mathematics.abaqus.user (thread)

How to choose the suitable element?, apcchoi
- Re: How to choose the suitable element?, Abd. Rahim
- Re: How to choose the suitable element?, amarendraatre
Insufficient resources, jbwinsto
How to get total shear force for a steel section?, shchao100
Importing a displaced model in CAE, Everett Kettle
how to make coincident nodes to model diff. part in CAE, Sam
- Re: how to make coincident nodes to model diff. part in CAE, benjamin_hagege
  - Re: Re: how to make coincident nodes to model diff. part in CAE, napo napo
    - RE: Re: how to make coincident nodes to model diff. part in CAE, Sachin P. Budhabhatti
- Re: how to make coincident nodes to model diff. part in CAE, Greg Brown
  - Re: how to make coincident nodes to model diff. part in CAE, benjamin_hagege
initial strain, Doru Cantemir
- initial strain, Manish Virmani
  - Re: initial strain, Doru Cantemir
    - Re: node set in unsorted form, ra ja
Slabs with openings, cobecsa
Gear Analysis, mao . haojie
- Re: Gear Analysis, kpmonsak
- Re: Gear Analysis, amarendraatre
- Re: Gear Analysis, mao . haojie
subroutine-umat or uhyper, wisonyang
- Re: subroutine-umat or uhyper, dubuprince
- RE: Re: subroutine-umat or uhyper, YANG WEI
parametric study (gather history results), hamdi71
AW: creep analysis using ABAQUS, Brenner, Achim
Smeared crack concrete model stress contours, cobecsa
parametric study, HH
Tresca friction in ABAQUS/CAE?, amcamacho04
creep analysis using ABAQUS, cth1076
Abaqus on a linux other than redhat/suse, Rajil Saraswat
- Re: Abaqus on a linux other than redhat/suse, zogalex
  - Re: Abaqus on a linux other than redhat/suse, Rajil Saraswat
    - Re: Re: Abaqus on a linux other than redhat/suse, Jesus Cuartero
Installing Abaqus on win 2000 or XP, ard2k2003
units modification, Arun
- Re: units modification, benjamin_hagege
  - Re: Re: units modification, Arun Ramasetty
creep analysis -using abaqus, cth1076
- creep analysis -using abaqus, cth1076
UEL vs. ABAQUS ELEMENT: SHOULD WE SEE ANY DIFFERENCE ?, uday komaragiri
Questions about modeling failure during tensile, wlightw
3D fatigue crack growth, msu_fea_guy
- Re: 3D fatigue crack growth, Kim, Yooil
  - Re: 3D fatigue crack growth, msu_fea_guy
    - Re: Re: 3D fatigue crack growth, Kim, Yooil
Fully Couple Heat Transfer - Failure to Converge, clayton_ian
- Re: Fully Couple Heat Transfer - Failure to Converge, amarendraatre
- Fully Couple Heat Transfer - Failure to Converge, clayton_ian
CAE or Input file?, behzad
- Re: ```CAE or Input file?, Dave Lindeman
  - Computation of J-integral, Amir Siddiq
Plastic Strain Increment, AbaqusUser
setting run time files to another directory, Rajil Saraswat
- RE: setting run time files to another directory, Sridharan, V. (Sridharan)
  - Re: setting run time files to another directory, Rajil Saraswat
A PROBLEM in Elastic-Plastic UEL subroutine, uday komaragiri
- Re: A PROBLEM in Elastic-Plastic UEL subroutine, uday komaragiri
Rotation angle of a solid, Cheng-Kong Wu
- Re: Rotation angle of a solid, Abd. Rahim
  - Re: Rotation angle of a solid, Cheng-Kong Wu
RE: abaqus job overwrite, Towse, Adam
UEL subroutine not converging under abq 6.4-3, Javier Segurado
- Re: UEL subroutine not converging under abq 6.4-3, JUAN GOMEZ
  - Re: UEL subroutine not converging under abq 6.4-3, Javier Segurado
questions:keyword or CAE version, behzad
- abaqus job overwrite, Amir Siddiq
  - Re: abaqus job overwrite, janakiramaraju penemitsa
  - Re: abaqus job overwrite, Amit Phatak
VUMAT with ISOTROPIC HARDENING, parry_projects
VUMAT with isotropic hardening -- urgent, parag konde
shell to solid coupling in sandwich plate analysis?, mc_ewans1974
initial strain distribution, Doru Cantemir
Nonlinear transient analysis, Abd. Rahim
- Re: Nonlinear transient analysis, Kyle Indermuehle
- Re: Nonlinear transient analysis, Manish Virmani
  - Re: Re: Nonlinear transient analysis, Abd. Rahim
    - Re: Re: Nonlinear transient analysis, JUAN GOMEZ
- Re: Re: Re: Nonlinear transient analysis, Manish Virmani
  - Re: Re: Re: Re: Nonlinear transient analysis, JUAN GOMEZ
    - Setup Problem with CAE, kpmonsak
  - fixed time step, Abd. Rahim
Output nodal coordinates, Cheng-Kong Wu
- RE: Output nodal coordinates, Sridharan, V. (Sridharan)
  - RE: Output nodal coordinates, Cheng-Kong Wu
- RE: Output nodal coordinates, YANG WEI
- RE: Output nodal coordinates, Sridharan, V. (Sridharan)
  - RE: Output nodal coordinates, Cheng-Kong Wu
    - RE: Output nodal coordinates, Ibrahim iflefel
    - RE: Output nodal coordinates, Cheng-Kong Wu
2D modeling error, kimus6
- Re: 2D modeling error, Danny L Levine
- Re: 2D modeling error, benjamin_hagege
How to make new contour, alallaq
viscoelastic material data, hendersonr2003
AW: how to make new field contour?, Brenner, Achim
New field contour plot, Gautam Wagle
- Re: New field contour plot, Amar A.
Normals's Warning on face with Tie Constraint, Ibrahim Johar
How to chane a rigid body to deformable?, sabbah
Hyperelastic Test Specimen, Amit Phatak
- Re: Hyperelastic Test Specimen, amarendraatre
- RE: Hyperelastic Test Specimen, PAltidis
- RE: Hyperelastic Test Specimen, YANG WEI
Overconstraint warnings, ms_nandhini
- Re: Overconstraint warnings, amarendraatre
- Re: Overconstraint warnings, Vishwanath S
- Re: Overconstraint warnings, benjamin_hagege
- RE: Overconstraint warnings, Sridharan, V. (Sridharan)
  - how to make new field contour?, Amar A.
- Re: Overconstraint warnings, Amir Siddiq
UVAR(n) name in Abq Viewer 6.4, ANACHE Julien
Restart analysis, Ibrahim iflefel
- How to make a new output contour, Amar A.
why I can obtain the J-integral, but cannot get the K value?, nfuwhc
- Obtaining J-Integral, Amir Siddiq
  - Re: Obtaining J-Integral, george jefferson
    - Re: Obtaining J-Integral, Amir Siddiq
    - Re: Obtaining J-Integral, Kim, Yooil
johnson cook constants for aluminium 1100, ashraf iqbal
Re: gap conductance, Vijay Brazanton Dalmet
Optimization without exiting ABAQUS/Standard, chetanpremkumarmalhotra
- Re: Optimization without exiting ABAQUS/Standard, Amit Phatak
- Re: Optimization without exiting ABAQUS/Standard, george jefferson
  - Re: Optimization without exiting ABAQUS/Standard, chetanpremkumarmalhotra
subroutine UEXPAN, Ana Vila Verde
- Re: subroutine UEXPAN, benjamin_hagege
  - Re: Re: subroutine UEXPAN, Ana Vila Verde
Ultimate LOAD, cobecsa
- Re: Ultimate LOAD, Zuhan Xi
V6.4 Linux installation, Jesus Cuartero
Rigid bodies, Denis McCrohan
- Re: Rigid bodies, Vinnakota Subramanyam
  - Re: Rigid bodies, Denis McCrohan
    - Re: Rigid bodies, Vinnakota Subramanyam
    - Re: Rigid bodies, Denis McCrohan
    - Re: Rigid bodies, Vinnakota Subramanyam
    - Re: Rigid bodies, Denis McCrohan
- Rigid bodies, Denis McCrohan
  - analytical rigid body for thermal stress analysis, Xiang Li
    - Re: analytical rigid body for thermal stress analysis, Master Frank aka Frank Richter
meshing issues, amarendraatre
- RE: meshing issues, Sachin P. Budhabhatti
  - Re: meshing issues, amarendraatre
    - RE: Re: meshing issues, Sachin P. Budhabhatti
    - RE: Re: meshing issues, Kamalesh
- comparsion between nastran and abaqus, r . garudadri
  - Re: comparsion between nastran and abaqus, Jesus Cuartero
  - Re: comparsion between nastran and abaqus, Paul Blelloch
Convergence, Vishwanath S
- RE: Convergence, Sachin P. Budhabhatti
- RE: Convergence, Sridharan, V. (Sridharan)
Define 3 structure from CAE, Fernando, Upul
AW: Obtaining data results when the model doen't converg e, Brenner, Achim
continuum shells (SC8) in CAE?, mc_ewans1974
- Re: continuum shells (SC8) in CAE?, Dale Li
Obtaining data results when the model doen't converge, Gonzalez, Diego
- Re: Obtaining data results when the model doen't converge, Amit Phatak
On strain rate control, dubuprince
How to do Linear Buckling Analysis Using an Eigenvalue Solution?, Philip
Linear Buckling Analysis Using an Eigenvalue Solution, Philip D
- Linear Buckling Analysis Using an Eigenvalue Solution, Shahram Ardabili
fluid filled cavity with orifice, Wolfgang Papst
about "hour glass stiffness", meyh2002
How to calculate the section force of plate?, sciencecatman
Access deformed co-ordinates in Sfilm, Rajil Saraswat