Re: v0.8.4-rc3 - wifi problem which doesn't exist under kernel 2.6.15-hh0

Marcus Brown wrote:
> Hi Joshua,
>
> Please note that the only reason for the 'last rule' in my
> original post was so that the ide driver wasn't loaded after
> hostap_cs for the dual-function Sandisk card.
>
> Marcus.
Hi Marcus,
yep - I eventually figured that one out... it took me a while because I 
am slow :), but I finally noticed the func_id of ...4 instead of ...6 
and then knew it wasn't a networking rule - sorry if my thought process 
on that wasn't clear in the bug.

I am curious whether the 'driver==' rule will catch all the hostap_cs 
cards - it is working on mine, but I would love to have some more people 
test it.

thanks again,
josh
> Joshua Layne wrote:
> > Hi Phil,
> > Please check out this bug and see if the fix works for you.
> > http://handhelds.org/~bugzilla/show_bug.cgi?id=1719
> >
> > This is a common problem for all the hostap_cs cards - this should 
> > fix it, but as I have only tested it against my card...
> >
> > HTH,
> > josh
> >
> > Philipp H. Mohr wrote:
> > > Hello,
> > >
> > > I have just tried  v0.8.4-rc3 and I have encountered a problem with my
> > > wifi card: WCF12 linksys
> > >
> > > The card is working fine with Matt's 2.6.15-hh0 kernel from 
> > > 10.4.2006 and
> > > familiar v.0.8.3 from 17.4.2006.
> > >
> > > But under  v0.8.4-rc3 I get the following dmesg:
> > >
> > > pccard: PCMCIA card inserted into slot 0
> > > pcmcia: registering new device pcmcia0.0
> > > orinoco_cs: GetNextTuple(): No matching CIS configuration.  Maybe 
> > > you need
> > > the ignore_cis_vcc=1 parameter.
> > > 0.0: GetFirstTuple: No more items
> > > pcmcia: registering new device pcmcia0.1
> > > orinoco_cs: GetNextTuple(): No matching CIS configuration.  Maybe 
> > > you need
> > > the ignore_cis_vcc=1 parameter.
> > > 0.1: GetFirstTuple: No more items
> > >
> > > I checked all the config files and they are all identical to the 
> > > ones in
> > > Matt's release.
> > >
> > >
> > > e.g.:
> > > options orinoco_cs ignore_cis_vcc=1
> > >
> > > is in /etc/modutils/orinoco_cs.conf
> > >
> > > as well as in /etc/modules.conf
> > >
> > > and
> > > ### update-modules: start processing /etc/modutils/orinoco_cs.conf
> > > options orinoco_cs ignore_cis_vcc=1
> > >
> > > The starnge thing under v0.8.4-rc3 is that hermes, orinoco and 
> > > hostap are
> > > all getting loaded when I enter the card.
> > > Removing them manually (I have tried all combinations) doesn't make a
> > > difference.
> > > Under Matt's release only the hostap_cs module gets loaded!
> > >
> > > Any ideas how to fix that or what else to try?
> > >
> > > Cheers,
> > > Phil
> > > _______________________________________________