Re: v0.8.4-rc3 - wifi problem which doesn't exist underkernel 2.6.15-hh0

Hi Joshua,

I have done what you have suggested below and also tried the generic line
you posted in your other mail, but I still get the following dmesg:

pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.3.9 - 2005-06-10 (Jouni Malinen 
<jkmaline-kf+aQKke1yb1KXRcyAk9cg@xxxxxxxxxxxxxxxx>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
  Vcc mismatch - skipping this entry
0.0: GetNextTuple: No more items
prism2_config() failed



This is after I removed the orinoca packages, as I got the following dmesg
with them installed:



pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
orinoco 0.15rc2STA (David Gibson 
<hermes-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@xxxxxxxxxxxxxxxx>, Pavel
Roskin <proski-mXXj517/zsQ@xxxxxxxxxxxxxxxx>, et al)
orinoco_cs 0.15rc2STA (David Gibson 
<hermes-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@xxxxxxxxxxxxxxxx>, Pavel
Roskin <proski-mXXj517/zsQ@xxxxxxxxxxxxxxxx>, et al)
orinoco_cs: GetNextTuple(): No matching CIS configuration.  Maybe you need
the ignore_cis_vcc=1 parameter.
0.0: GetFirstTuple: No more items
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.3.9 - 2005-06-10 (Jouni Malinen 
<jkmaline-kf+aQKke1yb1KXRcyAk9cg@xxxxxxxxxxxxxxxx>)
pcmcia: registering new device pcmcia0.1
orinoco_cs: GetNextTuple(): No matching CIS configuration.  Maybe you need
the ignore_cis_vcc=1 parameter.
0.1: GetFirstTuple: No more items



Any ideas? I am just glad that I got multiple sd cards, so I can go back
to the 2.6.15-hh0 version which works really nicely. Does anyone know what
changed between these two versions?

Cheers,
Phil


On Thu, 10 Aug 2006, Joshua Layne wrote:

> Hi Phil,
> have you done:
>
> udevcontrol reload_rules
> kill udev process
> remove card
> remove all modules that might have been loaded for it (hostap_cs, hostap, 
> orinoco_cs, orinoco, hermes) -- rmmod orinoco_cs ....
> /etc/init.d/udev start
>
> I had a lot of trouble with this as first becuase udev wasn't shutting down 
> with the init.d script
>
> HTH,
> joshua
>
> On Thu, 10 Aug 2006 17:28:29 +0100 (BST), "Philipp H. Mohr" 
> <phm4-eQnPN5D1UZ61Qrn1Bg8BZw@xxxxxxxxxxxxxxxx> wrote:
> > Hello Jushua and Marcus,
> >
> > thank you for your answers - I should have found the bug report myself...
> >
> > I tried what you two suggested and I get a slightly different behaviour,
> > but the card still doesn't work. Now my dmesg output is:
> >
> > pccard: card ejected from slot 0
> > hostap_cs: CS_EVENT_CARD_REMOVAL
> > pccard: PCMCIA card inserted into slot 0
> > pcmcia: registering new device pcmcia0.0
> > hostap_cs: setting Vcc=33 (constant)
> > hostap_cs: CS_EVENT_CARD_INSERTION
> > hostap_cs: setting Vcc=50 (from config)
> > Checking CFTABLE_ENTRY 0x01 (default 0x01)
> >   Vcc mismatch - skipping this entry
> > 0.0: GetNextTuple: No more items
> > prism2_config() failed
> >
> > It seems vcc is still causing trouble...
> >
> > ID's have been changed to the ones of my card:
> > ACTION=="add", SYSFS{manf_id}=="0x028a", SYSFS{card_id}=="0x0673",
> > SYSFS{func_id}=="0x06", RUN+="/sbin/modprobe hostap_cs ignore_cis_vcc=1"
> >
> > Any suggestions what else to try?
> >
> > Cheers,
> > Phil
> >
> >
> >
> >
> > On Thu, 10 Aug 2006, Joshua Layne wrote:
> >
> >> Marcus Brown wrote:
> >> > Hi Joshua,
> >> >
> >> > Please note that the only reason for the 'last rule' in my
> >> > original post was so that the ide driver wasn't loaded after
> >> > hostap_cs for the dual-function Sandisk card.
> >> >
> >> > Marcus.
> >> Hi Marcus,
> >> yep - I eventually figured that one out... it took me a while because I
> >> am slow :), but I finally noticed the func_id of ...4 instead of ...6
> >> and then knew it wasn't a networking rule - sorry if my thought process
> >> on that wasn't clear in the bug.
> >>
> >> I am curious whether the 'driver==' rule will catch all the hostap_cs
> >> cards - it is working on mine, but I would love to have some more people
> >> test it.
> >>
> >> thanks again,
> >> josh
> >> >
> >> >
> >> > Joshua Layne wrote:
> >> >> Hi Phil,
> >> >> Please check out this bug and see if the fix works for you.
> >> >> http://handhelds.org/~bugzilla/show_bug.cgi?id=1719
> >> >>
> >> >> This is a common problem for all the hostap_cs cards - this should
> >> >> fix it, but as I have only tested it against my card...
> >> >>
> >> >> HTH,
> >> >> josh
> >> >>
> >> >> Philipp H. Mohr wrote:
> >> >>> Hello,
> >> >>>
> >> >>> I have just tried  v0.8.4-rc3 and I have encountered a problem with
> > my
> >> >>> wifi card: WCF12 linksys
> >> >>>
> >> >>> The card is working fine with Matt's 2.6.15-hh0 kernel from
> >> >>> 10.4.2006 and
> >> >>> familiar v.0.8.3 from 17.4.2006.
> >> >>>
> >> >>> But under  v0.8.4-rc3 I get the following dmesg:
> >> >>>
> >> >>> pccard: PCMCIA card inserted into slot 0
> >> >>> pcmcia: registering new device pcmcia0.0
> >> >>> orinoco_cs: GetNextTuple(): No matching CIS configuration.  Maybe
> >> >>> you need
> >> >>> the ignore_cis_vcc=1 parameter.
> >> >>> 0.0: GetFirstTuple: No more items
> >> >>> pcmcia: registering new device pcmcia0.1
> >> >>> orinoco_cs: GetNextTuple(): No matching CIS configuration.  Maybe
> >> >>> you need
> >> >>> the ignore_cis_vcc=1 parameter.
> >> >>> 0.1: GetFirstTuple: No more items
> >> >>>
> >> >>> I checked all the config files and they are all identical to the
> >> >>> ones in
> >> >>> Matt's release.
> >> >>>
> >> >>>
> >> >>> e.g.:
> >> >>> options orinoco_cs ignore_cis_vcc=1
> >> >>>
> >> >>> is in /etc/modutils/orinoco_cs.conf
> >> >>>
> >> >>> as well as in /etc/modules.conf
> >> >>>
> >> >>> and
> >> >>> ### update-modules: start processing /etc/modutils/orinoco_cs.conf
> >> >>> options orinoco_cs ignore_cis_vcc=1
> >> >>>
> >> >>> The starnge thing under v0.8.4-rc3 is that hermes, orinoco and
> >> >>> hostap are
> >> >>> all getting loaded when I enter the card.
> >> >>> Removing them manually (I have tried all combinations) doesn't make
> > a
> >> >>> difference.
> >> >>> Under Matt's release only the hostap_cs module gets loaded!
> >> >>>
> >> >>> Any ideas how to fix that or what else to try?
> >> >>>
> >> >>> Cheers,
> >> >>> Phil
> >> >>> _______________________________________________
> >> >
> >>
> >> _______________________________________________
> >> H2200-port mailing list
> >> H2200-port-CN5wO63fgwogsBAKwltoeQ@xxxxxxxxxxxxxxxx
> >> https://handhelds.org/mailman/listinfo/h2200-port
> >>
> >
> > --
> > www.cs.kent.ac.uk/~phm4
> > _______________________________________________
> > H2200-port mailing list
> > H2200-port-CN5wO63fgwogsBAKwltoeQ@xxxxxxxxxxxxxxxx
> > https://handhelds.org/mailman/listinfo/h2200-port
>
>

-- 
www.cs.kent.ac.uk/~phm4