Re: Sandisk ConnectPlus

That's what I thought... I'll look into it.

On another note, I'm having troubles using the svn client function.
When I try to do svn co
http://svn.rungie.com/svn/gumstix-buildroot/trunk, it comes back with
'-sh: svn: not found

Any idea what's going on?

Thanks,
-Chris

On 7/12/05, Craig Hughes <craig@xxxxxxxxxxx> wrote:
> On Jul 12, 2005, at 3:53 PM, Chris Clough wrote:
> 
> > wlan0: could not set interface UP - no PRI f/w
> 
> I'm not a wireless guru, but that looks to me like the problem is
> that you need to download some firmware to the card before you can
> use it.  The best place to ask for help is probably on a wireless-
> tools forum or such; anyone using that card under linux (gumstix or
> not) will likely have the same problem.  You can probably use the
> wireless tools to load the firmware image to the card's RAM somehow
> when the card is detected.  Looks like everything's OK at the CF layer.
> 
> C
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
> July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
> core and dual graphics technology at this free one hour event hosted by HP,
> AMD, and NVIDIA.  To register visit http://www.hp.com/go/dualwebinar
> _______________________________________________
> gumstix-users mailing list
> gumstix-users@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/gumstix-users
>


-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
core and dual graphics technology at this free one hour event hosted by HP,
AMD, and NVIDIA.  To register visit http://www.hp.com/go/dualwebinar