mathematics.abaqus.user (thread)

Dynamic Analysis, ravindran_manoharan
- Re: Dynamic Analysis, benjamin_hagege
  - Re: Dynamic Analysis, ravindran_manoharan
    - Re: Dynamic Analysis, benjamin_hagege
    - Re: Dynamic Analysis, Sonjoy
    - Re: Dynamic Analysis, benjamin_hagege
- Re: Dynamic Analysis, SONJOY DAS
Coupling constraints in ABAQUS, bainite2000
gapuni elements and penalty faktor, antonchenlee
Erosion of surface specified on solids elements, irene_mengual
problems with displacements, Elisa Degiovanni
- RE: problems with displacements, Everett Kettle
Hill's Anisotropic Material, mothu_k
- Re: Hill's Anisotropic Material, Danny L Levine
  - mixed formulation in UMAT, hubhub
    - Re: mixed formulation in UMAT, benjamin_hagege
  - Re: Hill's Anisotropic Material, jw
    - Re: Hill's Anisotropic Material, benjamin_hagege
    - Hill's Anisotropic Material, mothu_k
FLOW of a liquid through porous media, Guillermo
biomedical applications, Saurabh Srivastava
- RE: biomedical applications, Sachin P. Budhabhatti
- RE: biomedical applications, Gortner, Matt
Mass scaling in dynamic analysis, Manish Virmani
- Re: Mass scaling in dynamic analysis, benjamin_hagege
  - Re: Mass scaling in dynamic analysis, Manish Virmani
- RE: Re: Mass scaling in dynamic analysis, fuzzyRebuaz
incoherence between S/E, Elisa Degiovanni
- Re: ```incoherence between S/E, Dave Lindeman
- Re: incoherence between S/E, benjamin_hagege
Laboratory Test, Grzegorz Brozek
- Re: Laboratory Test, Fernando Romero Marina
How to suppress the non-converged values?, yuchuan_tang
Abaqus, Denis McCrohan
Antw: Re: Nearly Incompressible Material, Christian Affolter
names, dzivdzan
about aqua, undersea_peter
- Re: about aqua, Maziar Mahzari
  - RE: about aqua, Roger Keene
    - Hi, sri p
    - RE: Hi, Sachin P. Budhabhatti
    - Re: Hi, Guillermo A. Narsilio
    - Re: Hi, dara ramesh
Question about Distributing Coupling, w_huang71
- Re: Question about Distributing Coupling, jw
  - Re: Question about Distributing Coupling, w_huang71
    - Re: Re: Question about Distributing Coupling, jw
HOW TO APPLY A DISTRIBUTED LOAD IN A DIRECTION DIFFERENT FROM THE NORMAL, guga_y
- Re: HOW TO APPLY A DISTRIBUTED LOAD IN A DIRECTION DIFFERENT FROM THE NORMAL, Narcis Ursache
  - Re: HOW TO APPLY A DISTRIBUTED LOAD IN A DIRECTION DIFFERENT FROM THE NORMAL, guga_y
soil analysis warning, smita
How to obtain Frequency response (FFT), ravindran_manoharan
A question regaring Eroding elements in an explicit calculation, jpwideberg
Proportional loading, dubuprince
- Re: Proportional loading, Danny L Levine
  - Re: Proportional loading, Celal Soyarslan
    - Re: Proportional loading, george jefferson
- Re: Proportional loading, Danny L Levine
Re: Your music, sr
abaqus 6.4-4 contact/connector element problem with 3d fatigue crack growth, msu_fea_guy
Modulus Unit, bainite2000
- Re: Modulus Unit, minghui_ub
- Re: Modulus Unit, Srikanth Pilla
- RE: Modulus Unit, Kamalesh Vasudeva
- Re: Modulus Unit, SONJOY DAS
URDFIL Subroutine, mothu_k
- Re: URDFIL Subroutine, Shreyas Nagaraj
  - RE: URDFIL Subroutine, Pierre Burgers
    - URDFIL; Thanks Burgers, mothu_k
    - Re: URDFIL Subroutine, benjamin_hagege
- RE: URDFIL Subroutine, (fabri) done ugarte
shell&bricks, Elisa Degiovanni
- Re: shell&bricks, Devin Huber
- Re: shell&bricks, benjamin_hagege
quasi-static questions, amarendraatre
- Re: quasi-static questions, benjamin_hagege
  - Re: quasi-static questions, amarendraatre
Batch mode, Narcis Ursache
- Re: Batch mode, amarendraatre
  - Re: Re: Batch mode, dzivdzan
    - Re: Re: Batch mode, Narcis Ursache
    - Re: Re: Batch mode, dzivdzan
    - Re: Re: Batch mode, Narcis Ursache
- Re: Re: Batch mode, visualdzivdzan
Abaqus env file, Beilei Hu
- Re: Abaqus env file, Cheng-Kong Wu
  - Re: Abaqus env file, easbeileihu
  - Re: Abaqus env file, Kevin Z. Ding
  - Re: Abaqus env file, Kevin Z. Ding
  - Integration scheme in VUMAT, Kevin Z. Ding
    - Re: Integration scheme in VUMAT, benjamin_hagege
    - Re: Re: Integration scheme in VUMAT, Kevin Z. Ding
- Re: Abaqus env file, Vu Tr Vu
Parametric study, suhoi222
unit of slip rate, Abd. Rahim
Difference BETWEEN ORIENTATION, TRANSFORM AND SYSTEM, aparna tarla
- Re: Difference BETWEEN ORIENTATION, TRANSFORM AND SYSTEM, benjamin_hagege
Ground anchorage modelling, ravindran_manoharan
BenchMark Problem, mothu_k
mass scaling question, amarendraatre
- Re: mass scaling question, mothu_k
  - Re: mass scaling question, benjamin_hagege
    - Re: mass scaling question, amarendraatre
External work, Vu Tr Vu
- Re: External work, benjamin_hagege
- Re: External work, george jefferson
shear stiffness of spring elements, vineetghate
UMAT error code, munir_nazzal
friction coefficient beetween Steel and poyurethane, dang quang Ta
error running input deck generated from Hypermesh, aparna tarla
- Re: error running input deck generated from Hypermesh, Srikanth Borra
parameter distribution in the cross-section, taglit_is
- Re: parameter distribution in the cross-section, acosa_feira
contact between internal surfaces, Robert Henderson
- Re: contact between internal surfaces, george jefferson
- Re: contact between internal surfaces, acosa_feira
- Re: contact between internal surfaces, SONJOY DAS
uel subroutine and error code 5, Aldo Ghisi
- Re: uel subroutine and error code 5, Cheng-Kong Wu
How to use Distributing Coupling?, w_huang71
Re: UMAT linking problem, Kevin Z. Ding
- Re: UMAT linking problem, cathay
  - Re: UMAT linking problem, george jefferson
  - Re: UMAT linking problem, Kevin Z. Ding
- Re: UMAT linking problem, Amir Siddiq
Explicit and standard analysis, Shreyas Nagaraj
- Re: Explicit and standard analysis, acosa_feira
importing from abaqus cae, Denis McCrohan
- Re: importing from abaqus cae, minghui_ub
- Re: importing from abaqus cae, SONJOY DAS
Control Algthm in ABQ/Explicit, mothu_k
- Re: Control Algthm in ABQ/Explicit, benjamin_hagege
- Re: Control Algthm in ABQ/Explicit, Shreyas Nagaraj
Nearly Incompressible Material, Christian Affolter
couple of weird problems, Shiladitya Basu
- Re: couple of weird problems, Dave Lindeman
  - Re: couple of weird problems, Ana Vila Verde
transfer an stl file to IGES(*.igs) or STEP (*.stp) file, lilyma01
- Re: transfer an stl file to IGES(*.igs) or STEP (*.stp) file, KL Lee
  - Re: transfer an stl file to IGES(*.igs) or STEP (*.stp) file, lilyma01
    - Re: Re: transfer an stl file to IGES(*.igs) or STEP (*.stp) file, KL Lee
    - Re: transfer an stl file to IGES(*.igs) or STEP (*.stp) file, lilyma01
    - Re: Re: transfer an stl file to IGES(*.igs) or STEP (*.stp) file, Sam Lee
Frequency extraction, ravindran_manoharan
- Re: Frequency extraction, SONJOY DAS
How to model sand by ABAQUS/CAE?, Chee Heong Tee
- RE: How to model sand by ABAQUS/CAE?, Fernand A. Thomassy
  - Re: How to model sand by ABAQUS/CAE?, See-Chew Soon
    - RE: How to model sand by ABAQUS/CAE?, Fernand A. Thomassy
    - Re: How to model sand by ABAQUS/CAE?, benjamin_hagege
    - Re: How to model sand by ABAQUS/CAE?, spacedude1423
    - RE: Re: How to model sand by ABAQUS/CAE?, Fernand A. Thomassy
    - Re: How to model sand by ABAQUS/CAE?, spacedude1423
    - RE: Re: How to model sand by ABAQUS/CAE?, Fernand A. Thomassy
    - RE: How to model sand by ABAQUS/CAE?, Maziar Mahzari
  - RE: How to model sand by ABAQUS/CAE?, Amir Tabakovic
- RE: How to model sand by ABAQUS/CAE?, visualdzivdzan
  - RE: How to model sand by ABAQUS/CAE?, Chee Heong Tee
Re: motorcycle helmet, mc_ewans1974
HYPERMESH deck, aparna tarla
Importing parts into CAE, Amir Tabakovic
- Re: Importing parts into CAE, KL Lee
  - Re: Importing parts into CAE, Amir Tabakovic
- Re: Importing parts into CAE, acosa_feira
  - Re: Re: Importing parts into CAE, Guoqing Wang
    - RE: Re: Importing parts into CAE, Roger Keene
- Re: Re: Importing parts into CAE, SONJOY DAS
  - Re: Re: Importing parts into CAE, Narcis Ursache
Several steps with static-Riks, Antonio Aguero Ramón Llin
- Several steps with static-Riks, Antonio Aguero Ramón Llin
How to apply force on nodes on a mesh line in CAE, w_huang71
- Re: How to apply force on nodes on a mesh line in CAE, KL Lee
  - Re: How to apply force on nodes on a mesh line in CAE, w_huang71
- Re: How to apply force on nodes on a mesh line in CAE, hubhub
- Re: How to apply force on nodes on a mesh line in CAE, acosa_feira
  - Re: How to apply force on nodes on a mesh line in CAE, w_huang71
Extarpolation of integation point quantities, SONJOY DAS
- Re: Extarpolation of integation point quantities, benjamin_hagege
- RE: Extarpolation of integation point quantities, fuzzyRebuaz
- Re: Extarpolation of integation point quantities, SONJOY DAS
- Re: Extarpolation of integation point quantities, SONJOY DAS
message file, aparna tarla
- Re: message file, Murali Pandi
  - ABAQUS 6.4 on LINUX, Jesus Cuartero
contacting problem after element deletion, John M. Qian
- RE: contacting problem after element deletion, conor mccarthy
Eigenmode, ravindran_manoharan
- Re: Eigenmode, SONJOY DAS
- Eigenmode, ravindran_manoharan
- Re: Eigenmode, SONJOY DAS
  - spring1, Elisa Degiovanni
  - Re: Eigenmode, ravindran_manoharan
    - Re: Re: Eigenmode, Dave Lindeman
    - Re: Eigenmode, ravindran_manoharan
    - Re: Re: Eigenmode, Dave Lindeman
    - Re: Eigenmode, ravindran_manoharan
    - GETVRM-TSHR, jw
- Re: Re: Eigenmode, SONJOY DAS
Filed Output at all frequency in a Steady State Dynamics, SONJOY DAS
RE: how to get going after Getting started with abaqus?? ?, Danadamani, Kiran M.
Elastic-Plastic part of Strain energy density, Amir Siddiq
how to get going after Getting started with abaqus???, aparna tarla
- Re: how to get going after Getting started with abaqus???, benjamin_hagege
  - Re: Re: how to get going after Getting started with abaqus???, aparna tarla
    - Re: Re: how to get going after Getting started with abaqus???, Murali Pandi
    - Re: Re: how to get going after Getting started with abaqus???, Murali Pandi
    - Re: Re: how to get going after Getting started with abaqus???, aparna tarla
    - Re: Re: how to get going after Getting started with abaqus???, Murali Pandi
    - ABAQUS 5.8 key word, Amar A.
    - RE: Re: how to get going after Getting started with abaqus???, Roger Keene
Analytical Rigid Surface, Nathan Flesher
- Re: Analytical Rigid Surface, mothu_k
Remote abaqus display issue., Sachin P. Budhabhatti
- Re: Remote abaqus display issue., george jefferson
  - Re: Remote abaqus display issue., Danny L Levine
  - RE: Remote abaqus display issue., Sachin P. Budhabhatti
    - Re: Remote abaqus display issue., Danny L Levine
    - RE: Remote abaqus display issue., Sachin P. Budhabhatti
    - Re: Remote abaqus display issue., Danny L Levine
    - Re: Remote abaqus display issue., george jefferson
    - Re: Remote abaqus display issue., fernandocachonerin
    - RE: Re: Remote abaqus display issue., Sachin P. Budhabhatti
    - Re: Re: Remote abaqus display issue., Danny L Levine
    - Re: Re: Remote abaqus display issue., Budhabhatti, Sachin P.
    - Re: Re: Remote abaqus display issue., george jefferson
    - Re: Remote abaqus display issue., fernandocachonerin
about element library, mlearning2003
different nodes, Elisa Degiovanni
- Re: different nodes, acosa_feira
Continuum shell elements SC8R & SC6R, Jon Crookston
FW: Re: creep modeling + deformation of the body, Boris
- Re: FW: Re: creep modeling + deformation of the body, Danny L Levine
  - Re: FW: Re: creep modeling + deformation of the body, Boris K
    - Re: FW: Re: creep modeling + deformation of the body, Danny L Levine
defining a part consisting of different regions, Maziar Mahzari
- Re: defining a part consisting of different regions, dzivdzan
- RE: defining a part consisting of different regions, Roger Keene
creep modeling, Boris
- Re: creep modeling, benjamin_hagege
Difference between *BEAM SECTION AND *BEAM GENERAL SECTION, aparna tarla
- Re: Difference between *BEAM SECTION AND *BEAM GENERAL SECTION, benjamin_hagege
- RE: Difference between *BEAM SECTION AND *BEAM GENERAL SECTION, visualdzivdzan
  - abaqus conventions, Elisa Degiovanni
    - Re: abaqus conventions, benjamin_hagege
Crack and gap modelling, ravindran_manoharan
- Re: Crack and gap modelling, acosa_feira
RE: Learning Abaqus from scratch!!, Brown Phillip R (DBQ)
- Re: Learning Abaqus from scratch!!, SONJOY DAS
Explicit Error, amarendraatre
- Learning Abaqus from scratch!!, Aruna Raghavan
  - Re: Learning Abaqus from scratch!!, amarendraatre
    - Re: Re: Learning Abaqus from scratch!!, Aruna Raghavan
- Re: Explicit Error, M. El tobgy
  - Re: Explicit Error, amarendraatre
- Re: Explicit Error, Dave Lindeman
- Re: Explicit Error, mothu_k
  - Re: Explicit Error, amarendraatre
"Reaction" force, linksback
- Re: "Reaction" force, Srikanth Pilla
  - Re: "Reaction" force, linksback
    - Re: Re: "Reaction" force, Ratko Veprek
    - Re: "Reaction" force, linksback
    - Re: Re: "Reaction" force, Ratko Veprek
    - Re: Re: "Reaction" force, george jefferson
    - Re: Re: "Reaction" force, Ratko Veprek
    - Re: "Reaction" force, linksback
- Re: "Reaction" force, zog_the_lizard
Sand Properties, Chee Heong Tee
- RE: Sand Properties, visualdzivdzan
Pressure on Analytic Rigid Surface?, mothu_k
- Re: Pressure on Analytic Rigid Surface?, Danny L Levine
Shell Thickness, mothu_k
- Re: Shell Thickness, Paul Blelloch
  - Re: Shell Thickness, benjamin_hagege
  - spring, Elisa Degiovanni
    - Re: spring, Paul Blelloch
    - R: spring, Elisa Degiovanni
    - Re: R: spring, Paul Blelloch
- Re: Shell Thickness, Dave Lindeman
History output for Load Cases, SONJOY DAS
counting keywords for python script ?!, natasa018
- Re: counting keywords for python script ?!, Paul Blelloch
  - Re: counting keywords for python script ?!, Ratko Veprek
    - Re: counting keywords for python script ?!, dzivdzan
    - Re: counting keywords for python script ?!, Ratko Veprek
    - Re: counting keywords for python script ?!, freeasinbeer1000
    - Re: Re: counting keywords for python script ?!, dzivdzan
- RE: Re: counting keywords for python script ?!, visualdzivdzan
How to pobtain history output of BM and SF ?, SONJOY DAS
units in abaqus, yabaqus
- Re: units in abaqus, Shiladitya Basu
  - Re: units in abaqus, smita
- Re: units in abaqus, Ratko Veprek
  - RE: units in abaqus, Fernand A. Thomassy
    - Re: units in abaqus, benjamin_hagege
- Re: Re: units in abaqus, Fernand A Thomassy
  - Re: Re: units in abaqus, smita
surfaces, Denis McCrohan
- Re: surfaces, Danny L Levine
- Re: surfaces, neal . callaghan
Free Abaqus Biomedical Product Web Seminar, Matt
- Re: Free Abaqus Biomedical Product Web Seminar, Danny L Levine
- Re: Free Abaqus Biomedical Product Web Seminar, Danny L Levine
- Re: Free Abaqus Biomedical Product Web Seminar, yabaqus
cylinderical co-ordinate, Ibrahim iflefel
- Re: cylinderical co-ordinate, benjamin_hagege
Using G77 with ABAQUS, Amir Siddiq
AW: Equivalent nodal force, Amir . Siddiq
Equivalent nodal force, Kim, Yooil
An weird problem in e-value analysis, SONJOY DAS
- Re: An weird problem in e-value analysis, SONJOY DAS
  - Re: An weird problem in e-value analysis, meyh2002
- Re: Re: An weird problem in e-value analysis, SONJOY DAS
'urdfil' problem, Shreyas Nagaraj
- Re: 'urdfil' problem, Dave Lindeman
Pressure On Rigid Surfaces, mothu_k
- Re: Pressure On Rigid Surfaces, M. El tobgy
- Pressure On Rigid Surfaces, mothu_k
  - Re: Pressure On Rigid Surfaces, M. El tobgy
running the analysis directly from *.inp, natasa018
- Re: running the analysis directly from *.inp, Ana Vila Verde
- Re: running the analysis directly from *.inp, Ratko Veprek
Python scripting, spacedude1423
- Re: Python scripting, Ratko Veprek
  - Re: Python scripting, spacedude1423
    - Re: Re: Python scripting, Ratko Veprek
    - Re: Re: Python scripting, Shiladitya Basu
    - Re: Python scripting, spacedude1423
- Re: Python scripting, SONJOY DAS
- Re: Re: Python scripting, dang quang Ta
rigid bodies, Denis McCrohan
- Re: rigid bodies, Timmy Horgan
- Re: rigid bodies, M. El tobgy
  - Re: rigid bodies, Timmy Horgan
    - Re: rigid bodies, M. El tobgy
Re: how to add a tangential shear traction on a surface, burt_shi
- Re: Re: how to add a tangential shear traction on a surface, george jefferson
- Re: how to add a tangential shear traction on a surface, Christian Affolter
Re: convergence problem, nilesh takarkhede
abaqus trouble, Elisa Degiovanni
- Re: abaqus trouble, benjamin_hagege
- Re: abaqus trouble, benjamin_hagege
  - R: Re: abaqus trouble, Elisa Degiovanni
    - Re: Re: abaqus trouble, Dave Lindeman
    - Re: R: Re: abaqus trouble, Shiladitya Basu
Property definition, Denis McCrohan
- Re: Property definition, Timmy Horgan
  - Re: Property definition, Denis McCrohan
  - convergence problem, kedar joshi
    - Re: convergence problem, Ratko Veprek
    - RE: convergence problem, Pedro Moreira
- Re: Property definition, Ratko Veprek
Cylindrical coordinates in Abaqus, linksback
Re: PhD STUDENTS, debasis nayak
Thermal output file question, abaqus_mesh
- Re: Thermal output file question, george jefferson
- RE: Thermal output file question, (fabri) done ugarte
Another DF.EXE Error Query, mothu_k
- RE: Another DF.EXE Error Query, (fabri) done ugarte
How to constrain two points on cylinder?, yabaqus
- Re: How to constrain two points on cylinder?, Antonio Ramon Albert
  - Re: How to constrain two points on cylinder?, min si
Abaqus performance question (hard drives), Gortner, Matt
- Re: Abaqus performance question (hard drives), fernandocachonerin
- RE: Re: Abaqus performance question (hard drives), Gortner, Matt
Re: A Quick question on which fortran compiler to use, spacedude1423
Re: for J integration or stress intense factor, Charles Wong
Re: Your details, musatf
- Re: Re: Your details, Venkatachalam Shanmugam
  - Re: Re: Your details, Danny L Levine
  - Re: Re: Your details, gatogris