu
    - Re: In UEL How to define this set of degrees of freedom?, minghui_ub
    - Re: In UEL How to define this set of degrees of freedom?, Uday komaragiri
    - Re: In UEL How to define this set of degrees of freedom?, mechanics007
Defining beam properties, orhancicek
- Re: Defining beam properties, Narcis Ursache
  - Re: Defining beam properties, orhancicek
Advice on Modelling of gaps, ravindran_manoharan
- Re: Advice on Modelling of gaps, bhaskara dp
back stress, toledo_indian
How can I reda *.fil file by user program, mar
Strain Vs. Stress Graph, mothu_k
VUMAT and Strain energy density, John M. Qian
- Re: VUMAT and Strain energy density, benjamin_hagege
  - Re: Re: VUMAT and Strain energy density, John M. Qian
    - Re: VUMAT and Strain energy density, benjamin_hagege
contact convergence issue, amarendraatre
- Re: contact convergence issue, benjamin_hagege
  - Soil Consolidation issue, Darwid Halim
  - Re: contact convergence issue, jbsauce
    - Re: contact convergence issue, amarendraatre
- ABAQUS EXPLICIT hourglassing, Utpal Borah
  - Re: ABAQUS EXPLICIT hourglassing, benjamin_hagege
Rotational DOFs in Contact, Sridharan
Warning while requesting element output with position=nodes option, Sridharan
- Re: Warning while requesting element output with position=nodes option, Shiladitya Basu
can I connect SOLID element with TRUSS element?, fengjihang
- Re: can I connect SOLID element with TRUSS element?, Darwid Halim
Re: UMAT with ABAQUS 6.4, jens_f_meier
- How to suppress the output of warning messages, sam lee
Re: Submitting Jobs Using Plink, Narcis Ursache
- RE: Submitting Jobs Using Plink, Nigel Butler
nodal forces?, mc_ewans1974
- Re: nodal forces?, linksback
  - Re: nodal forces?, mc_ewans1974
    - Re: Re: nodal forces?, Narcis Ursache
    - Re: Re: nodal forces?, Shiladitya Basu
*DEBOND criteria, Denis McCrohan
Local coordinate system, irenemengual
Requesting element output when modeling surface erosion, irenemengual
- Re: Requesting element output when modeling surface erosion, Dave Lindeman
Contact problem, Ibrahim iflefel
How to understand these strain mesures in abaqus, ghostfql2000
- Re: How to understand these strain mesures in abaqus, ghostfql2000
  - Re: How to understand these strain mesures in abaqus, benjamin_hagege
Methods in Failure Simulation, wlightw
- Re: Methods in Failure Simulation, Zanotelli Gian Luigi
  - Re: Methods in Failure Simulation, wlightw
    - Re: Re: Methods in Failure Simulation, yann youmans
element/node numbers, Denis McCrohan
- Re: element/node numbers, amarendraatre
- Re: element/node numbers, Abd. Rahim
Re: help please! the usage of pnewdt, AbaqusUser
- Re: help please! the usage of pnewdt, sfeih
Get nodes from surface using python?, Martin Sherburn
- Re: Get nodes from surface using python?, dzivdzan
- RE: Get nodes from surface using python?, Pieper, Chris
  - Re: Get nodes from surface using python?, spacedude1423
Test data from compressive test and tensile test, Jan Schelstraete
- Re: Test data from compressive test and tensile test, sfeih
encounter one problem, zhe troy
surface faces, Denis McCrohan
- Re: surface faces, Dave Lindeman
  - Mass scaling, irene mengual
    - Re: Mass scaling, hubhub
    - Re: Mass scaling, amarendraatre
Re: Geostatic step, lockenbau
- RE: Re: Geostatic step, Pierre Burgers
- Re: Re: Geostatic step, dzivdzan
FORCED_CONVECTION PROBLEM...., s kantharaju
how to apply connector (weld type) to circle entity, wutthi_m
- Re: how to apply connector (weld type) to circle entity, wlightw
Pressure between two Parts, Monique Albrand
- Re: Pressure between two Parts, Dave Lindeman
FEMAP, iwtm16
- Re: FEMAP, J.M. Zappettini
RE: A Bug in my VUMAT subroutine, (fabri) done ugarte
Gap element, stephan_holzer
Need Help: Windows XP sp2 firewall setting for lmgrd license server., prukcmu
- Re: Need Help: Windows XP sp2 firewall setting for lmgrd license server., fernandocachonerin
Please be aware about cracked versions of Abaqus, musatf
How to apply moment to a hollow cylinder, bainite2000
- Re: How to apply moment to a hollow cylinder, dzivdzan
Re: Complex eigenvalue extraction, linksback
- RE: Re: Complex eigenvalue extraction, John Lightner
Re: Nitinol, VIKRAM DHRUVA
- RE: Nitinol, Fabio Geraci
  - RE: Nitinol, Sam Lee
  - RE: Nitinol, Sam Lee
    - RE: Nitinol, Fabio Geraci
Contact problem in Abaqus/Standard, Maurizio