mathematics.abaqus.user (thread)

Roger: 2 cpus, Manish Virmani
Re: 2 cpu's (Gareth/Jones), Manish Virmani
- RE: Re: 2 cpu's (Gareth/Jones), Roger Keene
  - RE: Re: 2 cpu's (Gareth/Jones), Nitin
*.fil from CAE, Kannan Subramanian
heat-transfer, naveen patil
Need help..Plz, abaqus_mesh
reading sensitivities ??????...., ronnypai
need help, abaqus_mesh
modeling ductile fracture, tecnoman93
- Re: modeling ductile fracture, Kim, Yooil
  - Re: modeling ductile fracture, barryodonnell2003
reading sensitivities..., ronnypai
how to print contour plot from ABAQUS CAE without the mesh showing, shashank aggarwal
- Re: how to print contour plot from ABAQUS CAE without the mesh showing, elme_gil
  - Re: Re: how to print contour plot from ABAQUS CAE without themesh showing, Danny L Levine
Incorporating Microstructure into ABAQUS, abelvin
- Re: Incorporating Microstructure into ABAQUS, Danny L Levine
  - Energy Release rate, Amir Siddiq
    - Re: Energy Release rate, george jefferson
    - Re: Energy Release rate, pierre_burgers
    - Re: Re: Energy Release rate, uday komaragiri
    - Re: Re: Energy Release rate, Shiladitya Basu
    - RE: Re: Energy Release rate, Pierre Burgers
- Re: Incorporating Microstructure into ABAQUS, Amit
  - Re: Incorporating Microstructure into ABAQUS, barryodonnell2003
Error: PAUSE singular Matrix, Amir . Siddiq
Re: How to write the / access archives, Manish Virmani
Re: can Abaqus run elements with tetracollapse of 0.00, fuzzyRebuaz
Re: How to write the values from the abaqus viewer to a file, george jefferson
WAVE PROPAGATION IN SOLIDS, prashants_iitd
Re: Parameter Identification, chee-kuang kok
How to write the values from the abaqus viewer to a file, babu devendiran
- Re: How to write the values from the abaqus viewer to a file, Master Frank aka Frank Richter
please teach me two things, buywithsell
- Re:please teach me two things, Manish Virmani
- Re:please teach me two things, Gareth Jones
  - RE: Re:please teach me two things, Roger Keene
Defining A Single Crack Tip in Abaqus Standard, Ike Udevi-Aruevoru
debugging code linked to ABAQUS umat, bednarcyk
- Re: debugging code linked to ABAQUS umat, fernandocachonerin
  - Re: debugging code linked to ABAQUS umat, bednarcyk
    - Re: Re: debugging code linked to ABAQUS umat, JUAN GOMEZ
- can Abaqus run elements with tetracollapse of 0.00, Haridas S.P.
  - Re: can Abaqus run elements with tetracollapse of 0.00, Haridas S.P.
transmissibility analysis, Nigel Butler
User subroutine in C++, D'Arconte, Rich
- Re: User subroutine in C++, fernandocachonerin
  - Re: User subroutine in C++, fernandocachonerin
- Re: User subroutine in C++, barryodonnell2003
- Re: User subroutine in C++, Jose Felix Rodriguez
gap conductance, imabilbo
Units used in Abaqus, rob cerra
- Re: Units used in Abaqus, Doru Cantemir
- RE: Units used in Abaqus, Conor Mc Carthy
time increment error in the superplastic forming, babu devendiran
welding, manish pat
- Re: welding, Doru Cantemir
- RE: welding, jlh
  - RE: welding, manish pat
Using contact with analytical surface., Rajil Saraswat
- Help from Nastran Users, Haridas S.P.
  - Re: Help from Nastran Users, Paul Blelloch
  - Re: Help from Nastran Users, Doolyii
  - Re: Help from Nastran Users, Doolyii
- Re: Using contact with analytical surface., Danny L Levine
Need help: Python script in ABAQUS viewer, prukcmu
- Re: Need help: Python script in ABAQUS viewer, Master Frank aka Frank Richter
ABAQUS/CAE, Amir . Siddiq
element numbering control, Doru Cantemir
- RE: element numbering control, Sachin P. Budhabhatti
  - RE: element numbering control, John M. Qian
    - Re: element numbering control, Doru Cantemir
    - RE: element numbering control, Conor Mc Carthy
    - RE: element numbering control, Sachin P. Budhabhatti
    - Re: element numbering control, Doru Cantemir
- RE: element numbering control, Towse, Adam
  - Re: element numbering control, Doru Cantemir
- RE: element numbering control, Towse, Adam
TIE, overconstraint, Contact, chee-kuang kok
- Parameter Identification, Amir Siddiq
  - Re: Parameter Identification, Shiladitya Basu
    - Re: Parameter Identification, Amir Siddiq
    - Re: Parameter Identification, Shiladitya Basu
    - Re: Parameter Identification, Amir Siddiq
    - Re: Parameter Identification, barryodonnell2003
WinXP - disk system tuning - any advice?, jlh
Square ware, Albert Medina
Numerical singularity error in frictional contact interaction, hardik shah
Excessive element distortion, Vijay Almeida
parallel processing in abaqus, melseifi
- Re: parallel processing in abaqus, Danny L Levine
- Re: parallel processing in abaqus, minghui
Reg:Pressure-Time Plot, jayaprasath
- Re: Reg:Pressure-Time Plot, Ibrahim iflefel
Error code 10, JUAN GOMEZ
- Re: Error code 10, Juan I. Arvelo, Jr., Ph.D.
  - Re: Error code 10, JUAN GOMEZ
error compilation subroutine, pedroluisgarlo
- Re: error compilation subroutine, minghui
- Re: error compilation subroutine, uday_kgiri
Re: ADAPTIVE MESH in ABAQUS Standard, Jeffrey Meng Lee Tan
contact problem, xht7942
- Re: contact problem, Master Frank aka Frank Richter
- Re: contact problem, Ibrahim iflefel
- contact problem, wizard_bestin
Definition of the equivalent strain in Abaqus, Philipp Leis
- RE: Definition of the equivalent strain in Abaqus, Fernand A. Thomassy
  - Re: Definition of the equivalent strain in Abaqus, benjamin_hagege
CPU usage in Windows XP, Doru Cantemir
- Re: CPU usage in Windows XP, Paul Blelloch
  - error code 5, Ana Vila Verde
    - Re: error code 5, uday komaragiri
    - Re: error code 5, Ana Vila Verde
    - Re: error code 5, Doru Cantemir
    - Re: error code 5, Ana Vila Verde
    - Re: error code 5, Doru Cantemir
    - Re: error code 5, Ana Vila Verde
    - Re: error code 5, Rebecca Han
    - Re: error code 5, Ana Vila Verde
    - Re: error code 5, Ana Vila Verde
    - Re: error code 5 (questions regarding assembly option), Mahbuba Begum
  - Re: CPU usage in Windows XP, Doru Cantemir
Pipeline Bending with High Strain, gsuus
- Re: Pipeline Bending with High Strain, Kim, Yooil
  - Re: Pipeline Bending with High Strain, gsuus
Explicit error, tecnoman93
error:The solution is diverging in the message file, babu devendiran
- Re: error:The solution is diverging in the message file, Ibrahim iflefel
Restarting an analysis, Albert Medina
- Re: Restarting an analysis, Cheng-Kong Wu
REMESH, asifsoofi
how CPU time related to others?, John M. Qian
Piezoelectric FEM, Juan I. Arvelo, Jr., Ph.D.
- Re: Piezoelectric FEM, Doolyii
  - Re: Re: Piezoelectric FEM, Juan I. Arvelo, Jr., Ph.D.
    - Re: Piezoelectric FEM, Doolyii
    - Re: Re: Piezoelectric FEM, Paul Blelloch
    - Re: Piezoelectric FEM, Doolyii
    - Re: Piezoelectric FEM, Doolyii
    - Re: Re: Piezoelectric FEM, Paul Blelloch
Barbed Fiber Model, sbasspike2000
- Re: Barbed Fiber Model, Doolyii
  - Re: Barbed Fiber Model, sbasspike2000
    - Re: Barbed Fiber Model, Doolyii
    - Re: Barbed Fiber Model, Doolyii
    - Re: Barbed Fiber Model, sbasspike2000
    - Re: Re: Barbed Fiber Model, george jefferson
    - Re: Re: Barbed Fiber Model, george jefferson
    - Re: Barbed Fiber Model, Doolyii
    - Re: Barbed Fiber Model, sbasspike2000
    - Re: Barbed Fiber Model, benjamin_hagege
    - Re: Barbed Fiber Model, Doolyii
    - Re: Barbed Fiber Model, sbasspike2000
    - Re: Barbed Fiber Model, Doolyii
    - using VUMAT in abaqus, abhishek modi
    - Re: Barbed Fiber Model, sbasspike2000
    - Re: Barbed Fiber Model, Doolyii
    - Re: Re: Barbed Fiber Model, george jefferson
    - Re: Barbed Fiber Model, sbasspike2000
(unknown), Vijay Almeida
- (unknown), AbaqusUser
Bus error, naveen patil
Cutting an assembly into half, chetanpremkumarmalhotra
question about MPC and Tie, Xue Li
- Re: question about MPC and Tie, george jefferson
Defining an initially bonded surface surface, ozeleandobob
AW: ABAQUS vs. ANSYS, Brenner, Achim
- Re: ABAQUS vs. ANSYS, Doolyii
  - Re: Re: ABAQUS vs. ANSYS, Dave Lindeman
    - Re: ABAQUS vs. ANSYS, Doolyii
    - Re: Re: ABAQUS vs. ANSYS, Dave Lindeman
    - RE: Re: ABAQUS vs. ANSYS, Fernand A. Thomassy
    - Re: ABAQUS vs. ANSYS, Doolyii
    - Re: Re: ABAQUS vs. ANSYS, Dave Lindeman
    - Re: ABAQUS vs. ANSYS, Doolyii
RE: Fail Stress, Farshad . Mirzadeh
ABAQUS vs. ANSYS, Doru Cantemir
- Re: ABAQUS vs. ANSYS, Dave Lindeman
  - RE: ABAQUS vs. ANSYS, Fernand A. Thomassy
    - Re: ABAQUS vs. ANSYS, Dave Lindeman
    - Re: ABAQUS vs. ANSYS, Doolyii
    - Re: ABAQUS vs. ANSYS, Finite Element Analysis
    - RE: ABAQUS vs. ANSYS, Fernand A. Thomassy
    - Re: ABAQUS vs. ANSYS, Doolyii
    - Re: ABAQUS vs. ANSYS, Finite Element Analysis
    - Re: ABAQUS vs. ANSYS, Doolyii
    - RE: Re: ABAQUS vs. ANSYS, Fernand A. Thomassy
- RE: ABAQUS vs. ANSYS, Farshad . Mirzadeh
  - Re: ABAQUS vs. ANSYS, Doolyii
- RE: ABAQUS vs. ANSYS, Farshad . Mirzadeh
  - Re: ABAQUS vs. ANSYS, barryodonnell2003
- RE: ABAQUS vs. ANSYS, Farshad . Mirzadeh
- Re: ABAQUS vs. ANSYS, Fernand A Thomassy
Coupled thermal-stress analysis with creep????, Praveen kumar
- Re: Coupled thermal-stress analysis with creep????, minghui
Sketcher kills CAE, zogalex
RE: Was: Mesh Compatibility, Lieb, James C.
Difference, Amit Phatak
- Re: Difference, Dave Lindeman
- Re: Difference, Paul Blelloch
error in contact overclosure ...reg, babu devendiran
- Re: error in contact overclosure ...reg, Aditi Saran
- Re: error in contact overclosure ...reg, Ibrahim iflefel
- RE: error in contact overclosure ...reg, Farshad . Mirzadeh
how to find the change in thickness of the deformed shell/membrane element, babu devendiran
- Re: how to find the change in thickness of the deformed shell/membrane element, benjamin_hagege
Newsgroup, Amit Phatak
- Re: Newsgroup, Doolyii
error code 6, ccw700uk
Visual Fortran Compiler, Alberto B.
- Re: Visual Fortran Compiler, fiegepils
  - Re: Visual Fortran Compiler, Dale Li
heat transfer, naveen patil
- Re: heat transfer, Dave Lindeman
MSS/FEA Integrated Analysis ?, Doolyii
- RE: MSS/FEA Integrated Analysis ?, Towse, Adam
  - Re: MSS/FEA Integrated Analysis ?, Doolyii
Re: How to input the material properties?, Doolyii
: hyperelastic material model, Jan Schelstraete
- Re: : hyperelastic material model, Xiang Li
  - Re: : hyperelastic material model, Jan Schelstraete
    - Re: : hyperelastic material model, Dave Lindeman
doubt in the superplastic time increment, babu devendiran
Help required in writing VUMAT urgently, drucker_prager2003
- Re: Help required in writing VUMAT urgently, Dale Li
  - Re: Help required in writing VUMAT urgently, drucker_prager2003
    - Re: Re: Help required in writing VUMAT urgently, bio man
    - Mesh Compatibility, Amir Siddiq
    - RE: Mesh Compatibility, Fernand A. Thomassy
    - Re: Mesh Compatibility, Doolyii
    - RE: Re: Mesh Compatibility, Fernand A. Thomassy
    - Re: Mesh Compatibility, Doolyii
    - Re: Mesh Compatibility, Doolyii
    - Re: Mesh Compatibility, benjamin_hagege
    - RE: Re: Mesh Compatibility, Fernand A. Thomassy
    - RE: Re: Mesh Compatibility, Amir Siddiq
    - RE: Re: Mesh Compatibility, Fernand A. Thomassy
    - Re: Mesh Compatibility, Doolyii
    - Re: Re: Mesh Compatibility, Amir Siddiq
    - Re: Mesh Compatibility, benjamin_hagege
    - Re: Mesh Compatibility, Doolyii
    - RE: Re: Mesh Compatibility, Fernand A. Thomassy
    - Re: Mesh Compatibility, Doolyii
    - RE: Re: Mesh Compatibility, Fernand A. Thomassy
    - Re: Re: Mesh Compatibility, Kim, Yooil
    - Re: Re: Mesh Compatibility, Thomas Zander
    - Re: Re: Mesh Compatibility, Kim, Yooil
    - Re: Mesh Compatibility, Doolyii
    - Re: Re: Mesh Compatibility, Kim, Yooil
    - local orientation system, Damian Kavanagh
    - Re: local orientation system, Ana Vila Verde
    - Re: local orientation system, Damian Kavanagh
    - Re: local orientation system, Ana Vila Verde
    - Re: local orientation system, Shiladitya Basu
    - failure, Damian Kavanagh
    - Re: local orientation system, benjamin_hagege
    - Was: Mesh Compatibility, Thomas Zander
    - Re: Was: Mesh Compatibility, Paul Blelloch
    - Re: Was: Mesh Compatibility, Doolyii
    - Abaqus : Quick reference guide, Haridas S.P.
    - Re: Abaqus : Quick reference guide, Dave Lindeman
    - Re: Abaqus : Quick reference guide, benjamin_hagege
    - Re: Abaqus : Quick reference guide, Sai Avasarala
    - RE: Mesh Compatibility, Roger Keene
How to highlight parts in ABAQUS/CAE 6.4, liang qian
AW: explanation in contour plots?, Brenner, Achim
- visualisation, Damian Kavanagh
  - Re: visualisation, Danny L Levine
    - Re: visualisation, benjamin_hagege
    - brittle cracking, Damian Kavanagh
    - Re: brittle cracking, M. El tobgy
AW: What does this error mean?, Brenner, Achim
explanation in contour plots?, Lei Wei
What does this error mean?, Sachin P. Budhabhatti
Modelling, Denis McCrohan
how to have 2 VUMATs in 1 cae file?, M. Qian
- Re: how to have 2 VUMATs in 1 cae file?, Shiladitya Basu
STABILIZE Question, Cheng-Kong Wu
- Re: STABILIZE Question, Kim, Yooil
- RE: STABILIZE Question, Lieb, James C.
  - Re: STABILIZE Question, Doolyii
- Re: Re: STABILIZE Question, Fernand A Thomassy
  - Re: STABILIZE Question, Doolyii
Mech. modelling of orthotropic wood, kristdah76
- Re: Mech. modelling of orthotropic wood, benjamin_hagege
Error Using Explicit, newbusiness73
Re: input files, Danny L Levine
- Re: input files, hubhub
Re: How can i get a .osp file from Moldflow's simulation?, Antonio Ramon
VUMAT (single precision & double precision numbers), Amir . Siddiq
AW: quick question, Brenner, Achim
quick question, Damian Kavanagh
- Re: quick question, benjamin_hagege
  - Re: Re: quick question, Ibrahim iflefel
- RE: Re: quick question, Farshad . Mirzadeh
  - Re: quick question, Doolyii
Re: Re: Mean Yield Stress, gausson
- Re: Re: Mean Yield Stress, pj mcallen
- RE: Re: Mean Yield Stress, pj mcallen
- Re: Re: Mean Yield Stress, Fernand A Thomassy
  - Re: Re: Mean Yield Stress, gausson
Modified Newton Raphson in ABAQUS ? Any help on what is 'RESIDUAL' ?, uday komaragiri
- Re: Modified Newton Raphson in ABAQUS ? Any help on what is 'RESIDUAL' ?, benjamin_hagege
- Re: Modified Newton Raphson in ABAQUS ? Any help on what is 'RESIDUAL' ?, JUAN GOMEZ
  - Re: Modified Newton Raphson in ABAQUS ? Any help on what is 'RESIDUAL' ? Thanks to Juan and Benjamin, uday komaragiri
RE: Re: old restart files., Shiladitya Basu
how to model fibers embedded in a matrix ?????, uday komaragiri
- Re: how to model fibers embedded in a matrix ?????, Doolyii
  - How to model an array of 1000 fibers in a matrix ????, uday komaragiri
    - Re: How to model an array of 1000 fibers in a matrix ????, Shiladitya Basu
    - RE: How to model an array of 1000 fibers in a matrix ????, Roger Keene
- Re: how to model fibers embedded in a matrix ?????, stout157
  - Re: Re: how to model fibers embedded in a matrix ?????, uday komaragiri
    - Re: Re: how to model fibers embedded in a matrix ?????, Sai Avasarala
    - Re: Re: how to model fibers embedded in a matrix ?????, uday komaragiri
- RE: Re: how to model fibers embedded in a matrix ?????, Farshad . Mirzadeh
  - RE: Re: how to model fibers embedded in a matrix ?????, uday komaragiri
- RE: Re: how to model fibers embedded in a matrix ?????, Farshad . Mirzadeh
  - RE: Re: how to model fibers embedded in a matrix ?????, Amit Phatak