mathematics.abaqus.user (thread)

Crack Propagation, Amir . Siddiq
- Re: Crack Propagation, john yan
calculating and viewing strain rate, Timmy Horgan
Regarding *MPC, dingjuncrack
(unknown), DJUN
USDFLD problems, stryan222
orientation error, aan941
AW: Abaqus post-processing issue / ANSWER AND NEW QUES TION, Brenner, Achim
- Re: Abaqus post-processing issue / ANSWER AND NEW QUESTION, Dnyanesh Pawaskar
establishing equilibrium, saharan_mr
Fracture analysis, Bill Hugh
Abaqus post-rpocessing issue, barryodonnell2003
- Re: Abaqus post-rpocessing issue, Steve Manifold
  - Re: Abaqus post-rpocessing issue, Timmy Horgan
    - Composite laminate survey, Jesus Cuartero
3D solid elements, Talat A. Amra
Combined Hardening Model, Kim, Yooil
Explosion analysis, Roshan Kotian
- RE: Explosion analysis, #LEE KIM KHENG#
concrete cracks, Talat A. Amra
- Re: concrete cracks, zjchen
- RE: concrete cracks, Nandor Mago
beam and pipe elements contact, almsta3jil
- How we can obtain a rotational degree of freedom according a local system, wissal mesfar
- Re: beam and pipe elements contact, yunxiao wang
  - Re: beam and pipe elements contact, alawar
- Re: beam and pipe elements contact, yunxiao wang
FD curve..., s kantharaju
- RE: FD curve..., Nandor Mago
Interpenetration of Two Surfaces --ABAQUS Standard, Jeffrey Meng Lee Tan
Renumbering nodes in ABAQUS/CAE, Amir . Siddiq
contact penetration, Sivom Manchiraju
Interpenetration of Two Surfaces, Jeffrey Meng Lee Tan
Shell midsurface location in ABAQUS EXPLICIT and STANDARD for analysis with contact, Utpal Borah
- Re: Shell midsurface location in ABAQUS EXPLICIT and STANDARD for analysis with contact, Doolyii
Re: Give me a hand with BS5950 Grade 43 plastic property!, macauor
viscoelastic, JINGFENG JIANG
- Re: viscoelastic, Timmy Horgan
constraint coundary condition, dubuprince
- Re: constraint coundary condition, Sampath Vanimisetti
- Re: Re: constraint coundary condition, Ilango
  - Re: Re: constraint coundary condition, Sampath Vanimisetti
worm forces, R.SENTHILKUMAR
CPE4/CPE4R?, john yan
- Re: CPE4/CPE4R?, gausson
  - Re: CPE4/CPE4R?, john yan
    - Re: CPE4/CPE4R?, gausson
How to Discretize a load to nodal forces?, melseifi
- RE: How to Discretize a load to nodal forces?, george f rosala
Help regarding the *FIELD option, binuo
defining creep, navin t
Debugging sub routines...PLZ hlp, Steve Blue
- Re: Debugging sub routines...PLZ hlp, Sivom Manchiraju
  - Re: Debugging sub routines...PLZ hlp, S P Damodaran
  - Re: Debugging sub routines...PLZ hlp, Steve Blue
- Re: Debugging sub routines...PLZ hlp, quentin morel
how to depress stt file output, lweizhou
Creep, Everett Kettle
- Re: Creep, Armando Alsina
* Orientation for Lamina definition., Doolyii
- Re: * Orientation for Lamina definition., MUKUL SHUKLA
How to define a non-uniform pressure load?, bishenko
- Re: How to define a non-uniform pressure load?, quentin morel
  - Re: How to define a non-uniform pressure load?, bishenko
How to execute ABAQUS using multiple User Subroutines., wangrichard2002
- Re: How to execute ABAQUS using multiple User Subroutines., dubuprince
- Re: How to execute ABAQUS using multiple User Subroutines., kinycheung
  - Re: How to execute ABAQUS using multiple User Subroutines., lweizhou
- Re: Re: How to execute ABAQUS using multiple User Subroutines., kinycheung
  - Re: How to execute ABAQUS using multiple User Subroutines., lweizhou
Change ABAQUS Working Directory, Jeffrey Meng Lee Tan
- Re: Change ABAQUS Working Directory, fernandocachonerin
- RE: Change ABAQUS Working Directory, hakantu
Fwd: EXTREMELY URGENT, Peter Connolly
the thermal stress, nfuwhc
- RE: the thermal stress, Fernand A. Thomassy
  - Re: the thermal stress, nfuwhc
    - RE: Re: the thermal stress, Fernand A. Thomassy
[Fwd: EXTREMELY URGENT], Finite Element Analysis
- Re: [Fwd: EXTREMELY URGENT], Shiladitya Basu
- Re: [Fwd: EXTREMELY URGENT], Finite Element Analysis
  - Shell Elements and, Rap Tor
    - Re: Shell Elements and, Steve Manifold
    - Torque - Theta relationship, Sachin P. Budhabhatti
Truss Elements, Sanjay Chaudhury
ABAQUS, Schwantes, Stan
AW: Abaqus cae and Exceed 7.1, Amir . Siddiq
Abaqus cae and Exceed 7.1, Ibrahim iflefel
Convergence problem, yunxiao wang
- Re: Convergence problem, umb31
- Re: Re: Convergence problem, yunxiao wang
  - Re: Re: Convergence problem, S P Damodaran
Local CS, #LEE KIM KHENG#
SURFACE defination, SANJEEV PATIL
- Re: SURFACE defination, Abhijeet Joshi
  - Re: SURFACE defination, SANJEEV PATIL
  - contact defnition in soild mesh, SANJEEV PATIL
    - Re: contact defnition in soild mesh, Abhijeet Joshi
ABAQUS CAE, Ibrahim iflefel
- Re: ABAQUS CAE, alok dhagat
  - Re: ABAQUS CAE, hubhub
- Re: ABAQUS CAE, Sampath Vanimisetti
  - Re: ABAQUS CAE, lweizhou
- RE: ABAQUS CAE, Moe Heidi
electrostatic analysis in abaqus, Naveen Kishore Karri
results field and history, sanjeevgouda
- Re: results field and history, Timmy Horgan
  - Re: results field and history, SANJEEV PATIL
solid-solid conatct-temp displacement-friction, ujjawal sisodia
eigenvalues + buckling + imperfections, mc_ewans1974
- Re: eigenvalues + buckling + imperfections, Shiladitya Basu
  - Re: eigenvalues + buckling + imperfections, mc_ewans1974
    - Re: Re: eigenvalues + buckling + imperfections, Shiladitya Basu
    - Re: eigenvalues + buckling + imperfections, mc_ewans1974
- Re: eigenvalues + buckling + imperfections, S P Damodaran
- RE: eigenvalues + buckling + imperfections, Farshad . Mirzadeh
about introduction of damping when UMAT applied, Yuande Zhou
fixation of displacement without restricting Poisson's ratio, aan941
- Re: fixation of displacement without restricting Poisson's ratio, Jon Crookston
  - warning and error message, wissal mesfar
  - Re: fixation of displacement without restricting Poisson's ratio, sunnweii
    - Re: fixation of displacement without restricting Poisson's ratio, Jon Crookston
Re: Re: damage propagation modeling, pj mcallen
Error Message: Node "0", Ismaila Aliyu
- RE: Error Message: Node "0", Fernand A. Thomassy
  - RE: Error Message: Node "0", Ismaila Aliyu
    - RE: Error Message: Node "0", Fernand A. Thomassy
- Re: Error Message: Node "0", Doolyii
A web portal about Finite Elements and Simulation, www_6dof_com
Question regarding Debonding, parag konde
node limits, Ovunc Mutlu
- RE: node limits, Farshad . Mirzadeh
IRS elements in V6.3 of Abaqus, Ravikumar Patil
Cross-section forces and moments, moor_ch_ch
- RE: Cross-section forces and moments, fuzzyRebuaz
  - Re: Cross-section forces and moments, moor_ch_ch
    - ABAQUS to NASTRAN, Jesus Cuartero
    - Re: ABAQUS to NASTRAN, Doolyii
    - RE: ABAQUS to NASTRAN, Remi Duquette
    - Re: ABAQUS to NASTRAN, Doolyii
    - Re: Cross-section forces and moments, Doolyii
- RE: Cross-section forces and moments, fuzzyRebuaz
Re: Crash Analysis, ujjawal sisodia
Win XP and exceed6.2, em98043
- Re: Win XP and exceed6.2, Ana Vila Verde
- Re: Win XP and exceed6.2, quentin morel
- Re: Win XP and exceed6.2, fernandocachonerin
- Re: Win XP and exceed6.2, Yuri Ilyin
- RE: Re: Win XP and exceed6.2, Nivrutti_Garud
*TRANSFORM (similar to Gary's problem), Soheil Manouchehri
- Re: *TRANSFORM (similar to Gary's problem), Timmy Horgan
- RE: *TRANSFORM (similar to Gary's problem), Farshad . Mirzadeh
*TRANSFORM, gary_yang_saic
- RE: *TRANSFORM, Nivrutti_Garud
Crash Analysis, Vijay Kumar R,Bangalore
- RE: Crash Analysis, Subramanyam_Vinnakota
ABAQUS input file, Amir . Siddiq
- Re: ABAQUS input file, saharan mani ram
abaqus recover command, Timmy Horgan
- RE: abaqus recover command, Sachin P. Budhabhatti
  - Re: abaqus recover command, Timmy Horgan
Re: 3-D Analysis with ABAQUS Explicit, dubuprince
***ERROR: SYSTEM ERROR IN NTFILE-LOOP 60 EXCEEDED, a . alsina
Re: Symmetric Modell, camelia dujko
- Re: Re: Symmetric Modell, Dr. Puneet Mahajan
- RE: Re: Symmetric Modell, Farshad . Mirzadeh
  - Re: Symmetric Modell, Doolyii