Sandisk ConnectPlus

Hi all,

This topic has come up in the past, but it seems as though no one has
provided a definitive strategy to get it operational.

We just received a Gumstix today, and can not get this card functioning.

We have considered updating the hostap, but wanted to find out if
others have done the same thing.

The 'stix detects the card, but it gives us the follow:

hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.2.5 - 2004-10-03 (Jouni Malinen <jkmaline@xxxxxxxxx>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: ignoring Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0047, io.base=0x0000, len=128
hostap_cs: Registered netdevice wifi0
IRQ49 (GPIO26): falling edges
wifi0: Interrupt, but dev not OK
hostap_cs: index 0x01: Vcc 5.0, irq 49, io 0xc4860000-0xc486007f
IRQ104 (GPIO81): rising falling edges
pxa2xx_udc: version 14-Dec-2003
usb0: Ethernet Gadget, version: Equinox 2004
usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep6in-bulk
usb0: MAC 0a:00:ab:41:fe:e1
usb0: HOST MAC 0a:00:ab:41:fe:e2
usb0: RNDIS ready
hostap_cs: assuming no Primary image in flash - card initialization not complete
d
wifi0: test Genesis mode with HCR 0x1f
prism2_pccard_cor_sreset: original COR 45
prism2_pccard_genesis_sreset: original COR 45
Readback test failed, HCR 0x1f write 00 e1 a1 ff read 38 00 38 00
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 45
prism2_pccard_genesis_sreset: original COR 45
Readback test failed, HCR 0x0f write 00 e1 a1 ff read 38 00 38 00
prism2_pccard_genesis_sreset: original COR 45
wifi0: registered netdevice wlan0
NET: Registered protocol family 17
wlan0: could not set interface UP - no PRI f/w
wlan0: cannot set RID fc0e (len=34) - no PRI f/w
wlan0: updating basic rate set automatically to match with the new supported rat
e set
wlan0: cannot set RID fcb3 (len=2) - no PRI f/w
wlan0: failed to set cnfBasicRates
wlan0: cannot set RID fc84 (len=2) - no PRI f/w
wlan0: TXRateControl/cnfSupportedRates setting to 0xf failed
wlan0: cannot set RID fc02 (len=34) - no PRI f/w
wlan0: could not set interface UP - no PRI f/w

Any help/input would be greatly appreciated.

Thanks,
-Chris


-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
core and dual graphics technology at this free one hour event hosted by HP,
AMD, and NVIDIA.  To register visit http://www.hp.com/go/dualwebinar