mathematics.abaqus.user (thread)

adaptive meshing, MABROUKI Tarek
Merging coinciding Nodes, Kim, Yooil
- RE: Merging coinciding Nodes, #LEE KIM KHENG#
  - Re: Merging coinciding Nodes, Kim, Yooil
Beam Contact Simulation (tube-to-tube element? ), dzhoucam
Using ABAQUS on Linux, Dr Tim Lucas
- Re: Using ABAQUS on Linux, fernandocachonerin
(unknown), Dr Tim Lucas
cylindrical coords, Miguel Diaz
local CSYS., Quentin
Defining properties in concrete damaged plasticity model, aba qus
Abaqus 6.3-5 on SGI, Sridharan, V.
RE: PUZZLING SITUATION IN ABAQUS 6.3, Farshad . Mirzadeh
Residual Stresses in Contact Problem, Sampath Vanimisetti
non-linear viscoelastic behaviour, hendersonr2003
Anand model in Abaqus?, Zane Johnson
transfer ansys to abaqus, buywithsell
- Re: transfer ansys to abaqus, Dave Lindeman
- Re: transfer ansys to abaqus, kinycheung
one question, buywithsell
Subroutine, (meka) aitziber aizpuru
Orientation for laminate in shell element, tirellimau
- RE: Orientation for laminate in shell element, Farshad . Mirzadeh
SolidWorks Imports to ABAQUS CAE, Ocean Titus
What are the new features in abaqus 6.4 other than 6.3?, Sabbah Ataya
RE: modelling of thin film of material over Si sheet, #LEE KIM KHENG#
Equivalent plastic strain, pjirvine
creep properties for ac layer, Nagarajan
RE: Re: Review of Abaqus v6.4, Everett Kettle
- Re: Review of Abaqus v6.4, lcfw2001
  - Re: Re: Review of Abaqus v6.4, Shiladitya Basu
    - Re: Review of Abaqus v6.4, gt0398b
    - RE: Re: Review of Abaqus v6.4, Sachin P. Budhabhatti
ABAQUS:Database entry not found, Jan Schelstraete
- RE: ABAQUS:Database entry not found, Nandor Mago
ABAQUS v6.4 and Exceed 3D, Jeffrey Meng Lee Tan
- Re: ABAQUS v6.4 and Exceed 3D, Danny L Levine
  - Re: ABAQUS v6.4 and Exceed 3D, Dnyanesh Pawaskar
- RE: ABAQUS v6.4 and Exceed 3D, fuzzyRebuaz
Material models, Mohamed el tobgy
- Re: Material models, Zane Johnson
- Energy balance, Thomas Zander
usermpc subroutine, Sivom Manchiraju
contours, Abaqus User
Modelling ductile damage and texture, abelvin
Composite laminate, tirellimau
Residual Stresses, Sampath Vanimisetti
strain transformations, Christine El-Lahham
- Re: strain transformations, Kim, Yooil
phase transformation stresses, neeraj arora
- Re: phase transformation stresses, Dnyanesh Pawaskar
  - BC's on a curved surface, N. Singh
    - How to apply BC's on a curved surface, uday komaragiri
    - Section Force SF1 or SF2 or SF3 ?????----->Normal Force, nagananda krishna burra
    - Re: Section Force SF1 or SF2 or SF3 ?????----->Normal Force, subramanyam
    - Re: Section Force SF1 or SF2 or SF3 ?????----->Normal Force, Paul Mawhinney
    - modelling of thin film of material over Si sheet, neeraj arora
    - modelling of glass, Damian Kavanagh
    - modelling of glass, Damian Kavanagh
    - Re: modelling of glass, Master Frank aka Frank Richter
    - PUZZLING SITUATION IN ABAQUS 6.3, uday komaragiri
    - Re: PUZZLING SITUATION IN ABAQUS 6.3, Dave Lindeman
connector elements;relative motion displacements, GONZALEZ TORRES, DIEGO
- RE: connector elements;relative motion displacements, fuzzyRebuaz
  - NT11 format on dat file, Yoonchan Oh
Stress control loading, huckbengchew
Installation problem of PC version ABAQUS 6.31, aba qus
- Re: Installation problem of PC version ABAQUS 6.31, Danny L Levine
  - Re: Installation problem of PC version ABAQUS 6.31, Dhananjay Joshi
    - Re: Re: Installation problem of PC version ABAQUS 6.31, Danny L Levine
    - Re: Re: Installation problem of PC version ABAQUS 6.31, aba qus
    - Floating Licence problems, pj mcallen
    - Review of Abaqus v6.4, Sachin P. Budhabhatti
    - Re: Review of Abaqus v6.4, Shiladitya Basu
    - Re: Review of Abaqus v6.4, lcfw2001
    - Re: Review of Abaqus v6.4, Kim, Yooil
    - Re: Installation problem of PC version ABAQUS 6.31, fernandocachonerin
- Re: Installation problem of PC version ABAQUS 6.31, saharan mani ram
- RE: Re: Installation problem of PC version ABAQUS 6.31, Oscar Gonzalo
  - Re: Installation problem solved of PC version ABAQUS 6.31, aba qus
How to suppress the STT file, aba qus
- Re: How to suppress the STT file, Ilia Hariton
  - Re: How to suppress the STT file, aba qus
    - Re: How to suppress the STT file, janakiramaraju penemitsa
    - Re: How to suppress the STT file, aba qus
    - Re: How to suppress the STT file, Ilia Hariton
    - Re: How to suppress the STT file, Shiladitya Basu
Fortran compiler, Quentin
Contact, John heng
- CONTACT, John heng
input deck for concrete damage plasticity, saharan_mr
- RE: input deck for concrete damage plasticity, Nandor Mago
importing input deck into cae., amirhon
- RE: importing input deck into cae., Oscar Gonzalo
Hypermesh and Abaqus, Liang, Shaomin
- RE: Hypermesh and Abaqus, fuzzyRebuaz
instruction check, pc12_70
New Yahoo! Group: MEMS Modeling & Simulation, Dnyanesh Pawaskar
- contact pressure in contact modeling, sandeep kibey
  - Re: contact pressure in contact modeling, barryodonnell2003
    - Re: Re: contact pressure in contact modeling, sandeep kibey
help needed, troxbox
- RE: help needed, Sachin P. Budhabhatti
How can I read the (Node file)?, Sabbah Ataya
- Re: How can I read the (Node file)?, barryodonnell2003
AW: how to limit the motion of nodes, Brenner, Achim
how to limit the motion of nodes, jinyingjun2002
- Re: how to limit the motion of nodes, Rebecca Han
Reaction Force for axisymmetric elements, huckbengchew
- RE: Reaction Force for axisymmetric elements, Lieb, James C.
"characteristic contact surface length" reported in .dat file, jlh
Re: Viewing results from multiple files., darshan . pawargi
temp format in *.dat file (Help~~~~~), Yoonchan Oh
Animating multiple ODB files, Dnyanesh Pawaskar
- Re: Animating multiple ODB files, fernandocachonerin
  - Viewing results from multiple files., Sachin P. Budhabhatti
    - Re: Viewing results from multiple files., fernandocachonerin
    - RE: Re: Viewing results from multiple files., Simon Graindorge
    - RE: Re: Viewing results from multiple files., Sachin P. Budhabhatti
    - RE: Re: Viewing results from multiple files., darshan . pawargi
Problem with connectors, Dimitri Debruyne
- RE: Problem with connectors, fuzzyRebuaz
modeling water, kim hyunki
I am puzzled by the Coordinate systems, jinyingjun2002
Axisymmetric Solution, huckbengchew
Best way to optimize, Sachin P. Budhabhatti
- Re: Best way to optimize, Dnyanesh Pawaskar
  - RE: Best way to optimize, Sachin P. Budhabhatti
AW: Re: multiple jobs, Brenner, Achim
- Re: AW: Re: multiple jobs, pj mcallen
user element-solution diverging, gte534j
Material properties, Mohamed el tobgy
- Re: Material properties, Danny L Levine
  - Re: Material properties, M. El tobgy
    - Re: Material properties, Danny L Levine
    - Re: Material properties, Danny L Levine
    - rigid indenter, Damian Kavanagh
    - brittle materials, Damian Kavanagh
    - Re: brittle materials, barryodonnell2003
    - Modelling Ductile Damage, pj mcallen
    - Re: Modelling Ductile Damage, Damian Kavanagh
    - Re: Modelling Ductile Damage, pj mcallen
    - Re: Modelling Ductile Damage, barryodonnell2003
    - Re: Re: Modelling Ductile Damage, pj mcallen
    - Re: Modelling Ductile Damage, Leo
MODELLING BRITTLE FAILURE OF CERAMIC, Sahshi Kumar
- Re: MODELLING BRITTLE FAILURE OF CERAMIC, saharan mani ram
- RE: MODELLING BRITTLE FAILURE OF CERAMIC, Nandor Mago
large strain in VUMAT, Ramón Zaera Polo
- large strain in VUMAT, Ramón Zaera Polo
  - Re: large strain in VUMAT, barryodonnell2003
    - large strain in VUMAT, Ramón Zaera Polo
How to define the initial condition in Abaqus CAE, tie hu
- Re: How to define the initial condition in Abaqus CAE, saharan mani ram
  - Re: How to define the initial condition in Abaqus CAE, tie hu
<no subject>, Holger=20D=F6rnhoff
- RE: <no subject>, Towse, Adam
  - RE: <no subject>, pj mcallen
- RE: <no subject>, Towse, Adam
  - Re: multiple jobs, barryodonnell2003
    - Re: Re: multiple jobs, pj mcallen
Axisymmetric Spherical void in spherical shell, huckbengchew
stainless plastic properties, lamont02022000
- RE: stainless plastic properties, Fernand A. Thomassy
Area,Volume calculation, Mohamed el tobgy
*Plastic keyword, surenbob
- Re: *Plastic keyword, Danny L Levine
- Re: *Plastic keyword, pj mcallen
- RE: *Plastic keyword, Alberto Etxeberria
  - RE: *Plastic keyword, Fernand A. Thomassy
Call incremental stress, Stefan Jung
- modelling of 3D de-bonding, Soheil Manouchehri
  - Re: modelling of 3D de-bonding, parag konde
- how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, 姝苏
  - Re: how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, John Lightner
    - a more question about running the subroutine?, 姝苏
  - Re: how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, barryodonnell2003
  - Re: how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, Dale Li
    - Re: how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, 姝苏
    - Re: how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, Dave Lindeman
    - another question to run the subroutine?, 姝苏
    - Re: another question to run the subroutine?, Dale Li
    - Mesh-Module, Nitin Singh
    - RE: Mesh-Module, Sachin P. Budhabhatti
    - RE: Mesh-Module, Nitin Singh
    - RE: Mesh-Module, Shiladitya Basu
    - RE: Mesh-Module, Sachin P. Budhabhatti
    - RE: Mesh-Module, Simon Graindorge
    - RE: Mesh-Module, saharan mani ram
    - RE: Mesh-Module, Nitin Singh
Deleting annotations and arrows in CAE 6-3-1?, Burget, Jocelyn (UK)
- Re: Deleting annotations and arrows in CAE 6-3-1?, Danny L Levine
BC problems at thermal stress analysis, sunguci2003
- Re: BC problems at thermal stress analysis, Gareth Jones
  - RE: BC problems at thermal stress analysis, sungbo
- RE: BC problems at thermal stress analysis, Gareth Jones
  - RE: BC problems at thermal stress analysis, sungbo
    - Re: BC problems at thermal stress analysis, Ana Vila Verde
Shear localization for segmented chip in machining, Dhananjay Joshi
- Re: Shear localization for segmented chip in machining, nta369
  - Re: Shear localization for segmented chip in machining, Dhananjay Joshi
    - Re: Re: Shear localization for segmented chip in machining, Dave Lindeman
error with implicit dynamic analysis, bishenko
- Re: error with implicit dynamic analysis, Dhananjay Joshi
  - Re: error with implicit dynamic analysis, bishenko
blankholder force, lamont02022000
- RE: blankholder force, Farshad . Mirzadeh
Re: Contact Problem with Analytical Rigid Surface, Dailey, Dan
- Re: Re: Contact Problem with Analytical Rigid Surface, Jaw Woei Jaw Woei
- von Mises Stress, K.K.Lee
- Re: - von Mises Stress, M. Qian
RE: How to apply force in CAE, Steve Blue
Re: How to execute ABAQUS using multiple User Subroutines., skittysren
- RE: Re: How to execute ABAQUS using multiple User Subroutines., Gil-Negrete, Nere
Help: how to connect the subroutine file to the *.inp files, 姝苏
- Re: Help: how to connect the subroutine file to the *.inp files, Ana Vila Verde