Re: syslinux command line?

Thomas,
   The following syntax should do what you want

  linux text ks=nfs:192.168.1.1:/path/to/ks.cfg ip=192.168.1.2
   dns=192.168.1.1 netmask=255.255.255.0 gateway=192.168.1.254
   ksdevice=eth0

  Good luck,
    Brian

Cameron, Thomas wrote:
> Hi all -
>
> We use Proliant servers with iLO boards.  Instead of setting up PXE or DHCP, or 
> creating a new diskette image with a ks.cfg for each server, is there a way to 
> set the ip address, netmask and gateway from the command line when syslinux 
> comes up?
>
> I am using:
>
> linux text ks=nfs:192.168.1.1:/path/to/ks.cfg
>
> Can you do something like this:
>
> linux text 
> ks=nfs:192.168.1.1:/path/to/ks.cfg,eth0=192.168.1.2,netmask=255.255.255.0,gateway=192.168.1.254
>
> Thanks!
> --
> Thomas Cameron, RHCE, CNE, MCSE, MCT
> Consultant
> Linux Design and Engineering
> Bank of America
> (972) 997-9641
>
> The opinions expressed in this message are mine alone and do not necessarily reflect the opinions of my employer, Bank of America. 
>
>
> _______________________________________________
> Kickstart-list mailing list
> Kickstart-list@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/kickstart-list