mathematics.abaqus.user (date)

mathematics.abaqus.user (date)

November 29, 2003

adaptive meshing, MABROUKI Tarek

November 28, 2003

Re: Using ABAQUS on Linux, fernandocachonerin
Re: Merging coinciding Nodes, Kim, Yooil
RE: Merging coinciding Nodes, #LEE KIM KHENG#
Merging coinciding Nodes, Kim, Yooil

November 27, 2003

Beam Contact Simulation (tube-to-tube element? ), dzhoucam
Using ABAQUS on Linux, Dr Tim Lucas
(unknown), Dr Tim Lucas
Floating Licence problems, pj mcallen

November 26, 2003

cylindrical coords, Miguel Diaz
local CSYS., Quentin
Re: transfer ansys to abaqus, kinycheung
RE: Re: Review of Abaqus v6.4, Sachin P. Budhabhatti

November 25, 2003

Defining properties in concrete damaged plasticity model, aba qus
Abaqus 6.3-5 on SGI, Sridharan, V.
RE: PUZZLING SITUATION IN ABAQUS 6.3, Farshad . Mirzadeh
Re: PUZZLING SITUATION IN ABAQUS 6.3, Dave Lindeman
RE: Orientation for laminate in shell element, Farshad . Mirzadeh
PUZZLING SITUATION IN ABAQUS 6.3, uday komaragiri
Residual Stresses in Contact Problem, Sampath Vanimisetti
Re: modelling of glass, Master Frank aka Frank Richter
non-linear viscoelastic behaviour, hendersonr2003
Anand model in Abaqus?, Zane Johnson

November 24, 2003

Re: transfer ansys to abaqus, Dave Lindeman
transfer ansys to abaqus, buywithsell
one question, buywithsell
Re: Installation problem solved of PC version ABAQUS 6.31, aba qus
Subroutine, (meka) aitziber aizpuru
Orientation for laminate in shell element, tirellimau
SolidWorks Imports to ABAQUS CAE, Ocean Titus
What are the new features in abaqus 6.4 other than 6.3?, Sabbah Ataya
modelling of glass, Damian Kavanagh
modelling of glass, Damian Kavanagh
Re: Section Force SF1 or SF2 or SF3 ?????----->Normal Force, Paul Mawhinney
RE: ABAQUS:Database entry not found, Nandor Mago
Re: Section Force SF1 or SF2 or SF3 ?????----->Normal Force, subramanyam
RE: modelling of thin film of material over Si sheet, #LEE KIM KHENG#

November 22, 2003

modelling of thin film of material over Si sheet, neeraj arora
Section Force SF1 or SF2 or SF3 ?????----->Normal Force, nagananda krishna burra
Equivalent plastic strain, pjirvine

November 21, 2003

creep properties for ac layer, Nagarajan
Re: Review of Abaqus v6.4, gt0398b
Re: Review of Abaqus v6.4, lcfw2001
How to apply BC's on a curved surface, uday komaragiri
Re: Re: Review of Abaqus v6.4, Shiladitya Basu
Re: ABAQUS v6.4 and Exceed 3D, Dnyanesh Pawaskar
RE: Re: Review of Abaqus v6.4, Everett Kettle
Re: Review of Abaqus v6.4, lcfw2001
Re: ABAQUS v6.4 and Exceed 3D, Danny L Levine
Energy balance, Thomas Zander
RE: ABAQUS v6.4 and Exceed 3D, fuzzyRebuaz
ABAQUS:Database entry not found, Jan Schelstraete
ABAQUS v6.4 and Exceed 3D, Jeffrey Meng Lee Tan

November 20, 2003

Re: Material models, Zane Johnson
Material models, Mohamed el tobgy
usermpc subroutine, Sivom Manchiraju
BC's on a curved surface, N. Singh
contours, Abaqus User
Modelling ductile damage and texture, abelvin
Re: Installation problem of PC version ABAQUS 6.31, fernandocachonerin
RE: Re: Installation problem of PC version ABAQUS 6.31, Oscar Gonzalo

November 19, 2003

Re: Review of Abaqus v6.4, Kim, Yooil
Composite laminate, tirellimau
Re: Review of Abaqus v6.4, Shiladitya Basu
Review of Abaqus v6.4, Sachin P. Budhabhatti
Re: Re: Installation problem of PC version ABAQUS 6.31, aba qus
Re: Re: Installation problem of PC version ABAQUS 6.31, Danny L Levine
Re: Installation problem of PC version ABAQUS 6.31, Dhananjay Joshi
Residual Stresses, Sampath Vanimisetti

November 18, 2003

Re: Re: Modelling Ductile Damage, pj mcallen

November 17, 2003

Re: strain transformations, Kim, Yooil
strain transformations, Christine El-Lahham
Re: how to limit the motion of nodes, Rebecca Han
Re: How to suppress the STT file, aba qus
Re: phase transformation stresses, Dnyanesh Pawaskar
Re: How to suppress the STT file, Shiladitya Basu
phase transformation stresses, neeraj arora
Re: How to suppress the STT file, Ilia Hariton
Re: How to suppress the STT file, janakiramaraju penemitsa

November 16, 2003

Re: How to suppress the STT file, aba qus
NT11 format on dat file, Yoonchan Oh
RE: connector elements;relative motion displacements, fuzzyRebuaz
connector elements;relative motion displacements, GONZALEZ TORRES, DIEGO
Re: Installation problem of PC version ABAQUS 6.31, saharan mani ram
Re: How to suppress the STT file, Ilia Hariton

November 15, 2003

RE: Mesh-Module, Nitin Singh
Re: Modelling Ductile Damage, barryodonnell2003
CONTACT, John heng
Stress control loading, huckbengchew

November 14, 2003

Re: Installation problem of PC version ABAQUS 6.31, Danny L Levine
Installation problem of PC version ABAQUS 6.31, aba qus
How to suppress the STT file, aba qus
Re: Modelling Ductile Damage, pj mcallen
Fortran compiler, Quentin
Re: Modelling Ductile Damage, Leo
Re: Modelling Ductile Damage, Damian Kavanagh
Modelling Ductile Damage, pj mcallen
RE: Hypermesh and Abaqus, fuzzyRebuaz
Contact, John heng

November 13, 2003

Re: Re: contact pressure in contact modeling, sandeep kibey
RE: input deck for concrete damage plasticity, Nandor Mago
RE: Mesh-Module, saharan mani ram
input deck for concrete damage plasticity, saharan_mr
RE: importing input deck into cae., Oscar Gonzalo
importing input deck into cae., amirhon
Re: brittle materials, barryodonnell2003
Re: contact pressure in contact modeling, barryodonnell2003
Re: How can I read the (Node file)?, barryodonnell2003
RE: Mesh-Module, Simon Graindorge
Hypermesh and Abaqus, Liang, Shaomin
instruction check, pc12_70
contact pressure in contact modeling, sandeep kibey
New Yahoo! Group: MEMS Modeling & Simulation, Dnyanesh Pawaskar

November 12, 2003

RE: help needed, Sachin P. Budhabhatti
RE: Mesh-Module, Sachin P. Budhabhatti
help needed, troxbox
RE: Mesh-Module, Shiladitya Basu
RE: Mesh-Module, Nitin Singh
RE: Reaction Force for axisymmetric elements, Lieb, James C.
How can I read the (Node file)?, Sabbah Ataya
AW: how to limit the motion of nodes, Brenner, Achim
RE: Re: Viewing results from multiple files., darshan . pawargi
how to limit the motion of nodes, jinyingjun2002
Reaction Force for axisymmetric elements, huckbengchew

November 11, 2003

"characteristic contact surface length" reported in .dat file, jlh
RE: Mesh-Module, Sachin P. Budhabhatti
RE: Best way to optimize, Sachin P. Budhabhatti
RE: Re: Viewing results from multiple files., Sachin P. Budhabhatti
Mesh-Module, Nitin Singh
RE: Re: Viewing results from multiple files., Simon Graindorge
Re: another question to run the subroutine?, Dale Li
Re: Viewing results from multiple files., fernandocachonerin
Re: Viewing results from multiple files., darshan . pawargi

November 10, 2003

temp format in *.dat file (Help~~~~~), Yoonchan Oh
Viewing results from multiple files., Sachin P. Budhabhatti
brittle materials, Damian Kavanagh
rigid indenter, Damian Kavanagh
Re: Animating multiple ODB files, fernandocachonerin
Animating multiple ODB files, Dnyanesh Pawaskar

November 09, 2003

RE: Problem with connectors, fuzzyRebuaz

November 08, 2003

Problem with connectors, Dimitri Debruyne
modeling water, kim hyunki
I am puzzled by the Coordinate systems, jinyingjun2002
Axisymmetric Solution, huckbengchew

November 07, 2003

another question to run the subroutine?, 姝苏
Re: AW: Re: multiple jobs, pj mcallen
large strain in VUMAT, Ramón Zaera Polo
a more question about running the subroutine?, 姝苏
Re: Best way to optimize, Dnyanesh Pawaskar
Best way to optimize, Sachin P. Budhabhatti
Re: BC problems at thermal stress analysis, Ana Vila Verde
AW: Re: multiple jobs, Brenner, Achim
RE: BC problems at thermal stress analysis, sungbo
Re: Re: multiple jobs, pj mcallen
user element-solution diverging, gte534j
Re: modelling of 3D de-bonding, parag konde

November 06, 2003

Re: how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, Dave Lindeman
RE: MODELLING BRITTLE FAILURE OF CERAMIC, Nandor Mago
Re: how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, 姝苏
Re: Material properties, Danny L Levine
Re: Material properties, Danny L Levine
Re: MODELLING BRITTLE FAILURE OF CERAMIC, saharan mani ram
Re: Material properties, M. El tobgy
Re: How to define the initial condition in Abaqus CAE, tie hu
Re: Material properties, Danny L Levine
Re: Deleting annotations and arrows in CAE 6-3-1?, Danny L Levine
Material properties, Mohamed el tobgy
Re: how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, Dale Li
Re: how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, barryodonnell2003
Re: large strain in VUMAT, barryodonnell2003
Re: multiple jobs, barryodonnell2003
Re: how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, John Lightner
MODELLING BRITTLE FAILURE OF CERAMIC, Sahshi Kumar
how can I find the file "'ABA_PARAM.INC'' to run the subroutine?, 姝苏

November 05, 2003

Re: How to define the initial condition in Abaqus CAE, saharan mani ram
large strain in VUMAT, Ramón Zaera Polo
large strain in VUMAT, Ramón Zaera Polo
Re: - von Mises Stress, M. Qian
Re: Re: Shear localization for segmented chip in machining, Dave Lindeman
RE: stainless plastic properties, Fernand A. Thomassy
RE: <no subject>, Towse, Adam
RE: <no subject>, pj mcallen
How to define the initial condition in Abaqus CAE, tie hu
RE: <no subject>, Towse, Adam
<no subject>, Holger=20D=F6rnhoff
Axisymmetric Spherical void in spherical shell, huckbengchew
RE: BC problems at thermal stress analysis, Gareth Jones
Re: Shear localization for segmented chip in machining, Dhananjay Joshi
RE: BC problems at thermal stress analysis, sungbo
stainless plastic properties, lamont02022000
Re: Shear localization for segmented chip in machining, nta369

November 04, 2003

RE: *Plastic keyword, Fernand A. Thomassy
RE: *Plastic keyword, Alberto Etxeberria
Re: *Plastic keyword, pj mcallen
Re: *Plastic keyword, Danny L Levine
Re: error with implicit dynamic analysis, bishenko
Area,Volume calculation, Mohamed el tobgy
*Plastic keyword, surenbob
modelling of 3D de-bonding, Soheil Manouchehri
Call incremental stress, Stefan Jung
Deleting annotations and arrows in CAE 6-3-1?, Burget, Jocelyn (UK)
Re: BC problems at thermal stress analysis, Gareth Jones
BC problems at thermal stress analysis, sunguci2003
Re: error with implicit dynamic analysis, Dhananjay Joshi
Re: Re: Contact Problem with Analytical Rigid Surface, Jaw Woei Jaw Woei
Shear localization for segmented chip in machining, Dhananjay Joshi

November 03, 2003

RE: blankholder force, Farshad . Mirzadeh
error with implicit dynamic analysis, bishenko
blankholder force, lamont02022000
Re: Contact Problem with Analytical Rigid Surface, Dailey, Dan
RE: Re: How to execute ABAQUS using multiple User Subroutines., Gil-Negrete, Nere
- von Mises Stress, K.K.Lee

November 01, 2003

Re: Help: how to connect the subroutine file to the *.inp files, Ana Vila Verde
RE: How to apply force in CAE, Steve Blue
Re: How to execute ABAQUS using multiple User Subroutines., skittysren
Help: how to connect the subroutine file to the *.inp files, 姝苏

News | FAQ | advertise