|
|
August 31, 2004
- Re: Submitting Jobs Using Plink, janakiramaraju penemitsa
- Fwd: FW: How to get started in ABAQUS, Florin Musat
- Re: Re: Erosion of surface specified on solids elements, Dave Lindeman
- Re: Complex eigenvalue extraction, Abd. Rahim
- Re: deformed shape without stresses, acosa_feira
- Advice needed in stitched sandiwch composite modeling, paramsocool
- AW: Seeking Advice - Force Output at Nodal Locations, Brenner, Achim
- Re: can output 'voidr' only be outputed in consolidation procedure?, lockenbau
- New Element Formulation, getsudhir
- Re: Seeking Advice - Force Output at Nodal Locations, J.L. Tan
- Riks, stephan_holzer
- Nitinol, mothu_k
- Geostatic strains, dzivdzan
- AW: Re: Seeking Advice - Force Output at Nodal Locations, Brenner, Achim
- Re: deformed shape without stresses, antonchenlee
- Re: how to assign beam element which share the nodes with shell in CAE, BIRAB BIRAB
- submodeling coupled pore pressure and displacement, mul
- Explicit and Contact element, Abd. Rahim
- Impact in a composite material, irenemengual
- Re: Erosion of surface specified on solids elements, irenemengual
- Complex eigenvalue extraction, linksback
- UMAT for Nitinol, mothu_k
- Re: Contact Problem, jbsauce
- Re: cohesion in an earth dam, lockenbau
- Python Scripting, Martin Sherburn
- Submitting Jobs Using Plink, Nigel Butler
- Geostatic step, natasa018
August 25, 2004
- Seeking Advice - Force Output at Nodal Locations, jwhite86
- Modeling between connector and PCB, J.L. Tan
- AW: deformed shape without stresses, Brenner, Achim
- deformed shape without stresses, Thomas Zander
- can output 'voidr' only be outputed in consolidation procedure?, ghostfql2000
- Re: Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, uday komaragiri
- Re: Re: A Bug in my VUMAT subroutine, Nitin
- Re: Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, minghui_ub
- RE: Mode shapes, Chen, Qingshan (Frank)
August 24, 2004
- Residual stress in extrusion, AbaqusUser
- Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, mechanics007
- Mode shapes, ravindran_manoharan
- Which is the difference for a contact analysis between TIED and FRICTION=ROUGH, guga_y
- RE: cohesion in an earth dam, Carsten Bothe
- Re: Re: Impact Force, J.L. Tan
- Re:Impact Force, Manish Virmani
- Re: Re: Impact Force, Mary Baker
August 23, 2004
- Re: A Bug in my VUMAT subroutine, benjamin_hagege
- Re: Can anyone help me, Sam Lee
- Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, uday komaragiri
- A Bug in my VUMAT subroutine, Nitin
- Re: Re: Impact Force, J.L. Tan
- Re: "Reaction" force, Lanre Bolarinwa
- Re: Impact Force, mattias_widmark
- Re: Can anyone help me, arvind singh
- Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, mechanics007
August 20, 2004
- Re: Question about RHS and DU(K1,KRHS)in UEL,thanks!, george jefferson
- Re: conversion: displacement,acceleration to sound pressure level, SONJOY DAS
- Riks Method, michael dowhopoluk
- cohesion in an earth dam, lockenbau
- Can anyone help me, krishna kishore
- RE: Re: How to model a fastener??, Sridharan
- Question about RHS and DU(K1,KRHS)in UEL,thanks!, mechanics007
- Re: how to view stresses inside a 3D model by cutting it along a plane?, acosa_feira
- Re: boundary condition for a cylindralic model, acosa_feira
- Re: conversion: displacement,acceleration to sound pressure level, Abd. Rahim
- Re: how to view stresses inside a 3D model by cutting it along a plane?, J.L. Tan
August 19, 2004
- Re: boundary condition for a cylindralic model, george jefferson
- boundary condition for a cylindralic model, hubhub
- how to view stresses inside a 3D model by cutting it along a plane?, bharat reddy
- Re: conversion: displacement,acceleration to sound pressure level, SONJOY DAS
- Re: How to get started in ABAQUS, amarendraatre
- Re: How to get started in ABAQUS, benjamin_hagege
- Re: How to get started in ABAQUS, BIRAB BIRAB
- Re: How to get started in ABAQUS, Guillermo A. Narsilio
- Re: conversion: displacement,acceleration to sound pressure level, Abd. Rahim
- Re: How to model a fastener??, guga_y
- Re: conversion: displacement,acceleration to sound pressure level, SONJOY DAS
- How to get started in ABAQUS, hamdan yuafin as'at
August 17, 2004
- Re: How to model a fastener??, guga_y
- Re: Modulus of elasticity and abaqus, advancedfun2000
- Re: Modulus of elasticity and abaqus, Shiladitya Basu
- RE: How to model a fastener??, Sridharan
- Modulus of elasticity and abaqus, advancedfun2000
- Re: Linking Fortran 6.5 with ABAQUS, Ana Vila Verde
- Re: Linking Fortran 6.5 with ABAQUS, Ana Vila Verde
- Re: Contact damping implementation, qinghua yang
- Linking Fortran 6.5 with ABAQUS, behzad
- Contact damping implementation, Manish Virmani
- References on ABAQUS theory manual section 4.6.1, sunnweii
August 16, 2004
- unloading curve of conical indentation, dominikherkommer
- Overall stress-strain curve, Arun S
- How to model a fastener??, guga_y
- RE: Re: How is it possible ......Load right, displacemnt left?????....., guga pepe
- Re: surface-to-surface contact with to shells, antonchenlee
- Re: Initial conditions:displacement, benjamin_hagege
- Re: how to deal with the sign of stress and strain in umat?, benjamin_hagege
- Initial conditions:displacement, Abd. Rahim
- RE: Re: More Contact Problem, visualdzivdzan
- Re: how to deal with the sign of stress and strain in umat?, ghostfql2000
- Re: More Contact Problem, Cheng-Kong Wu
August 15, 2004
- RE: Simulating tire dynamic forces, fuzzyRebuaz
- Re: how to add other Degrees of freedom in UEL?, benjamin_hagege
- Re: More Contact Problem, benjamin_hagege
- Re: Poll Results, benjamin_hagege
- Re: how to deal with the sign of stress and strain in umat?, benjamin_hagege
- how to deal with the sign of stress and strain in umat?, ghostfql2000
- RE: contour integration problem ?, visualdzivdzan
- RE: More Contact Problem, visualdzivdzan
- Poll Results, advancedfun2000
- Re: how to add other Degrees of freedom in UEL?, mechanics007
- Re: how to add other Degrees of freedom in UEL?, mechanics007
August 13, 2004
- Re: how to add other Degrees of freedom in UEL?, Dave Lindeman
- Re: More Contact Problem, benjamin_hagege
- Re: How is it possible ......Load right, displacemnt left?????.....BENZ, benjamin_hagege
- Re: how to add other Degrees of freedom in UEL?, benjamin_hagege
- smeared cracking, baluiitk
- how to add other Degrees of freedom in UEL?, mechanics007
- Re: *Boundary only for positive x axis, Rajil Saraswat
- RE: Re: How is it possible ......Load right, displacemnt left?????.....BENZ, guga pepe
- More Contact Problem, Liang Deng
August 12, 2004
- Re: How is it possible ......Load right, displacemnt left?????.....BENZ, benjamin_hagege
- Re: request stress components at arbitrary location?, benjamin_hagege
- Re: surface-to-surface contact with to shells, benjamin_hagege
- Re: Contact Problem, benjamin_hagege
- Re: Jaumann stress, benjamin_hagege
- How is it possible ......Load right, displacemnt left?????.....BENZ, guga_y
- request stress components at arbitrary location?, mc_ewans1974
- Re: Some doubts about the displacements' results in a two step simulation, guga_y
- Contact Problem, jbsauce
- Re: Re: unable to edit input file, Arun Ramasetty
- surface-to-surface contact with to shells, antonchenlee
- Jaumann stress, iwtm16
- RE: Choose nodes on lines without endpoints, Roger Keene
- Re: unable to edit input file, benjamin_hagege
- Re: Choose nodes on lines without endpoints, benjamin_hagege
- Re: unable to edit input file, Gareth Jones
- Re: unable to edit input file, Manish Virmani
- Choose nodes on lines without endpoints, Jake Blanchard
August 11, 2004
- Re: Some doubts about the displacements' results in a two step simulation, benjamin_hagege
- Re: unable to edit input file, dzivdzan
- Re: Some doubts about the displacements' results in a two step simulation, guga_y
- Re: *Boundary only for positive x axis, barryodonnell2003
- Re: unable to edit input file, mattias_widmark
- Re: Some doubts about the displacements' results in a two step simulation, benjamin_hagege
- Re: unable to edit input file, benjamin_hagege
- unable to edit input file, Arun Ramasetty
- Re: Re: zero volume flux---thanks benz!, smita
- Some doubts about the displacements' results in a two step simulation, guga_y
- Re: ABAQUS/Explicit: Units and Mass Factor, Fernando Romero Marina
- Re: biphasic analysis with consolidation, smita
- Re: *Boundary only for positive x axis, Rajil Saraswat
August 06, 2004
- Re: zero volume flux, benjamin_hagege
- ABAQUS group poll, advancedfun2000
- Re: Re: Proximity check for nodes, Ibrahim Johar
- zero volume flux, smita
- Re: How to show the contour results with one instance of assembly in ABAQUS/CAE, Kausik Mitra
- Re: contact problem, Li Ke
- Modelling of Reinforcred cocrete beams, baluiitk
- Re: Proximity check for nodes, acosa_feira
- How to show the contour results with one instance of assembly in ABAQUS/CAE, Guoqing Wang
- Re: Pretention Problem, sridharv
- RE: Abaqus modeling? Is it possible?, Behzad
- Re: Pretention Problem, Cheng-Kong Wu
- Re: Pretention Problem, Gareth Jones
- Abaqus modelling? Is it possible?, advancedfun2000
- Re: soil strength increase with depth model, advancedfun2000
August 05, 2004
- Pretention Problem, Liang Deng
- how to get a meshed model from ansys to abaqus, bharat reddy
- Proximity check for nodes, Ibrahim Johar
- Re: Limiting of file sizes, mattias_widmark
- Re: problem with linking subroutine, cathay
- Re: Limiting of file sizes, Ana Vila Verde
- Re: contact problem, Venkataramanan Sridharan
- Re: Limiting of file sizes, Venkataramanan Sridharan
- Re: Limiting of file sizes, Cheng-Kong Wu
- Re: Limiting of file sizes, Amir Siddiq
- Re: contact problem, varma nsp
- Re: Re: contact problem, varma nsp
- Friction on shells, Martin Gillie
- Limiting of file sizes, ajowsey007
- problem with linking subroutine, behzad
- RE: Re: initial conditions and pore pressure, visualdzivdzan
August 04, 2004
- Re: contact problem, benjamin_hagege
- Re: Plastic Hardening Law, benjamin_hagege
- feild output, yabaqus
- Re: contact problem, Venkataramanan Sridharan
- Re: initial conditions and pore pressure, yabaqus
- Re: contact problem, varma nsp
- Re: Plastic Hardening Law, Ratko Veprek
- Re: contact problem, Amir Siddiq
- Re: Abaqus problem with fortran user subroutines, fernandocachonerin
- contact problem, Li Ke
August 03, 2004
- Plastic Hardening Law, mothu_k
- Analysis of Reinforced Concrete beams with repair materials in compression and tension sides, I BalaKrishna
- Re: Re: normal mode analysis, SONJOY DAS
- Re: normal mode analysis, benjamin_hagege
- Re: Strain Increment, benjamin_hagege
- Abaqus problem with fortran user subroutines, Baskaran
- initial conditions and pore pressure, yabaqus
- normal mode analysis, Murali Pandi
- Map Solution Problem - SDV, VVF ?, AbaqusUser
- Thanks a Lot BenZ, mothu_k
- Strain Increment, Amir Siddiq
- Accelerated quasi-static (fire) analysis of concrete in Explicit?, nandor_mago
- Re: Dynamic Analysis, acosa_feira
- Re: Dynamic Analysis, ravindran_manoharan
|
|
