Subject: Re: Genius Slim 321C isn't recognized at
all on.... - msg#00031

List: macosx.macam.devel

Mail Archive Navigation:
by Date: Prev Next Date Index by Thread: Prev Next Thread Index

Sorry, sent the below email yesterday, but incomplete. New to Mac and didn't
know how to get at this before. Checking your Sourceforge forums I found how to
get it and have included it here to supplement the other info. I am also
willing to help if I can on testing or other as you see fit. Just let me know.

Thanks again.

Alfred DeRose

| | | +-o WebCAM USB2.0@fd600000 <class IOUSBDevice, registered, match$
| | | | {
| | | | "PortNum" = 6
| | | | "IOUserClientClass" = "IOUSBDeviceUserClient"
| | | | "Device Speed" = 2
| | | | "iSerialNumber" = 0
| | | | "Bus Power Available" = 250
| | | | "IOGeneralInterest" = "IOCommand is not serializable"
| | | | "bDeviceClass" = 0
| | | | "USB Product Name" = "WebCAM USB2.0"
| | | | "bNumConfigurations" = 1
| | | | "iManufacturer" = 0
| | | | "IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"$
| | | | "bcdDevice" = 258
| | | | "bDeviceSubClass" = 0
| | | | "iProduct" = 1
| | | | "sessionID" = 11146691661
| | | | "bMaxPacketSize0" = 64
| | | | "locationID" = 18446744073665511424
| | | | "idProduct" = 28704
| | | | "USB Address" = 2
| | | | "bDeviceProtocol" = 0
| | | | "idVendor" = 1112
| | | | }

> ------------ Původní zpráva ------------
> Od: Alfred DeRose <Alfred.DeRose@xxxxxxxxx>
> Předmět: Genius Slim 321C isn't recognized at all on....
> Datum: 27.7.2006 00:44:45
> ----------------------------------------
> a Mac Mini with the following specs:
>
> 1.66 GHz Intel Core Duo
> 1 GB DDR2 SDRAM
> Mac OSX 10.4.7
>
>
> Camera Specs:
>
> Genius Slim 321C
> Link:
>
> http://www.geniusnet.com.tw:80/geniusOnline/online.portal?_nfpb=true&productPortlet_actionOverride=%2Fportlets%2FproductArea%2Fcategory%2FqueryPro&_windowLabel=productPortlet&productPortletproductId=30925&_pageLabel=productPage
> Version: 1.02
> Bus Power (mA): 500
> Speed: Up to 480 Mb/sec
> Product ID: 0x7020
> Vendor ID: 0x0458
>
>
> Macam version:
>
> 0.8.7, 2006-06-23
>
> Thanks for the hard work so far. Hope this helps you (and me by extension) in
> getting this cam to run.
>
> Alfred DeRose
>
>
>

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Thread at a glance:

Previous Message by Date:

Macam + Logitech Quickcam Messenger

Hi, I've just tried Macam 0.87 on my OSX and Logitech Quickcam Messenger. The camera works pretty well. The problem was sound. after googling around, I got it to work using the AppleUSBAudio.kext. So now mic works using the system prefs. The problem is that they only work individually, i.e. I can't use both camera AND mic at the same time... i believe it's because once a usb driver(either macam or appleusbaudio) takes over for the device, the other can't do anything. maybe i'm missing something here, but any advice is appreciated. Thanks! -david ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Next Message by Date:

Genius Slim 321C isn't recognized at all on....

a Mac Mini with the following specs: 1.66 GHz Intel Core Duo 1 GB DDR2 SDRAM Mac OSX 10.4.7 Camera Specs: Genius Slim 321C Link: http://www.geniusnet.com.tw:80/geniusOnline/online.portal?_nfpb=true&productPortlet_actionOverride=%2Fportlets%2FproductArea%2Fcategory%2FqueryPro&_windowLabel=productPortlet&productPortletproductId=30925&_pageLabel=productPage Version: 1.02 Bus Power (mA): 500 Speed: Up to 480 Mb/sec Product ID: 0x7020 Vendor ID: 0x0458 Macam version: 0.8.7, 2006-06-23 Thanks for the hard work so far. Hope this helps you (and me by extension) in getting this cam to run. Alfred DeRose ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Previous Message by Thread:

Next Message by Thread:

Logitech Quickcam Express

Yesterday I purchased a Logitech Quickcam Express but it doesn't work with macam 0.87. It's the new model with the monito clip.System profiler says so:Camera: Versione: 0.00 Potenza bus (mA): 500 Velocità: Fino a 12 Mb/sec Produttore: ID prodotto: 0x092f ID fornitore: 0x046dThe last two items are Product ID and Producer ID. Everything under OsX 10.4.7 on a G4.Thanks for the great job! -- Emanuele Guicciardi---------------E: eguicciardi@xxxxxxxxx eguicciardi@xxxxxxxSKYPE: eguicciardiAIM: eguicciardi MSN: sirguich@xxxxxxxxxxxWEB: http://www.sirguich.net----------------Never ask a man what sort of computer he drives. If it's a Mac, he'll tell you. If not, why embarrass him? -- Tom Clancy ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV_______________________________________________ webcam-osx-devs mailing list webcam-osx-devs@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/webcam-osx-devs

Subject: Re: Genius Slim 321C isn't recognized atall on.... - msg#00031