Subject: Re: macbook 2,1 touchpad and suspending - msg#00039

Previous Message by Date: click to view message preview

messed up gpt. Advice/dump?

Sorry if this looks odd - sent from a phone. I just messed up my gpt, by fiddling with parted and fdisk. Now efi disk shows up in MacOSX and Grub does not find the Linux partition. rEFIt sees everything, but the EFI shell is broken. Could anyone dump their full (working) gpt and mbr tables for me? Advice on fixing would be greatly appreciated too. Thanks and advance / Jonas ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php

Next Message by Date: click to view message preview

applesmc options

Is it possible to pass this module options? Since the motion sensor is not working properly and causes the applesmc module to hang upon boot, I thought I would disable the motion sensor for now. Thank you, SB -- If you sow your wild oats, hope for a crop failure. signature.asc Description: Digital signature ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php_______________________________________________ Mactel-linux-users mailing list Mactel-linux-users@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/mactel-linux-users

Previous Message by Thread: click to view message preview

Re: macbook 2,1 touchpad and suspending

On Thu, Jun 19, 2008 at 8:31 PM, k11stan <k11stan@xxxxxxxxx> wrote: > hey every1 - i'm having a hell of a time getting the touchpad to work > on a white 2,1 macbook ( the cursor does move but only up and down and > the button moves it to the right only) ... i tried all kinds of xorg > config opts but to no avail .. on top of that xorg complains that > there was no synaptics hardware found ... anyhow - here's the xorg log > (at least the important part) and xorg.conf ... all of this is on a > 2.6.25 kernel with patches ... : > > (II) Synaptics touchpad driver version 0.14.6 (1406) > Synaptics Touchpad no synaptics event device found (checked 21 nodes) > > .. and here is the xorg.conf for the touchpad (worx fine on my macbook pro > 3,1) > > Section "ServerLayout" > Identifier "X.org Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Keyboard0" "CoreKeyboard" > InputDevice "Synaptics Touchpad" > InputDevice "Mouse0" "CorePointer" > EndSection > > Section "Module" > > Load "synaptics" > Load "record" > Load "dbe" > Load "extmod" > Load "dri" > Load "xtrap" > Load "GLcore" > Load "glx" > Load "freetype" > Load "type1" > EndSection > > Section "InputDevice" > Identifier "Synaptics Touchpad" > Driver "synaptics" > Option "Device" > "/dev/input/by-id/usb-Apple_Computer_Apple_Internal_Keyb > oard_._Trackpad-mouse" > #i also tried other /dev entries like input/mouseX and /dev/psaux .. none > worked > Option "Protocol" "auto-dev" > Option "LeftEdge" "100" > Option "RightEdge" "1100" > Option "TopEdge" "50" > Option "BottomEdge" "300" > Option "FingerLow" "20" > Option "FingerHigh" "30" > Option "MaxTapTime" "150" > Option "MaxTapMove" "90" > Option "MaxDoubleTapTime" "180" > Option "VertScrollDelta" "25" > Option "HorizScrollDelta" "30" > Option "VertTwoFingerScroll" "true" > Option "HorizTwoFingerScroll" "true" > Option "FastTaps" "true" > Option "TapButton2" "3" > Option "TapButton3" "2" > Option "MinSpeed" "0.5" > Option "MaxSpeed" "3.5" > Option "AccelFactor" "0.35" > EndSection > > the other issue is hibernation - tends to hang about 25% of the time > .. any suggestions (heres my lsmod...)? > > Module Size Used by > rfcomm 19728 1 > hidp 7680 4 > l2cap 12800 18 rfcomm,hidp > hci_usb 7580 4 > i915 19456 2 > drm 43544 3 i915 > psmouse 13320 0 > snd_seq_oss 17664 0 > snd_seq_midi_event 3200 1 snd_seq_oss > snd_seq 26608 4 snd_seq_oss,snd_seq_midi_event > snd_seq_device 3340 2 snd_seq_oss,snd_seq > snd_pcm_oss 25504 0 > snd_mixer_oss 9088 1 snd_pcm_oss > af_packet 9856 0 > acpi_cpufreq 4876 1 > applesmc 12592 0 > hwmon 1180 1 applesmc > input_polldev 1416 1 applesmc > led_class 1412 1 applesmc > appletouch 6148 0 > usbmouse 2432 0 > usbhid 16640 0 > wlan_scan_sta 8064 0 > ath_rate_sample 8960 1 > snd_hda_intel 243732 5 > snd_pcm 38276 3 snd_pcm_oss,snd_hda_intel > snd_timer 10760 3 snd_seq,snd_pcm > snd 24356 16 > snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer > snd_page_alloc 4232 2 snd_hda_intel,snd_pcm > ath_pci 172344 0 > wlan 148336 4 wlan_scan_sta,ath_rate_sample,ath_pci > ath_hal 229088 3 ath_rate_sample,ath_pci > ehci_hcd 21388 0 > uhci_hcd 13964 0 > usbcore 76016 7 > hci_usb,appletouch,usbmouse,usbhid,ehci_hcd,uhci_hcd > mousedev 6920 1 > sg 20276 0 > evdev 5120 3 > > > > > > thanx for any help > > stan > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Mactel-linux-users mailing list > Mactel-linux-users@xxxxxxxxxxxxxxxxxxxxx > https://lists.sourceforge.net/lists/listinfo/mactel-linux-users > Hello; try this one and see if it works, I was having problems as well with appletouch with xorg 7.3 -- Justin P. Mattock xorg.conf Description: Binary data ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php_______________________________________________ Mactel-linux-users mailing list Mactel-linux-users@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/mactel-linux-users

Next Message by Thread: click to view message preview

Re: macbook 2,1 touchpad and suspending

On Fri, Jun 20, 2008 at 9:11 PM, k11stan <k11stan@xxxxxxxxx> wrote: > hmm crap .. this seems to be a 2.6.25 issue - i just emerged X on a > macbook pro 2,1 (as opposed to the regular macbook before) and no > synaptics hardware was detected either ... i tried the config u gave > me but no-go ... any suggestions ? has anyone else reported success > with all devs on this kernel ... ? > > thanx for any help ... sorry for being a pain in the ass > > stan > > On Thu, Jun 19, 2008 at 4:05 PM, Justin Mattock <justinmattock@xxxxxxxxx> > wrote: >> On Thu, Jun 19, 2008 at 8:31 PM, k11stan <k11stan@xxxxxxxxx> wrote: >>> hey every1 - i'm having a hell of a time getting the touchpad to work >>> on a white 2,1 macbook ( the cursor does move but only up and down and >>> the button moves it to the right only) ... i tried all kinds of xorg >>> config opts but to no avail .. on top of that xorg complains that >>> there was no synaptics hardware found ... anyhow - here's the xorg log >>> (at least the important part) and xorg.conf ... all of this is on a >>> 2.6.25 kernel with patches ... : >>> >>> (II) Synaptics touchpad driver version 0.14.6 (1406) >>> Synaptics Touchpad no synaptics event device found (checked 21 nodes) >>> >>> .. and here is the xorg.conf for the touchpad (worx fine on my macbook pro >>> 3,1) >>> >>> Section "ServerLayout" >>> Identifier "X.org Configured" >>> Screen 0 "Screen0" 0 0 >>> InputDevice "Keyboard0" "CoreKeyboard" >>> InputDevice "Synaptics Touchpad" >>> InputDevice "Mouse0" "CorePointer" >>> EndSection >>> >>> Section "Module" >>> >>> Load "synaptics" >>> Load "record" >>> Load "dbe" >>> Load "extmod" >>> Load "dri" >>> Load "xtrap" >>> Load "GLcore" >>> Load "glx" >>> Load "freetype" >>> Load "type1" >>> EndSection >>> >>> Section "InputDevice" >>> Identifier "Synaptics Touchpad" >>> Driver "synaptics" >>> Option "Device" >>> "/dev/input/by-id/usb-Apple_Computer_Apple_Internal_Keyb >>> oard_._Trackpad-mouse" >>> #i also tried other /dev entries like input/mouseX and /dev/psaux .. none >>> worked >>> Option "Protocol" "auto-dev" >>> Option "LeftEdge" "100" >>> Option "RightEdge" "1100" >>> Option "TopEdge" "50" >>> Option "BottomEdge" "300" >>> Option "FingerLow" "20" >>> Option "FingerHigh" "30" >>> Option "MaxTapTime" "150" >>> Option "MaxTapMove" "90" >>> Option "MaxDoubleTapTime" "180" >>> Option "VertScrollDelta" "25" >>> Option "HorizScrollDelta" "30" >>> Option "VertTwoFingerScroll" "true" >>> Option "HorizTwoFingerScroll" "true" >>> Option "FastTaps" "true" >>> Option "TapButton2" "3" >>> Option "TapButton3" "2" >>> Option "MinSpeed" "0.5" >>> Option "MaxSpeed" "3.5" >>> Option "AccelFactor" "0.35" >>> EndSection >>> >>> the other issue is hibernation - tends to hang about 25% of the time >>> .. any suggestions (heres my lsmod...)? >>> >>> Module Size Used by >>> rfcomm 19728 1 >>> hidp 7680 4 >>> l2cap 12800 18 rfcomm,hidp >>> hci_usb 7580 4 >>> i915 19456 2 >>> drm 43544 3 i915 >>> psmouse 13320 0 >>> snd_seq_oss 17664 0 >>> snd_seq_midi_event 3200 1 snd_seq_oss >>> snd_seq 26608 4 snd_seq_oss,snd_seq_midi_event >>> snd_seq_device 3340 2 snd_seq_oss,snd_seq >>> snd_pcm_oss 25504 0 >>> snd_mixer_oss 9088 1 snd_pcm_oss >>> af_packet 9856 0 >>> acpi_cpufreq 4876 1 >>> applesmc 12592 0 >>> hwmon 1180 1 applesmc >>> input_polldev 1416 1 applesmc >>> led_class 1412 1 applesmc >>> appletouch 6148 0 >>> usbmouse 2432 0 >>> usbhid 16640 0 >>> wlan_scan_sta 8064 0 >>> ath_rate_sample 8960 1 >>> snd_hda_intel 243732 5 >>> snd_pcm 38276 3 snd_pcm_oss,snd_hda_intel >>> snd_timer 10760 3 snd_seq,snd_pcm >>> snd 24356 16 >>> snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer >>> snd_page_alloc 4232 2 snd_hda_intel,snd_pcm >>> ath_pci 172344 0 >>> wlan 148336 4 wlan_scan_sta,ath_rate_sample,ath_pci >>> ath_hal 229088 3 ath_rate_sample,ath_pci >>> ehci_hcd 21388 0 >>> uhci_hcd 13964 0 >>> usbcore 76016 7 >>> hci_usb,appletouch,usbmouse,usbhid,ehci_hcd,uhci_hcd >>> mousedev 6920 1 >>> sg 20276 0 >>> evdev 5120 3 >>> >>> >>> >>> >>> >>> thanx for any help >>> >>> stan >>> >>> ------------------------------------------------------------------------- >>> Check out the new SourceForge.net Marketplace. >>> It's the best place to buy or sell services for >>> just about anything Open Source. >>> http://sourceforge.net/services/buy/index.php >>> _______________________________________________ >>> Mactel-linux-users mailing list >>> Mactel-linux-users@xxxxxxxxxxxxxxxxxxxxx >>> https://lists.sourceforge.net/lists/listinfo/mactel-linux-users >>> >> >> Hello; try this one and see if it works, I was having problems as well >> with appletouch with >> xorg 7.3 >> >> -- >> Justin P. Mattock >> > Hmm, that's tough to say, sucks that didn't work. From my experience with 2.6.25 it was working for me, without any of the mactel patches, I just needed to adjust my xorg.conf to what you see now. Maybe there is something with the order of modules i.g. appletouch first in /etc/modules then usbhid and so forth. regards; -- Justin P. Mattock ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php