Re: Trouble running linux from LAB on 2210.

On 3/30/06, Marat I. Bakeev <hawara-bYXj2mnMXsnQT0dZR+AlfA@xxxxxxxxxxxxxxxx> 
wrote:
> Matt Reimer wrote:
>
> >That looks good. Is your ext2 partition really the first partition?
> >Can you send fdisk output?
> >
> >Do you have an SD card inserted when trying to boot? If LAB finds an
> >ext2 partition with a /boot/zImage file it will try to boot that
> >before trying CF or internal flash.
> >
> >Matt
> >
> >
> No, my sd card was not plugged in the whole time, neither when i
> unpacked the image nor in the 2210.
> it`s lying on the table.. somewhere
>
> i`m not sure if i`ve done the right thing - fdisk -l ?
>
> Disk /dev/sdc: 1025 MB, 1025482752 bytes
> 32 heads, 62 sectors/track, 1009 cylinders
> Units = cylinders of 1984 * 512 = 1015808 bytes
>
>    Device Boot      Start         End      Blocks   Id  System
> /dev/sdc1               1        1009     1000897   83  Linux

That looks fine. I don't know what the problem is. If you had a serial
cable you would see the error on the serial console.

Matt