mathematics.abaqus.user (thread)

Fwd: FW: How to get started in ABAQUS, Florin Musat
Advice needed in stitched sandiwch composite modeling, paramsocool
AW: Seeking Advice - Force Output at Nodal Locations, Brenner, Achim
New Element Formulation, getsudhir
Riks, stephan_holzer
Nitinol, mothu_k
AW: Re: Seeking Advice - Force Output at Nodal Locations, Brenner, Achim
submodeling coupled pore pressure and displacement, mul
Explicit and Contact element, Abd. Rahim
Impact in a composite material, irenemengual
Re: Erosion of surface specified on solids elements, irenemengual
- Re: Re: Erosion of surface specified on solids elements, Dave Lindeman
Complex eigenvalue extraction, linksback
- Re: Complex eigenvalue extraction, Abd. Rahim
UMAT for Nitinol, mothu_k
Python Scripting, Martin Sherburn
Submitting Jobs Using Plink, Nigel Butler
- Re: Submitting Jobs Using Plink, janakiramaraju penemitsa
Geostatic step, natasa018
how to assign beam element which share the nodes with shell in CAE, lilyma01
- Re: how to assign beam element which share the nodes with shell in CAE, BIRAB BIRAB
Seeking Advice - Force Output at Nodal Locations, jwhite86
- Re: Seeking Advice - Force Output at Nodal Locations, benjamin_hagege
  - Re: Seeking Advice - Force Output at Nodal Locations, jwhite86
    - Geostatic strains, dzivdzan
- Re: Seeking Advice - Force Output at Nodal Locations, J.L. Tan
Modeling between connector and PCB, J.L. Tan
AW: deformed shape without stresses, Brenner, Achim
can output 'voidr' only be outputed in consolidation procedure?, ghostfql2000
- Re: can output 'voidr' only be outputed in consolidation procedure?, lockenbau
Residual stress in extrusion, AbaqusUser
Mode shapes, ravindran_manoharan
- RE: Mode shapes, Chen, Qingshan (Frank)
Which is the difference for a contact analysis between TIED and FRICTION=ROUGH, guga_y
- deformed shape without stresses, Thomas Zander
  - Re: deformed shape without stresses, antonchenlee
  - Re: deformed shape without stresses, acosa_feira
A Bug in my VUMAT subroutine, Nitin
- Re: A Bug in my VUMAT subroutine, benjamin_hagege
  - Re: Re: A Bug in my VUMAT subroutine, Nitin
Re: "Reaction" force, Lanre Bolarinwa
Impact Force, J.L. Tan
- Re: Impact Force, mattias_widmark
  - Re: Re: Impact Force, J.L. Tan
    - Re: Re: Impact Force, Mary Baker
    - Re: Re: Impact Force, J.L. Tan
- Re:Impact Force, Manish Virmani
Riks Method, michael dowhopoluk
cohesion in an earth dam, lockenbau
- RE: cohesion in an earth dam, Behzad
  - RE: cohesion in an earth dam, Carsten Bothe
    - Re: cohesion in an earth dam, lockenbau
Can anyone help me, krishna kishore
- Re: Can anyone help me, arvind singh
  - Re: Can anyone help me, Sam Lee
Question about RHS and DU(K1,KRHS)in UEL,thanks!, mechanics007
- Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, george jefferson
  - Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, mechanics007
    - Re: Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, george jefferson
    - Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, mechanics007
- Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, uday komaragiri
  - Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, mechanics007
    - Re: Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, minghui_ub
    - Re: Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, uday komaragiri
how to view stresses inside a 3D model by cutting it along a plane?, bharat reddy
- Re: how to view stresses inside a 3D model by cutting it along a plane?, J.L. Tan
- Re: how to view stresses inside a 3D model by cutting it along a plane?, acosa_feira
Re: conversion: displacement,acceleration to sound pressure level, SONJOY DAS
- Re: conversion: displacement,acceleration to sound pressure level, Abd. Rahim
- Re: conversion: displacement,acceleration to sound pressure level, SONJOY DAS
  - boundary condition for a cylindralic model, hubhub
    - Re: boundary condition for a cylindralic model, george jefferson
    - Re: boundary condition for a cylindralic model, acosa_feira
  - Re: conversion: displacement,acceleration to sound pressure level, Abd. Rahim
- Re: conversion: displacement,acceleration to sound pressure level, SONJOY DAS
  - Re: conversion: displacement,acceleration to sound pressure level, Abd. Rahim
Crystal plasticity, Nitin
Modulus of elasticity and abaqus, advancedfun2000
- Re: Modulus of elasticity and abaqus, Shiladitya Basu
  - Re: Modulus of elasticity and abaqus, advancedfun2000
Linking Fortran 6.5 with ABAQUS, behzad
- Re: Linking Fortran 6.5 with ABAQUS, Ana Vila Verde
  - Re: Linking Fortran 6.5 with ABAQUS, Ana Vila Verde
Contact damping implementation, Manish Virmani
- Re: Contact damping implementation, qinghua yang
References on ABAQUS theory manual section 4.6.1, sunnweii
unloading curve of conical indentation, dominikherkommer
Overall stress-strain curve, Arun S
How to model a fastener??, guga_y
- RE: How to model a fastener??, Sridharan
  - Re: How to model a fastener??, guga_y
    - RE: Re: How to model a fastener??, Sridharan
    - conversion: displacement,acceleration to sound pressure level, abd rahim abu bakar
    - How to get started in ABAQUS, hamdan yuafin as'at
    - Re: How to get started in ABAQUS, Guillermo A. Narsilio
    - Re: How to get started in ABAQUS, BIRAB BIRAB
    - Re: How to get started in ABAQUS, benjamin_hagege
    - Re: How to get started in ABAQUS, amarendraatre
    - Re: How to model a fastener??, guga_y
    - RE: Re: How to model a fastener??, Sridharan
- How to model composit withe random fiber?, shahram h
  - Re: How to model composit withe random fiber?, benjamin_hagege
    - Re: Re: How to model composit withe random fiber?, shahram h
    - Re: Re: How to model composit withe random fiber?, george jefferson
- RE: Re: How to model a fastener??, guga pepe
RE: Re: How is it possible ......Load right, displacemnt left?????....., guga pepe
how to deal with the sign of stress and strain in umat?, ghostfql2000
- Re: how to deal with the sign of stress and strain in umat?, benjamin_hagege
  - Re: how to deal with the sign of stress and strain in umat?, ghostfql2000
    - Re: how to deal with the sign of stress and strain in umat?, benjamin_hagege
RE: contour integration problem ?, visualdzivdzan
Poll Results, advancedfun2000
- Re: Poll Results, benjamin_hagege
smeared cracking, baluiitk
how to add other Degrees of freedom in UEL?, mechanics007
- Re: how to add other Degrees of freedom in UEL?, benjamin_hagege
  - Re: how to add other Degrees of freedom in UEL?, mechanics007
    - Re: how to add other Degrees of freedom in UEL?, benjamin_hagege
- Re: how to add other Degrees of freedom in UEL?, Dave Lindeman
  - Re: how to add other Degrees of freedom in UEL?, mechanics007
More Contact Problem, Liang Deng
- Re: More Contact Problem, benjamin_hagege
  - contour integration problem ?, sri p
- Re: More Contact Problem, Cheng-Kong Wu
  - Initial conditions:displacement, Abd. Rahim
    - Re: Initial conditions:displacement, benjamin_hagege
- RE: More Contact Problem, visualdzivdzan
  - Re: More Contact Problem, benjamin_hagege
- RE: Re: More Contact Problem, visualdzivdzan
How is it possible ......Load right, displacemnt left?????.....BENZ, guga_y
- Re: How is it possible ......Load right, displacemnt left?????.....BENZ, benjamin_hagege
- RE: Re: How is it possible ......Load right, displacemnt left?????.....BENZ, guga pepe
  - Re: How is it possible ......Load right, displacemnt left?????.....BENZ, benjamin_hagege
request stress components at arbitrary location?, mc_ewans1974
- Re: request stress components at arbitrary location?, benjamin_hagege
surface-to-surface contact with to shells, antonchenlee
- Re: surface-to-surface contact with to shells, benjamin_hagege
  - Re: surface-to-surface contact with to shells, antonchenlee
Jaumann stress, iwtm16
- Re: Jaumann stress, benjamin_hagege
Re: unable to edit input file, Manish Virmani
- Re: unable to edit input file, Gareth Jones
  - Re: unable to edit input file, benjamin_hagege
    - Re: Re: unable to edit input file, Arun Ramasetty
Choose nodes on lines without endpoints, Jake Blanchard
- Re: Choose nodes on lines without endpoints, benjamin_hagege
- RE: Choose nodes on lines without endpoints, Roger Keene
Some doubts about the displacements' results in a two step simulation, guga_y
- unable to edit input file, Arun Ramasetty
  - Re: unable to edit input file, benjamin_hagege
  - Re: unable to edit input file, mattias_widmark
  - Re: unable to edit input file, dzivdzan
- Re: Some doubts about the displacements' results in a two step simulation, benjamin_hagege
  - Re: Some doubts about the displacements' results in a two step simulation, guga_y
    - Re: Some doubts about the displacements' results in a two step simulation, benjamin_hagege
    - Re: Some doubts about the displacements' results in a two step simulation, guga_y
*Boundary only for positive x axis, Rajil Saraswat
- Re: *Boundary only for positive x axis, benjamin_hagege
- Re: *Boundary only for positive x axis, SONJOY DAS
  - Re: *Boundary only for positive x axis, Rajil Saraswat
    - Re: *Boundary only for positive x axis, barryodonnell2003
    - Re: *Boundary only for positive x axis, Rajil Saraswat
ABAQUS/Explicit: Units and Mass Factor, Qing Li
- Re: ABAQUS/Explicit: Units and Mass Factor, benjamin_hagege
- Re: ABAQUS/Explicit: Units and Mass Factor, Ana Vila Verde
- Re: ABAQUS/Explicit: Units and Mass Factor, Fernando Romero Marina
"Illegal floating point operation" (signal 8), Ana Vila Verde
biphasic analysis with consolidation, crin_jon
- Re: biphasic analysis with consolidation, smita
Simulating tire dynamic forces, melseifi
- RE: Simulating tire dynamic forces, fuzzyRebuaz
why a circle is shown as an ellipse in CAE?, Li Ke
- Re: why a circle is shown as an ellipse in CAE?, acosa_feira
  - Re: Re: why a circle is shown as an ellipse in CAE?, Shiladitya Basu
ABAQUS group poll, advancedfun2000
zero volume flux, smita
- Re: zero volume flux, benjamin_hagege
  - Re: Re: zero volume flux---thanks benz!, smita
Modelling of Reinforcred cocrete beams, baluiitk
Abaqus modelling? Is it possible?, advancedfun2000
- RE: Abaqus modeling? Is it possible?, Behzad
Re: soil strength increase with depth model, advancedfun2000
Pretention Problem, Liang Deng
- Re: Pretention Problem, Cheng-Kong Wu
- Re: Pretention Problem, sridharv
- Re: Pretention Problem, Gareth Jones
  - How to show the contour results with one instance of assembly in ABAQUS/CAE, Guoqing Wang
    - Re: How to show the contour results with one instance of assembly in ABAQUS/CAE, Kausik Mitra
    - Re: How to show the contour results with one instance of assembly in ABAQUS/CAE, qunsingcn
how to get a meshed model from ansys to abaqus, bharat reddy
Proximity check for nodes, Ibrahim Johar
- Re: Proximity check for nodes, acosa_feira
  - Re: Re: Proximity check for nodes, Ibrahim Johar
- Re: Proximity check for nodes, acosa_feira
Friction on shells, Martin Gillie
Limiting of file sizes, ajowsey007
- Re: Limiting of file sizes, Amir Siddiq
  - Re: Limiting of file sizes, Ana Vila Verde
- Re: Limiting of file sizes, Cheng-Kong Wu
- Re: Limiting of file sizes, Venkataramanan Sridharan
  - Re: Limiting of file sizes, ajowsey007
- Re: Limiting of file sizes, mattias_widmark
problem with linking subroutine, behzad
- Re: problem with linking subroutine, cathay
contact problem, Li Ke
- Re: contact problem, Amir Siddiq
  - Re: contact problem, Li Ke
- Re: contact problem, varma nsp
  - Re: contact problem, Venkataramanan Sridharan
    - Re: contact problem, varma nsp
    - Re: contact problem, Venkataramanan Sridharan
  - Re: contact problem, benjamin_hagege
    - Re: Re: contact problem, varma nsp
- Contact Problem, jbsauce
  - Re: Contact Problem, benjamin_hagege
    - Re: Contact Problem, jbsauce
Plastic Hardening Law, mothu_k
- Re: Plastic Hardening Law, Ratko Veprek
- Re: Plastic Hardening Law, benjamin_hagege
Analysis of Reinforced Concrete beams with repair materials in compression and tension sides, I BalaKrishna
Abaqus problem with fortran user subroutines, Baskaran
- Re: Abaqus problem with fortran user subroutines, fernandocachonerin
initial conditions and pore pressure, yabaqus
- Re: initial conditions and pore pressure, yabaqus
- feild output, yabaqus
- RE: Re: initial conditions and pore pressure, visualdzivdzan
normal mode analysis, Murali Pandi
- Re: normal mode analysis, benjamin_hagege
- Re: Re: normal mode analysis, SONJOY DAS
Map Solution Problem - SDV, VVF ?, AbaqusUser
Strain Increment, Amir Siddiq
- Re: Strain Increment, benjamin_hagege
Accelerated quasi-static (fire) analysis of concrete in Explicit?, nandor_mago
Re: Dynamic Analysis, ravindran_manoharan
- Re: Dynamic Analysis, acosa_feira
Re: Hill's Anisotropic Material, benjamin_hagege
- Re: Hill's Anisotropic Material, benjamin_hagege
  - Thanks a Lot BenZ, mothu_k