Re: v0.8.4-rc3 - wifi problem which doesn't exist underkernel 2.6.15-hh0

Hi Phil,
have you done:

udevcontrol reload_rules
kill udev process
remove card
remove all modules that might have been loaded for it (hostap_cs, hostap, 
orinoco_cs, orinoco, hermes) -- rmmod orinoco_cs ....
/etc/init.d/udev start

I had a lot of trouble with this as first becuase udev wasn't shutting down 
with the init.d script

HTH,
joshua

On Thu, 10 Aug 2006 17:28:29 +0100 (BST), "Philipp H. Mohr" 
<phm4-eQnPN5D1UZ61Qrn1Bg8BZw@xxxxxxxxxxxxxxxx> wrote:
> Hello Jushua and Marcus,
> 
> thank you for your answers - I should have found the bug report myself...
> 
> I tried what you two suggested and I get a slightly different behaviour,
> but the card still doesn't work. Now my dmesg output is:
> 
> pccard: card ejected from slot 0
> hostap_cs: CS_EVENT_CARD_REMOVAL
> pccard: PCMCIA card inserted into slot 0
> pcmcia: registering new device pcmcia0.0
> hostap_cs: setting Vcc=33 (constant)
> hostap_cs: CS_EVENT_CARD_INSERTION
> hostap_cs: setting Vcc=50 (from config)
> Checking CFTABLE_ENTRY 0x01 (default 0x01)
>   Vcc mismatch - skipping this entry
> 0.0: GetNextTuple: No more items
> prism2_config() failed
> 
> It seems vcc is still causing trouble...
> 
> ID's have been changed to the ones of my card:
> ACTION=="add", SYSFS{manf_id}=="0x028a", SYSFS{card_id}=="0x0673",
> SYSFS{func_id}=="0x06", RUN+="/sbin/modprobe hostap_cs ignore_cis_vcc=1"
> 
> Any suggestions what else to try?
> 
> Cheers,
> Phil
> 
> 
> 
> 
> On Thu, 10 Aug 2006, Joshua Layne wrote:
> 
>> Marcus Brown wrote:
>> > Hi Joshua,
>> >
>> > Please note that the only reason for the 'last rule' in my
>> > original post was so that the ide driver wasn't loaded after
>> > hostap_cs for the dual-function Sandisk card.
>> >
>> > Marcus.
>> Hi Marcus,
>> yep - I eventually figured that one out... it took me a while because I
>> am slow :), but I finally noticed the func_id of ...4 instead of ...6
>> and then knew it wasn't a networking rule - sorry if my thought process
>> on that wasn't clear in the bug.
>>
>> I am curious whether the 'driver==' rule will catch all the hostap_cs
>> cards - it is working on mine, but I would love to have some more people
>> test it.
>>
>> thanks again,
>> josh
>> >
>> >
>> > Joshua Layne wrote:
>> >> Hi Phil,
>> >> Please check out this bug and see if the fix works for you.
>> >> http://handhelds.org/~bugzilla/show_bug.cgi?id=1719
>> >>
>> >> This is a common problem for all the hostap_cs cards - this should
>> >> fix it, but as I have only tested it against my card...
>> >>
>> >> HTH,
>> >> josh
>> >>
>> >> Philipp H. Mohr wrote:
>> >>> Hello,
>> >>>
>> >>> I have just tried  v0.8.4-rc3 and I have encountered a problem with
> my
>> >>> wifi card: WCF12 linksys
>> >>>
>> >>> The card is working fine with Matt's 2.6.15-hh0 kernel from
>> >>> 10.4.2006 and
>> >>> familiar v.0.8.3 from 17.4.2006.
>> >>>
>> >>> But under  v0.8.4-rc3 I get the following dmesg:
>> >>>
>> >>> pccard: PCMCIA card inserted into slot 0
>> >>> pcmcia: registering new device pcmcia0.0
>> >>> orinoco_cs: GetNextTuple(): No matching CIS configuration.  Maybe
>> >>> you need
>> >>> the ignore_cis_vcc=1 parameter.
>> >>> 0.0: GetFirstTuple: No more items
>> >>> pcmcia: registering new device pcmcia0.1
>> >>> orinoco_cs: GetNextTuple(): No matching CIS configuration.  Maybe
>> >>> you need
>> >>> the ignore_cis_vcc=1 parameter.
>> >>> 0.1: GetFirstTuple: No more items
>> >>>
>> >>> I checked all the config files and they are all identical to the
>> >>> ones in
>> >>> Matt's release.
>> >>>
>> >>>
>> >>> e.g.:
>> >>> options orinoco_cs ignore_cis_vcc=1
>> >>>
>> >>> is in /etc/modutils/orinoco_cs.conf
>> >>>
>> >>> as well as in /etc/modules.conf
>> >>>
>> >>> and
>> >>> ### update-modules: start processing /etc/modutils/orinoco_cs.conf
>> >>> options orinoco_cs ignore_cis_vcc=1
>> >>>
>> >>> The starnge thing under v0.8.4-rc3 is that hermes, orinoco and
>> >>> hostap are
>> >>> all getting loaded when I enter the card.
>> >>> Removing them manually (I have tried all combinations) doesn't make
> a
>> >>> difference.
>> >>> Under Matt's release only the hostap_cs module gets loaded!
>> >>>
>> >>> Any ideas how to fix that or what else to try?
>> >>>
>> >>> Cheers,
>> >>> Phil
>> >>> _______________________________________________
>> >
>>
>> _______________________________________________
>> H2200-port mailing list
>> H2200-port-CN5wO63fgwogsBAKwltoeQ@xxxxxxxxxxxxxxxx
>> https://handhelds.org/mailman/listinfo/h2200-port
>>
> 
> --
> www.cs.kent.ac.uk/~phm4
> _______________________________________________
> H2200-port mailing list
> H2200-port-CN5wO63fgwogsBAKwltoeQ@xxxxxxxxxxxxxxxx
> https://handhelds.org/mailman/listinfo/h2200-port