Re: Re: CD printing to R300

   From: James Cort <jim@xxxxxxxxxxxxxxxx>
   Date: Sat, 31 Jul 2004 09:15:38 +0000

   On Saturday 31 July 2004 01:15, Robert L Krawitz wrote:
   > Done, although I used 16 mm rather than 15 mm just to be on the safe
   > side.  It's a separate option.
   >
   > Perhaps we should add microadjustments; as I recall, Epson recommends
   > it.

   Indeed, Epson's software offers a fair bit of flexibility in this
   area - you can alter the size of the centre hole to whatever you
   like, and move the whole image around by about 5 millimetres in
   each direction.

What is the range of adjustment allowed for the center hole?  In
Gimp-Print the basic unit of measure is the point (1/72"), so that
would be about +/- 14 points.

-- 
Robert Krawitz                                     <rlk@xxxxxxxxxxxx>

Tall Clubs International  --  http://www.tall.org/ or 1-888-IM-TALL-2
Member of the League for Programming Freedom -- mail lpf@xxxxxxxxxxxx
Project lead for Gimp Print   --    http://gimp-print.sourceforge.net

"Linux doesn't dictate how I work, I dictate how Linux works."
--Eric Crampton


-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com