Re: v0.8.4-rc3 - wifi problem which doesn't exist under kernel 2.6.15-hh0

Hello Jushua and Marcus,

thank you for your answers - I should have found the bug report myself...

I tried what you two suggested and I get a slightly different behaviour,
but the card still doesn't work. Now my dmesg output is:

pccard: card ejected from slot 0
hostap_cs: CS_EVENT_CARD_REMOVAL
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
  Vcc mismatch - skipping this entry
0.0: GetNextTuple: No more items
prism2_config() failed

It seems vcc is still causing trouble...

ID's have been changed to the ones of my card:
ACTION=="add", SYSFS{manf_id}=="0x028a", SYSFS{card_id}=="0x0673", 
SYSFS{func_id}=="0x06", RUN+="/sbin/modprobe hostap_cs ignore_cis_vcc=1"

Any suggestions what else to try?

Cheers,
Phil




On Thu, 10 Aug 2006, Joshua Layne wrote:

> Marcus Brown wrote:
> > Hi Joshua,
> >
> > Please note that the only reason for the 'last rule' in my
> > original post was so that the ide driver wasn't loaded after
> > hostap_cs for the dual-function Sandisk card.
> >
> > Marcus.
> Hi Marcus,
> yep - I eventually figured that one out... it took me a while because I
> am slow :), but I finally noticed the func_id of ...4 instead of ...6
> and then knew it wasn't a networking rule - sorry if my thought process
> on that wasn't clear in the bug.
>
> I am curious whether the 'driver==' rule will catch all the hostap_cs
> cards - it is working on mine, but I would love to have some more people
> test it.
>
> thanks again,
> josh
> >
> >
> > Joshua Layne wrote:
> >> Hi Phil,
> >> Please check out this bug and see if the fix works for you.
> >> http://handhelds.org/~bugzilla/show_bug.cgi?id=1719
> >>
> >> This is a common problem for all the hostap_cs cards - this should
> >> fix it, but as I have only tested it against my card...
> >>
> >> HTH,
> >> josh
> >>
> >> Philipp H. Mohr wrote:
> >>> Hello,
> >>>
> >>> I have just tried  v0.8.4-rc3 and I have encountered a problem with my
> >>> wifi card: WCF12 linksys
> >>>
> >>> The card is working fine with Matt's 2.6.15-hh0 kernel from
> >>> 10.4.2006 and
> >>> familiar v.0.8.3 from 17.4.2006.
> >>>
> >>> But under  v0.8.4-rc3 I get the following dmesg:
> >>>
> >>> pccard: PCMCIA card inserted into slot 0
> >>> pcmcia: registering new device pcmcia0.0
> >>> orinoco_cs: GetNextTuple(): No matching CIS configuration.  Maybe
> >>> you need
> >>> the ignore_cis_vcc=1 parameter.
> >>> 0.0: GetFirstTuple: No more items
> >>> pcmcia: registering new device pcmcia0.1
> >>> orinoco_cs: GetNextTuple(): No matching CIS configuration.  Maybe
> >>> you need
> >>> the ignore_cis_vcc=1 parameter.
> >>> 0.1: GetFirstTuple: No more items
> >>>
> >>> I checked all the config files and they are all identical to the
> >>> ones in
> >>> Matt's release.
> >>>
> >>>
> >>> e.g.:
> >>> options orinoco_cs ignore_cis_vcc=1
> >>>
> >>> is in /etc/modutils/orinoco_cs.conf
> >>>
> >>> as well as in /etc/modules.conf
> >>>
> >>> and
> >>> ### update-modules: start processing /etc/modutils/orinoco_cs.conf
> >>> options orinoco_cs ignore_cis_vcc=1
> >>>
> >>> The starnge thing under v0.8.4-rc3 is that hermes, orinoco and
> >>> hostap are
> >>> all getting loaded when I enter the card.
> >>> Removing them manually (I have tried all combinations) doesn't make a
> >>> difference.
> >>> Under Matt's release only the hostap_cs module gets loaded!
> >>>
> >>> Any ideas how to fix that or what else to try?
> >>>
> >>> Cheers,
> >>> Phil
> >>> _______________________________________________
> >
>
> _______________________________________________
> H2200-port mailing list
> H2200-port-CN5wO63fgwogsBAKwltoeQ@xxxxxxxxxxxxxxxx
> https://handhelds.org/mailman/listinfo/h2200-port
>

-- 
www.cs.kent.ac.uk/~phm4