|
osdir.com mailing list archive |
|
Subject: Re: pam not working on centos? - msg#00015List: linux.pampam_mysql module and read the installation instructions. You should have a ./configure --enable-ssl options to acquire the correct header files. Please don't post back until you have done that. rupert wrote: > i check the configure script again, and it seems it cant find the md5.h file, > does that mean I cant use DIGEST-MD5 then? > i set the -includedir=/usr/include, but that didnt help > /usr/include/openssl/md5.h > /usr/include/pppd/md5.h > > how can I include that right header? > > thx > > On Mon, Feb 4, 2008 at 2:09 PM, Jason Gerfen <jason.gerfen@xxxxxxxxxxxx> > wrote: >> As I said before. I have never used this module but provided some >> insight into the workings and what the error message *might entail and >> possible solutions to resolving it. >> >> Because I have never used this module myself you will want to read the >> manual for the installation/configuration/administration of this >> authentication module as I have provided as much information as I knew >> about. >> >> >> >> rupert wrote: >> > I had to compile the module, because there isnt a rpm for centOS51. or >> > I didnt find it >> > >> > Most of the stuff works on my cyrus murder, I cant login with imtest >> > and mupdatetest, but i cant >> > get the forntend/backend/mupdate to talk to eaech other. >> > And I can only use imtest with the TLS certifikate, because I use >> > PLAIN as mech, but when the deamon tries to autocreate a mailbox >> > it says "no worthy mechs found" in the logfiles :( >> > >> > thx so far >> > On Mon, Feb 4, 2008 at 1:35 PM, Jason Gerfen <jason.gerfen@xxxxxxxxxxxx> >> wrote: >> >> Check the mysql server to ensure it will allow that host/username >> >> combination. >> >> >> >> >> >> >> >> rupert wrote: >> >> > ok, I missed the part about the /lib64 folder where i should put the >> .so file. >> >> > >> >> > Right now my salsauthentification ist working on one host, but when I >> >> > try to connect to >> >> > mysql server on the first from a second host, pam wont connect. >> >> > But I can login with mysql --host=server1. >> >> > >> >> > Feb 3 11:20:39 backend-A1 saslauthd[9312]: pam_mysql - MySQL error >> >> > (Can't connect to MySQL server on 'server1' (13)) >> >> > Feb 3 11:20:39 backend-A1 unix_chkpwd[9896]: password check failed >> >> > for user (cyrus) >> >> > Feb 3 11:20:39 backend-A1 saslauthd[9312]: pam_unix_auth(imap:auth): >> >> > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= >> >> > user=cyrus >> >> > >> >> > thx >> >> > >> >> > rupert >> >> > >> >> > On Sat, Feb 2, 2008 at 5:48 PM, Rupert <rupertt@xxxxxxxxx> wrote: >> >> >> Jason Gerfen schrieb: >> >> >> >> >> >>> Ensure your openssl libraries are being linked against with the >> >> >> > pam_mysql module or configure it to not use SSL. A good way to >> test is >> >> >> > to run the 'ldd' command on the pam_mysql module and even the 'nm' >> >> >> > command to ensure the proper functions are used and were built >> during >> >> >> > compile. >> >> >> > >> >> >> > >> >> >> how can i make sure everything is in there? >> >> >> the make runs fine, and in the config.h I is written that it uses >> SSL. >> >> >> Can you provide me the right include pathes for centOS like >> >> >> --with-mysql=/usr/whereever ? >> >> >> Im new to the RPM base. >> >> >> >> >> >> >> >> >> thx >> >> >> >> >> >> >> >> >> >> >> >> > rupert wrote: >> >> >> > >> >> >> >> Hello, >> >> >> >> i installed a complete cyrus murder setup in a VMware machine >> and now >> >> >> >> im transferring my configuration to a real 64Bit machine, i >> donwloaded >> >> >> >> pam_mysql and compiled it, >> >> >> >> when I try to login with cyradmin or imtest i always get some >> errors >> >> >> >> and there isnt even a query executed in mysql. >> >> >> >> How can i fix this? >> >> >> >> >> >> >> >> >> >> >> >> badlogin: localhost.localdomain [127.0.0.1] PLAIN [SASL(-16): >> >> >> >> encryption needed to use mechanism: security flags do not match >> >> >> >> required] >> >> >> >> >> >> >> >> badlogin:host1 [127.0.0.1] plaintext cyrus@fbla1host1 SASL(-13): >> >> >> >> authentication failure: checkpass failed >> >> >> >> >> >> >> >> Feb 1 17:29:11 frontend-A1 mupdate[2048]: No worthy mechs found >> >> >> >> >> >> >> >> >> >> >> >> thx a lot >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> >> Pam-list mailing list >> >> >> >> Pam-list@xxxxxxxxxx >> >> >> >> https://www.redhat.com/mailman/listinfo/pam-list >> >> >> >> >> >> >> > >> >> >> > >> >> >> > >> >> >> >> >> >> >> >> >> >> >> > >> >> > _______________________________________________ >> >> > Pam-list mailing list >> >> > Pam-list@xxxxxxxxxx >> >> > https://www.redhat.com/mailman/listinfo/pam-list >> >> >> >> >> >> >> >> -- >> >> Jason Gerfen >> >> >> >> "I practice my religion >> >> while stepping on your >> >> toes..." >> >> ~The Ditty Bops >> >> >> >> _______________________________________________ >> >> >> >> >> >> Pam-list mailing list >> >> Pam-list@xxxxxxxxxx >> >> https://www.redhat.com/mailman/listinfo/pam-list >> >> >> > >> > _______________________________________________ >> > Pam-list mailing list >> > Pam-list@xxxxxxxxxx >> > https://www.redhat.com/mailman/listinfo/pam-list >> >> >> -- >> Jason Gerfen >> >> "I practice my religion >> while stepping on your >> toes..." >> ~The Ditty Bops >> >> _______________________________________________ >> Pam-list mailing list >> Pam-list@xxxxxxxxxx >> https://www.redhat.com/mailman/listinfo/pam-list >> > > _______________________________________________ > Pam-list mailing list > Pam-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/pam-list -- Jason Gerfen "I practice my religion while stepping on your toes..." ~The Ditty Bops Thread at a glance:
Previous Message by Date: click to view message previewRe: pam not working on centos?i check the configure script again, and it seems it cant find the md5.h file, does that mean I cant use DIGEST-MD5 then? i set the -includedir=/usr/include, but that didnt help /usr/include/openssl/md5.h /usr/include/pppd/md5.h how can I include that right header? thx On Mon, Feb 4, 2008 at 2:09 PM, Jason Gerfen <jason.gerfen@xxxxxxxxxxxx> wrote: > As I said before. I have never used this module but provided some > insight into the workings and what the error message *might entail and > possible solutions to resolving it. > > Because I have never used this module myself you will want to read the > manual for the installation/configuration/administration of this > authentication module as I have provided as much information as I knew > about. > > > > rupert wrote: > > I had to compile the module, because there isnt a rpm for centOS51. or > > I didnt find it > > > > Most of the stuff works on my cyrus murder, I cant login with imtest > > and mupdatetest, but i cant > > get the forntend/backend/mupdate to talk to eaech other. > > And I can only use imtest with the TLS certifikate, because I use > > PLAIN as mech, but when the deamon tries to autocreate a mailbox > > it says "no worthy mechs found" in the logfiles :( > > > > thx so far > > On Mon, Feb 4, 2008 at 1:35 PM, Jason Gerfen <jason.gerfen@xxxxxxxxxxxx> > wrote: > >> Check the mysql server to ensure it will allow that host/username > >> combination. > >> > >> > >> > >> rupert wrote: > >> > ok, I missed the part about the /lib64 folder where i should put the > .so file. > >> > > >> > Right now my salsauthentification ist working on one host, but when I > >> > try to connect to > >> > mysql server on the first from a second host, pam wont connect. > >> > But I can login with mysql --host=server1. > >> > > >> > Feb 3 11:20:39 backend-A1 saslauthd[9312]: pam_mysql - MySQL error > >> > (Can't connect to MySQL server on 'server1' (13)) > >> > Feb 3 11:20:39 backend-A1 unix_chkpwd[9896]: password check failed > >> > for user (cyrus) > >> > Feb 3 11:20:39 backend-A1 saslauthd[9312]: pam_unix_auth(imap:auth): > >> > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= > >> > user=cyrus > >> > > >> > thx > >> > > >> > rupert > >> > > >> > On Sat, Feb 2, 2008 at 5:48 PM, Rupert <rupertt@xxxxxxxxx> wrote: > >> >> Jason Gerfen schrieb: > >> >> > >> >>> Ensure your openssl libraries are being linked against with the > >> >> > pam_mysql module or configure it to not use SSL. A good way to > test is > >> >> > to run the 'ldd' command on the pam_mysql module and even the 'nm' > >> >> > command to ensure the proper functions are used and were built > during > >> >> > compile. > >> >> > > >> >> > > >> >> how can i make sure everything is in there? > >> >> the make runs fine, and in the config.h I is written that it uses > SSL. > >> >> Can you provide me the right include pathes for centOS like > >> >> --with-mysql=/usr/whereever ? > >> >> Im new to the RPM base. > >> >> > >> >> > >> >> thx > >> >> > >> >> > >> >> > >> >> > rupert wrote: > >> >> > > >> >> >> Hello, > >> >> >> i installed a complete cyrus murder setup in a VMware machine and > now > >> >> >> im transferring my configuration to a real 64Bit machine, i > donwloaded > >> >> >> pam_mysql and compiled it, > >> >> >> when I try to login with cyradmin or imtest i always get some > errors > >> >> >> and there isnt even a query executed in mysql. > >> >> >> How can i fix this? > >> >> >> > >> >> >> > >> >> >> badlogin: localhost.localdomain [127.0.0.1] PLAIN [SASL(-16): > >> >> >> encryption needed to use mechanism: security flags do not match > >> >> >> required] > >> >> >> > >> >> >> badlogin:host1 [127.0.0.1] plaintext cyrus@fbla1host1 SASL(-13): > >> >> >> authentication failure: checkpass failed > >> >> >> > >> >> >> Feb 1 17:29:11 frontend-A1 mupdate[2048]: No worthy mechs found > >> >> >> > >> >> >> > >> >> >> thx a lot > >> >> >> > >> >> >> _______________________________________________ > >> >> >> Pam-list mailing list > >> >> >> Pam-list@xxxxxxxxxx > >> >> >> https://www.redhat.com/mailman/listinfo/pam-list > >> >> >> > >> >> > > >> >> > > >> >> > > >> >> > >> >> > >> >> > >> > > >> > _______________________________________________ > >> > Pam-list mailing list > >> > Pam-list@xxxxxxxxxx > >> > https://www.redhat.com/mailman/listinfo/pam-list > >> > >> > >> > >> -- > >> Jason Gerfen > >> > >> "I practice my religion > >> while stepping on your > >> toes..." > >> ~The Ditty Bops > >> > >> _______________________________________________ > >> > >> > >> Pam-list mailing list > >> Pam-list@xxxxxxxxxx > >> https://www.redhat.com/mailman/listinfo/pam-list > >> > > > > _______________________________________________ > > Pam-list mailing list > > Pam-list@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/pam-list > > > -- > Jason Gerfen > > "I practice my religion > while stepping on your > toes..." > ~The Ditty Bops > > _______________________________________________ > Pam-list mailing list > Pam-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/pam-list > Next Message by Date: click to view message previewRe: pam not working on centos?On 4 feb 2008, at 15:52, rupert wrote: i check the configure script again, and it seems it cant find the md5.h file, does that mean I cant use DIGEST-MD5 then? i set the -includedir=/usr/include, but that didnt help /usr/include/openssl/md5.h /usr/include/pppd/md5.h how can I include that right header? Do you have pkg-config installed? It's used to detect openssl features. As an alternative, you could use the Fedora EPEL package on Centos 5.1: http://download.fedora.redhat.com/pub/epel/5/i386/repoview/pam_mysql.html Ruben Previous Message by Thread: click to view message previewRe: pam not working on centos?i check the configure script again, and it seems it cant find the md5.h file, does that mean I cant use DIGEST-MD5 then? i set the -includedir=/usr/include, but that didnt help /usr/include/openssl/md5.h /usr/include/pppd/md5.h how can I include that right header? thx On Mon, Feb 4, 2008 at 2:09 PM, Jason Gerfen <jason.gerfen@xxxxxxxxxxxx> wrote: > As I said before. I have never used this module but provided some > insight into the workings and what the error message *might entail and > possible solutions to resolving it. > > Because I have never used this module myself you will want to read the > manual for the installation/configuration/administration of this > authentication module as I have provided as much information as I knew > about. > > > > rupert wrote: > > I had to compile the module, because there isnt a rpm for centOS51. or > > I didnt find it > > > > Most of the stuff works on my cyrus murder, I cant login with imtest > > and mupdatetest, but i cant > > get the forntend/backend/mupdate to talk to eaech other. > > And I can only use imtest with the TLS certifikate, because I use > > PLAIN as mech, but when the deamon tries to autocreate a mailbox > > it says "no worthy mechs found" in the logfiles :( > > > > thx so far > > On Mon, Feb 4, 2008 at 1:35 PM, Jason Gerfen <jason.gerfen@xxxxxxxxxxxx> > wrote: > >> Check the mysql server to ensure it will allow that host/username > >> combination. > >> > >> > >> > >> rupert wrote: > >> > ok, I missed the part about the /lib64 folder where i should put the > .so file. > >> > > >> > Right now my salsauthentification ist working on one host, but when I > >> > try to connect to > >> > mysql server on the first from a second host, pam wont connect. > >> > But I can login with mysql --host=server1. > >> > > >> > Feb 3 11:20:39 backend-A1 saslauthd[9312]: pam_mysql - MySQL error > >> > (Can't connect to MySQL server on 'server1' (13)) > >> > Feb 3 11:20:39 backend-A1 unix_chkpwd[9896]: password check failed > >> > for user (cyrus) > >> > Feb 3 11:20:39 backend-A1 saslauthd[9312]: pam_unix_auth(imap:auth): > >> > authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= > >> > user=cyrus > >> > > >> > thx > >> > > >> > rupert > >> > > >> > On Sat, Feb 2, 2008 at 5:48 PM, Rupert <rupertt@xxxxxxxxx> wrote: > >> >> Jason Gerfen schrieb: > >> >> > >> >>> Ensure your openssl libraries are being linked against with the > >> >> > pam_mysql module or configure it to not use SSL. A good way to > test is > >> >> > to run the 'ldd' command on the pam_mysql module and even the 'nm' > >> >> > command to ensure the proper functions are used and were built > during > >> >> > compile. > >> >> > > >> >> > > >> >> how can i make sure everything is in there? > >> >> the make runs fine, and in the config.h I is written that it uses > SSL. > >> >> Can you provide me the right include pathes for centOS like > >> >> --with-mysql=/usr/whereever ? > >> >> Im new to the RPM base. > >> >> > >> >> > >> >> thx > >> >> > >> >> > >> >> > >> >> > rupert wrote: > >> >> > > >> >> >> Hello, > >> >> >> i installed a complete cyrus murder setup in a VMware machine and > now > >> >> >> im transferring my configuration to a real 64Bit machine, i > donwloaded > >> >> >> pam_mysql and compiled it, > >> >> >> when I try to login with cyradmin or imtest i always get some > errors > >> >> >> and there isnt even a query executed in mysql. > >> >> >> How can i fix this? > >> >> >> > >> >> >> > >> >> >> badlogin: localhost.localdomain [127.0.0.1] PLAIN [SASL(-16): > >> >> >> encryption needed to use mechanism: security flags do not match > >> >> >> required] > >> >> >> > >> >> >> badlogin:host1 [127.0.0.1] plaintext cyrus@fbla1host1 SASL(-13): > >> >> >> authentication failure: checkpass failed > >> >> >> > >> >> >> Feb 1 17:29:11 frontend-A1 mupdate[2048]: No worthy mechs found > >> >> >> > >> >> >> > >> >> >> thx a lot > >> >> >> > >> >> >> _______________________________________________ > >> >> >> Pam-list mailing list > >> >> >> Pam-list@xxxxxxxxxx > >> >> >> https://www.redhat.com/mailman/listinfo/pam-list > >> >> >> > >> >> > > >> >> > > >> >> > > >> >> > >> >> > >> >> > >> > > >> > _______________________________________________ > >> > Pam-list mailing list > >> > Pam-list@xxxxxxxxxx > >> > https://www.redhat.com/mailman/listinfo/pam-list > >> > >> > >> > >> -- > >> Jason Gerfen > >> > >> "I practice my religion > >> while stepping on your > >> toes..." > >> ~The Ditty Bops > >> > >> _______________________________________________ > >> > >> > >> Pam-list mailing list > >> Pam-list@xxxxxxxxxx > >> https://www.redhat.com/mailman/listinfo/pam-list > >> > > > > _______________________________________________ > > Pam-list mailing list > > Pam-list@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/pam-list > > > -- > Jason Gerfen > > "I practice my religion > while stepping on your > toes..." > ~The Ditty Bops > > _______________________________________________ > Pam-list mailing list > Pam-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/pam-list > Next Message by Thread: click to view message previewRe: pam not working on centos?On 4 feb 2008, at 15:52, rupert wrote: i check the configure script again, and it seems it cant find the md5.h file, does that mean I cant use DIGEST-MD5 then? i set the -includedir=/usr/include, but that didnt help /usr/include/openssl/md5.h /usr/include/pppd/md5.h how can I include that right header? Do you have pkg-config installed? It's used to detect openssl features. As an alternative, you could use the Fedora EPEL package on Centos 5.1: http://download.fedora.redhat.com/pub/epel/5/i386/repoview/pam_mysql.html Ruben Loading Comments...
|
|
