mathematics.abaqus.user (thread)

Concrete brittle cracking model, saharan mani ram
input data for concrete damaged plasticity, saharan mani ram
applying displacement on a body, Nedim=20=D6zcan
- Re: applying displacement on a body, Master Frank aka Frank Richter
"recover" a stopped run, pingsmail
Anybody can tell how to do this ?, john yan
- Re: Anybody can tell how to do this ?, Kong-Ping Wong
Any ABAQUS user in CT area ?, Doolyii
Contact convergence, Vijay Kumar R,Bangalore
- Re: Contact convergence, rajesh chandra
- RE: Contact convergence, Vijay Kumar R,Bangalore
Random vibration using abaqus, qlisun88
about the input file, wukuanyang
- Re: about the input file, alok dhagat
  - Re: about the input file, wukuanyang
    - Re: Re: about the input file, Brendan
    - Re: Re: about the input file, alok dhagat
    - Re: about the input file, wukuanyang
use of subroutines, Damian Kavanagh
- Re: use of subroutines, BIRAB BIRAB
  - Analysis type ??????, nagananda krishna burra
    - Re: Analysis type ??????, s kantharaju
can ABAQUS/Explicit be used to simulate Hyperelastic material failure ?, john yan
coupling of thermal & structural with flow field, triciadrexler
- Re: coupling of thermal & structural with flow field, Dave Lindeman
Subroutine DISP, Geralf Pineda Hernández
- Subroutine DISP, Geralf Pineda Hernández
need some help in dynamic loading, NAGARAJAN RAMALINGAM
- Re: need some help in dynamic loading, Doolyii
Self contact, asifsoofi
- Re: Self contact, Kong-Ping Wong
  - Re: Self contact, Muhammad Soofi
    - Re: Self contact, Kong-Ping Wong
    - Re: Self contact, Brahim Nadri
    - Re: Self contact, Muhammad Soofi
    - Re: Self contact, Muhammad Soofi
stress concentration factor., Shiladitya Basu
- Re: stress concentration factor., Doolyii
Curved Crack in ABAQUS, Sampath Vanimisetti
Modelling rotating shafts for whirl, robertmgreene
- Re: Modelling rotating shafts for whirl, Steve Manifold
  - RE: Modelling rotating shafts for whirl, David Gray
    - Re: Modelling rotating shafts for whirl, Steve Manifold
- Re: Modelling rotating shafts for whirl, Doolyii
AW: Question on contact simulation, Amir . Siddiq
Question on contact simulation, jeyakumar subbaroyan
- Re: Question on contact simulation, Danny L Levine
Regarding using TIE command in abaqus Fracture mechanics, kiran
error code 11, Sivom Manchiraju
- Re: error code 11, Jon Crookston
  - Re: Re: error code 11, Shiladitya Basu
[General] cpu usage and time increment, wlw50531
Re: SpotWeld, wlw50531
AW: fixed format - free format, Brenner, Achim
- Re: AW: fixed format - free format, Shiladitya Basu
fixed format - free format, Geralf Pineda Hernández
- Re: fixed format - free format, Ana Vila Verde
- Re: fixed format - free format, Ana Vila Verde
- Re: fixed format - free format, S P Damodaran
AW: Thermal BC in CAE, Lijing, Xie
Thermal BC in CAE, srk_dce
- Re: Thermal BC in CAE, Kong-Ping Wong
Brittle Cracking Material Model, saharan_mr
transverse shear stress, Sivom Manchiraju
nobody can answer me about creep, cthivillon
- Re: nobody can answer me about creep, barryodonnell2003
fixing an element then continuing an analysis, Timmy Horgan
- RE: fixing an element then continuing an analysis, Sachin P. Budhabhatti
  - Re: fixing an element then continuing an analysis, Timmy Horgan
shell to solid connections for abaqus, Das
Re: Increasing Temperature??????????????, Stefan Sanft
Tie option question...., leeatanlw
- Re: Tie option question...., DavidV
anybody can make this file run ?, john yan
- Re: anybody can make this file run ?, Timmy Horgan
NEED HELP on ABAQUS-Expl., quasistatic hyperelasticity + VUMAT, y34conmio
ABAQUS-Explicit + User Defined Material-Subroutine VUMAT, y34conmio
Itenium Processor, Finite Element Analysis
- Itenium Processor, Finite Element Analysis
output in cylindrical coordinate system, dan
smaller .odb file, pingsmail
- RE: smaller .odb file, Benedikt Moser
- indentation in graded material, Benedikt Moser
  - Re: indentation in graded material, Timmy Horgan
    - RE: indentation in graded material, Benedikt Moser
    - Re: indentation in graded material, Timmy Horgan
    - Adaptive meshing ?, Sachin P. Budhabhatti
  - Re: indentation in graded material, barryodonnell2003
    - error code 10?, Benedikt Moser
Parameters for Mixed/Combined Hardening in ABAQUS, Jeffrey Meng Lee Tan
- Re: Parameters for Mixed/Combined Hardening in ABAQUS, Master Frank aka Frank Richter
Help, Brahim Nadri
LsDyna Yahoo group., Mr_Zhang
- Re: LsDyna Yahoo group., Doolyii
Print nodes, Geralf Pineda Hernández
Thermal-stress analysis in CAE, srk_dce
- Re: Thermal-stress analysis in CAE, Kong-Ping Wong
- Re: Thermal-stress analysis in CAE, saharan mani ram
- Thermal-stress analysis in CAE, Rolando Guzman
  - Re: Thermal-stress analysis in CAE, Ana Vila Verde
creep, christèle thivillon
Axisymmetric modelling, Albert Medina
- Re: Axisymmetric modelling, Gareth Jones
  - Re: Axisymmetric modelling, Albert Medina
post processing with ABAQUS CAE, saharan_mr
crack tip, Xue Li
- Re: crack tip, kiran
- Re: crack tip, Xue Li
setting control parameters, minghuil2003
new user need help, wukuanyang
- Re: new user need help, Ana Vila Verde
Principal directions, Damian Kavanagh
- Re: Principal directions, Ana Vila Verde
- Re: Principal directions, Sampath Vanimisetti
- Re: Principal directions, Kong-Ping Wong
another Q on crack propagation debugging, thanks, john yan
- problem, nagananda krishna burra
  - Increasing Temperature??????????????, nagananda krishna burra
help on crack propagation debugging, john yan
RE: Fortran or Python?, Lieb, James C.
- Re: Fortran or Python?, Doru Cantemir
Fortran or Phyton?, Doru Cantemir
- Re: Fortran or Phyton?, Sampath Vanimisetti
Pressure Load History, Lanre Bolarinwa
display strain rate in Explicit, pingsmail
changing spring stiffness, Sivom Manchiraju
- Re: changing spring stiffness, Doolyii
Postprocessing, fabio car
- Re: Postprocessing, Nitin Singh
- Re: Postprocessing, Sampath Vanimisetti
RE: 1QSU chain, Nivrutti_Garud
Help for ABAQUS/Viewer, Sampath Vanimisetti
initial conditions problem..., Jonathan Lang
- Re: initial conditions problem..., Master Frank aka Frank Richter
- RE: initial conditions problem..., Subramanyam_Vinnakota
  - RE: initial conditions problem..., Jonathan Lang
variable COORDS in subroutine DFLUX, Ana Vila Verde
- Re: variable COORDS in subroutine DFLUX, Dave Lindeman
how to use COMMAND in CAE?, john yan
- Re: how to use COMMAND in CAE?, Mike hechter
  - Re: how to use COMMAND in CAE?, john yan
- Re: how to use COMMAND in CAE?, john yan
Any TrueGrid Users?, Sachin P. Budhabhatti
- Re: Any TrueGrid Users?, BINU OOMMEN
  - RE: Any TrueGrid Users?, Sachin P. Budhabhatti
    - RE: Any TrueGrid Users?, BINU OOMMEN
Re: error code 1073741787, bennani
importing iges files, John Collen
- RE: importing iges files, Sachin P. Budhabhatti
- Re: importing iges files, Dave Lindeman
  - importing iges files, alok dhagat
- RE: importing iges files, #LEE KIM KHENG#
Drucker Praeger model output variable, dan
reinforced concrete column, d9rajesh
- Re: reinforced concrete column, VIKRAM DHRUVA
tensile failure, benimoser
- Re: tensile failure, Doolyii
  - RE: Re: tensile failure, Benedikt Moser
    - Re: tensile failure, Doolyii
- Re: tensile failure, Sampath Vanimisetti
  - Re: Re: tensile failure, john yan
RE: optimization problem, fuzzyRebuaz
compression-tension element, melseifi
- Re: compression-tension element, Doolyii
Concrete, Narasimhan Swaminathan
- RE: Concrete, Sachin P. Budhabhatti
  - RE: Concrete, VIKRAM DHRUVA
    - RE: Concrete, Sachin P. Budhabhatti
    - Re: Concrete, S P Damodaran
- Re: Concrete, Haiyong Wu
- RE: Concrete, Narasimhan Swaminathan
- RE: Concrete, Haiyong Wu
ABAQUS theory, self99
- Re: ABAQUS theory, Doolyii
- RE: ABAQUS theory, Lieb, James C.
  - IGES file Import along with partitioning, alok dhagat
Re: TIED option, Lanre Bolarinwa
- Re: TIED option, Doolyii
  - Re: TIED option, Lanre Bolarinwa
    - Re: TIED option, Doolyii
    - Re: TIED option, Doolyii
    - Re: TIED option, Lanre Bolarinwa
Elements Distortion Errors -- Results Reliability -- CAE, Jeffrey Meng Lee Tan
how to do with this warning about contact?, macauor
how to model the two plate contact together?, haitao zhu
- Re: how to model the two plate contact together?, Sachin P. Budhabhatti
- Re: how to model the two plate contact together?, JH
  - Re: how to model the two plate contact together?, samer_tawfik
About multiple point constraint, yinlz
- Re: About multiple point constraint, yinlz
Axisymmetric solid element, Geralf Pineda Hernández
- RE: Axisymmetric solid element, Fernand A. Thomassy
- Re: Axisymmetric solid element, JH
3D Micromechanical Modeling and Memory Limitation, Leo
- Re: 3D Micromechanical Modeling and Memory Limitation, Doolyii
  - Re: Re: 3D Micromechanical Modeling and Memory Limitation, Leo
querying in CAE, srk_dce
- Re: querying in CAE, Ana Vila Verde
- RE: querying in CAE, Fernand A. Thomassy
  - This may sound stupid..but (Re: querying in CAE), JH
Quality check - Jacobi, Bronch Plemenitas
off-loading zones, s_goutianos
RE: Cooling rate, Liu, Yang AED
- UMAT+USDFLD, Shiladitya Basu
A little question, Alberto B.
- Re: A little question, Shiladitya Basu
  - Re: create field output, Nitin Singh
Rigid surface, Sophie HU
sistem information for ABAQUS 6.4, Doru Cantemir
- Re: sistem information for ABAQUS 6.4, Jaw Woei Jaw Woei
  - Cooling rate, liang qian
- Re: sistem information for ABAQUS 6.4, barryodonnell2003
Riks Method, abaquser
- Re: Riks Method, Shiladitya Basu
Plane stress orthotropic failure measures, Timmy Horgan
- Re: Plane stress orthotropic failure measures, Jaw Woei Jaw Woei
  - Re: Plane stress orthotropic failure measures, Shiladitya Basu
    - Re: Plane stress orthotropic failure measures, Timmy Horgan
    - Re: Plane stress orthotropic failure measures, Shiladitya Basu
- Re: Plane stress orthotropic failure measures, JH
S4, S4R and S4R5, Sophie HU
- Re: S4, S4R and S4R5, JH
  - RE: Re: S4, S4R and S4R5, Fernand A. Thomassy
    - Indeed...(Re: S4, S4R and S4R5), JH
    - average and standard deviation, Hui Shen
    - Re: average and standard deviation, barryodonnell2003
    - Re: Indeed...(Re: S4, S4R and S4R5), Sophie HU
Rotation Loading, Junghyun Ahn
- RE: Rotation Loading, Fernand A. Thomassy
  - Re: Rotation Loading, JH
    - RE: Re: Rotation Loading, Fernand A. Thomassy
area in *cfilm, sp . damodaran
Re: ABAQUS@xxxxxxxxxxxxxxx, Master Frank aka Frank Richter
- uc3m-madrid, Rolando Guzman
  - RE: uc3m-madrid, Fernand A. Thomassy
*Plasticity or *Deformation plasticity, Burget, Jocelyn
- Re: *Plasticity or *Deformation plasticity, Philipp Leis
- Re: *Plasticity or *Deformation plasticity, Junghyun Ahn
- Re: Phase from GUI, alok dhagat
- Re: *Plasticity or *Deformation plasticity, Junghyun Ahn
  - Re: Re: *Plasticity or *Deformation plasticity, gausson
- RE: *Plasticity or *Deformation plasticity, Towse, Adam
viscoelastic analysis in ABAQUS, melseifi
Why the crack does not propagate?, john yan
- Re: Why the crack does not propagate?, Junghyun Ahn
Re: tension when using 'no separation' contact, Junghyun Ahn
Re: A question about CAE, Taiho KIM