Re: LAB problem - very strange

Have you tried running it?

I believe the first time I flashed LAB on I also got a "download fial" 
(same missplelling), but it worked jsut the same.

Mattt would definitely be the one to answer this definitively, but have 
you tried booting? That is the definitive test.

Regards,
Josh
Андрей Бондаренко wrote:

> Hello Philipp!
>
> Thank you! I made
>
> 1 - "sudo dd if=~/2ndstage.rescue of=/dev/sda"
>
> 2 - Insert card
>
> 3 - Boot and wait (nothing)
>
> 4 - Plug off card
>
> 5  - Saw "Press power.... Sections=1"
>
> 6 - Saw "Sections=0.....0% Download fial", strange, not "fail", bad spelled.
>
> What do you think may be wrong - card reader, card? iPaq?
>
> 2006/3/21, Philipp H. Mohr <phm4-eQnPN5D1UZ61Qrn1Bg8BZw@xxxxxxxxxxxxxxxx>:
>  
>
> > 2ndstage is small enough.
> >
> > hth,
> > Phil
> >
> > On Tue, 21 Mar 2006, [KOI8-R] Андрей Бондаренко wrote:
> >
> >    
> >
> > > Hello!
> > >
> > > I don't need the complete WinCE image, just 2nd stage bootloader. I
> > > think we can use rapidshare for it, it can not be greater than 33 MB.
> > >
> > > Also if you can give me SSH access I can download it myself.
> > >
> > >
> > >      
> >    
>
>
> --
> WBR,
> Andrey "Shaman007" Bondarenko
>
> http://digitalhardcore.us
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> H2200-port mailing list
> H2200-port-CN5wO63fgwogsBAKwltoeQ@xxxxxxxxxxxxxxxx
> https://handhelds.org/mailman/listinfo/h2200-port
>