linux.distributions.gumstix.general (thread)

gumstix is alive now.. usbnet is misbehaving, Khaled Hassounah
- Re: gumstix is alive now.. usbnet is misbehaving, Dave Smith
  - Re: gumstix is alive now.. usbnet is misbehaving, Craig Hughes
Tweener redesign?, Sean Luke
- Re: Tweener redesign?, Dave Hylands
Erik Bos/EHV/RESEARCH/PHILIPS is out of the office., Erik Bos
audiostix mic input gain, Darren Gibbs
- Re: audiostix mic input gain, Craig Hughes
gumstix in Nice (France) region, Florian Loitsch
voltage problem?, dnozner@xxxxxxxxx
- Re: voltage problem?, Holly Gates
- Re: voltage problem?, Dave Hylands
patch question (fastmode i2c and lm-sensors), Simon de Bakker
Gumstix time, David I S Mandala
- Re: Gumstix time, Craig Hughes
  - Re: Gumstix time, David I S Mandala
  - Re: Gumstix time, David I S Mandala
    - Re: Gumstix time, Craig Hughes
dropbear on ppp0, Philip Trickett (List)
- Re: dropbear on ppp0, Craig Hughes
  - Re: dropbear on ppp0, Philip Trickett (List)
    - Re: dropbear on ppp0, Philip Trickett (List)
    - Re: dropbear on ppp0, Craig Hughes
    - Re: dropbear on ppp0, Philip Trickett (List)
    - Re: dropbear on ppp0, Dave Hylands
    - Re: dropbear on ppp0, Philip Trickett (List)
    - Re: dropbear on ppp0, David I S Mandala
JTAG Cable?, reback
- Re: JTAG Cable?, Gordon Kruberg
  - RE: JTAG Cable?, Marc Mulcahy
    - Re: JTAG Cable?, Dave Hylands
    - Re: JTAG Cable?, Leon Heller
    - Re: JTAG Cable?, Leon Heller
    - Re: JTAG Cable?, Dave Hylands
    - Re: JTAG Cable?, Leon Heller
    - Re: JTAG Cable?, Dave Hylands
    - Re: JTAG Cable?, Leon Heller
    - Re: JTAG Cable?, Dave Hylands
    - Re: JTAG Cable?, Gordon Kruberg
    - RE: JTAG Cable?, Marc Mulcahy
    - Re: JTAG Cable?, Bhaskar Mukherjee
    - Re: JTAG Cable?, Leon Heller
    - Re: JTAG Cable?, Leon Heller
    - Re: JTAG Cable?, Bhaskar Mukherjee
GPIO sleep mode and conections?, Gert Sørensen
Sharp LCD for Gumstix, Andreas Granig
- Re: Sharp LCD for Gumstix, Khaled Hassounah
  - Re: Sharp LCD for Gumstix, Craig Hughes
    - Re: Sharp LCD for Gumstix, Philip Trickett (List)
- Re: Sharp LCD for Gumstix, Khaled Hassounah
cross-compiling ghostscript, Jon Zalesky
Buildroot with Uclibc, Marc Mulcahy
- Re: Buildroot with Uclibc, Craig Hughes
C++ on gumstix, Athanasios Anastasiou
- Re: C++ on gumstix, Florian Loitsch
  - Re: C++ on gumstix, Craig Hughes
Buildroot with Glibc, Marc Mulcahy
sa1100-rtc periodic irq problem, Sven Wandersleb
- Re: sa1100-rtc periodic irq problem, Craig Hughes
  - Re: sa1100-rtc periodic irq problem, Sven Wandersleb
- Re: sa1100-rtc periodic irq problem, Sven Wandersleb
on board wifi?, dnozner@xxxxxxxxx
Re:Re: Interrupt time... fixed, dnozner@xxxxxxxxx
- Re: Re:Re: Interrupt time... fixed, Dave Hylands
Layout Problem on TH-Breakout, reback
- Re: Layout Problem on TH-Breakout, N.E.Whiteford
  - Re: Layout Problem on TH-Breakout, capiman
    - Re: Layout Problem on TH-Breakout, Nava Whiteford
- Re: Layout Problem on TH-Breakout, Holly Gates
Is NSSP free to use ? Has anyone full detail description of register NSSCR1 ? Intel spec. is not complete..., capiman
- NSSP via own C program (a la pxaregs) crashes gumstix, capiman
- Re: Is NSSP free to use ? Has anyone full detail description of register NSSCR1 ? Intel spec. is not complete..., capiman
  - Re: Re: Is NSSP free to use ? Has anyone full detail description of register NSSCR1 ? Intel spec. is not complete..., Dave Hylands
Avoiding corruption on ext2fs, Sean Luke
- Re: Avoiding corruption on ext2fs, Craig R Hughes
bluetooth audio status, Brad Midgley
- Re: bluetooth audio status, Brad Midgley
  - Re: bluetooth audio status, Craig R Hughes
My new gumstix arrived dead? I'm heart broken, Khaled Hassounah
- Re: My new gumstix arrived dead? I'm heart broken, Dave Hylands
- Re: My new gumstix arrived dead? I'm heart broken, Florian Loitsch
- Re: My new gumstix arrived dead? I'm heart broken, Khaled Hassounah
  - Re: My new gumstix arrived dead? I'm heart broken, N.E.Whiteford
Interrupt time..., dnozner@xxxxxxxxx
- Re: Interrupt time..., Dave Hylands
LCD Size, Daniel Morrigan
- Re: LCD Size, Nava Whiteford
  - Re: LCD Size, Jim Walters
    - Re: LCD Size, N.E.Whiteford
- Re: LCD Size, Craig R Hughes
suid scripts, Sean Luke
- Re: suid scripts, Craig Hughes
  - Re: suid scripts, Dave Hylands
  - Re: suid scripts, Sven Wandersleb
Can't discover bluetooth after connected, Duane Wessels
- Re: Can't discover bluetooth after connected, Brad Midgley
  - Re: Can't discover bluetooth after connected, Nick Taptiklis
    - Re: Can't discover bluetooth after connected, Duane Wessels
Interesting problem, Dave Hylands
- Re: Interesting problem, Craig Hughes
  - Re: Interesting problem, Dave Hylands
robotics gumstix list/forum, Radu Bogdan Rusu
- Re: robotics gumstix list/forum, Dave Hylands
ttyS0, ttyS1, ttyS2, ttyS3, Radu Bogdan Rusu
- Re: ttyS0, ttyS1, ttyS2, ttyS3, Dave Hylands
- Re:ttyS0, ttyS1, ttyS2, ttyS3, dnozner@xxxxxxxxx
Problem booting new Gumstix, Marc Mulcahy
- Re: Problem booting new Gumstix, Craig Hughes
  - RE: Problem booting new Gumstix, Marc Mulcahy
Software controllable relay ports?, Jeff Johnson
- Re: Software controllable relay ports?, Dave Hylands
  - Re: Software controllable relay ports?, Jeff Johnson
    - Re: Software controllable relay ports?, Dave Hylands
Problems with audio driver pxa-ac97, Boris Novak
- Re: Problems with audio driver pxa-ac97, Craig Hughes
- Re: Problems with audio driver pxa-ac97, Boris Novak
  - Program for benchmark, Boris Novak
    - Re: Program for benchmark, albertd
    - Re: Program for benchmark, Dave Hylands
    - Re: Program for benchmark, Craig R Hughes
    - Re: Program for benchmark, Craig R Hughes
USB Messages, Gert Sørensen
- Re: USB Messages, Dave Hylands
- RE: RE: USB messages, Gert Sørensen
  - Re: RE: RE: USB messages, Dave Hylands
Expansion board including a lythium power source, Gilles Antonetti
New expansion board, Gilles Antonetti
Quick robostix question, Sean Luke
- Re: Quick robostix question, Dave Hylands
buildroot collaborate, Brad Midgley
Oups...That is not what it meant, Athanasios Anastasiou
Fixed Point is not THAT bad after all :-), Athanasios Anastasiou
- Re: Fixed Point is not THAT bad after all :-), Dave Smith
Re: Sounds Good, Athanasios Anastasiou
1.8" hard drives, Doug Sutherland
gumstix at Linux User Groups, Don Anderson
- Re: gumstix at Linux User Groups, Brad Midgley
- Re: gumstix at Linux User Groups, Radu Bogdan Rusu
  - Re: gumstix at Linux User Groups, Radu Bogdan Rusu
bnep0 static ip... How?, dnozner@xxxxxxxxx
- Re: bnep0 static ip... How?, Darren Gibbs
Re: Re: Sounds Good (Thanassis Anastassiou), Thanassis Anastassiou
- Re: Re: Re: Sounds Good (Thanassis Anastassiou), Darren Gibbs
RS-232 conections, Gert Sørensen
- Re: RS-232 conections, mark gross
iptables doesn't compile, Gilles Antonetti
Software Suspend, Doug Sutherland
- Re: Software Suspend, Craig Hughes
  - Re: Software Suspend, mark gross
    - Re: Software Suspend, Doug Sutherland
    - Re: Software Suspend, Craig Hughes
Sounds good., Thanassis Anastassiou
- Re: Sounds good., Florian Loitsch
Discoverable Gumstix, Ian Anderson
- Re: Discoverable Gumstix, Brad Midgley
- Re: Discoverable Gumstix, Ian Anderson
  - Re: Discoverable Gumstix, Brad Midgley
- Re: Discoverable Gumstix, Ian Anderson
Limited Expansion: Can't have wiress and extra storage?, Doug Sutherland
- Re: Limited Expansion: Can't have wiress and extra storage?, Darren Gibbs
- Re: Limited Expansion: Can't have wiress and extra storage?, Craig Hughes
  - Re: Limited Expansion: Can't have wiress and extra storage?, Daniel Morrigan
Re: I2C Bus use with Gumstix...., Achim Walther
- AW: I2C Bus use with Gumstix...., Andreas Trenkwalder
  - Re: I2C Bus use with Gumstix...., Achim Walther
    - AW: I2C Bus use with Gumstix...., Andreas Trenkwalder
adding alsa-lib to buildroot, Brad Midgley
- Re: adding alsa-lib to buildroot, Craig Hughes
- Re: adding alsa-lib to buildroot, Darren Gibbs
  - Re: adding alsa-lib to buildroot, Brad Midgley
    - Re: adding alsa-lib to buildroot, Craig Hughes
untarring new system, Brad Midgley
- Re: untarring new system, Craig Hughes
  - Re: untarring new system, Dave Hylands
  - Re: untarring new system, Brad Midgley
Re: gumstix-users digest, Vol 1 #484 - 4 msgs, Athanasios Anastasiou
- Re: Re: gumstix-users digest, Vol 1 #484 - 4 msgs, Darren Gibbs
- Re: Re: gumstix-users digest, Vol 1 #484 - 4 msgs, Brad Midgley
Some errors during boot, Dave Hylands
- Re: Some errors during boot, Dave Hylands
  - Re: Re: Some errors during boot, Craig Hughes
- Re: Some errors during boot, Craig Hughes
floating point status, Brad Midgley
- Re: floating point status, kuehnle
- Re: floating point status, Craig Hughes
  - Re: floating point status, Brad Midgley
    - Re: floating point status, Craig Hughes
    - Re: floating point status, Brad Midgley
    - Re: floating point status, Dave Hylands
    - Modifying a Waysmall Case to Fit the Cfstix, Vivek G
    - Re: Modifying a Waysmall Case to Fit the Cfstix, Craig Hughes
matching release versions, Brad Midgley
- Re: matching release versions, Tim Auton
iptables on gumstix ?, Gilles Antonetti
Serial or Serial null, Devraj Mukherjee
- Re: Serial or Serial null, Dave Hylands
  - Re: Serial or Serial null, Bhaskar Mukherjee
Using the gumstix as a JTAG, Dave Hylands
- Re: Using the gumstix as a JTAG, David Farrell
  - Re: Using the gumstix as a JTAG, Dave Hylands
- Re: Using the gumstix as a JTAG, Craig Hughes
Connex does not boot with Etherstix, paul
- Re: Connex does not boot with Etherstix, Nava Whiteford
  - Re: Connex does not boot with Etherstix, paul
gdb, Darren Gibbs
- Re: gdb, Craig Hughes
  - Re: gdb, Darren Gibbs
    - Re: gdb, Craig Hughes
    - Re: gdb, Darren Gibbs
    - Re: gdb, Darren Gibbs
Newbie question, Devraj Mukherjee
- Re: Newbie question, Radu Bogdan Rusu
  - Re: Newbie question, Devraj Mukherjee
    - Re: Newbie question, Radu Bogdan Rusu
- Re: Newbie question, Bhaskar Mukherjee
[Fwd: Help! Kernel/environment issue], reback
ttyS1 physical pin locations, Philip Trickett (List)
strace, Jonathan Bredin
Help! Kernel/environment issue, reback
- Re: Help! Kernel/environment issue, Craig Hughes
RS232 conections, Gert Sørensen
- Re: RS232 conections, Dave Hylands
- Re: RS232 conections, Gert Sørensen
  - Re: Re: RS232 conections, Dave Hylands
/dev/rtc, ioctl problem, Sven Wandersleb
Strange ttyS2 behaviour ..., Renaud CUNY
- Re: Strange ttyS2 behaviour ..., Renaud CUNY
  - Re: Strange ttyS2 behaviour ..., Jim Walters
    - Re: Strange ttyS2 behaviour ..., Renaud CUNY
OS timers, dnozner@xxxxxxxxx
- Frequency scaling, Marek Jawurek
  - Re: Frequency scaling, Darren Gibbs
    - Re: Frequency scaling, Craig Hughes
- Re: OS timers, Craig Hughes
- Re: OS timers, dnozner@xxxxxxxxx
  - Re: OS timers, Dave Hylands
Custom Kernel Config?, reback
- Re: Custom Kernel Config?, Darren Gibbs
  - LCD Interfacing, N.E.Whiteford
Which kermit do people use under Win32, Dave Hylands
- Re: Which kermit do people use under Win32, mark gross
  - Re: Which kermit do people use under Win32, Dave Hylands
Question for Holly Gates (LCD again), Bhaskar Mukherjee
- Re: Question for Holly Gates (LCD again), Holly Gates
  - Re: Question for Holly Gates (LCD again), Jason R. Martin
    - Re: Question for Holly Gates (LCD again), Holly Gates
- Re: Question for Holly Gates (LCD again), Bhaskar Mukherjee
Connex and Etherstix, Raymond Blum
- RE: Connex and Etherstix, Gilles Antonetti
  - Re: Connex and Etherstix, Renaud CUNY
    - Re: Connex and Etherstix, Raymond Blum
    - Re: Connex and Etherstix, Dave Hylands
    - Re: Connex and Etherstix, Craig Hughes
    - Re: Connex and Etherstix, Raymond Blum
- RE: Connex and Etherstix, Dan Cherill
Relay @ GPIO pin (newbe), Ignacio Mella M.
GPIO PWM from user space (Newbie), dnozner@xxxxxxxxx
- Re: GPIO PWM from user space (Newbie), Jim Walters
- GPIO PWM from user space (Newbie), Renzo
Broken serial port?, Joe Buczek
- Re: Broken serial port?, Craig Hughes
diethotplug, Dan Cherill
Audiostix compatible Mics, Darren Gibbs
- Re: Audiostix compatible Mics, Craig Hughes
Access serial port from kernel module ?, capiman
- Re: Access serial port from kernel module ?, Craig Hughes
Audiostix, UCB1400 and PXA GPIOs, Darren Gibbs
- Re: Audiostix, UCB1400 and PXA GPIOs, Bhaskar Mukherjee
  - Re: Audiostix, UCB1400 and PXA GPIOs, Darren Gibbs
    - Re: Audiostix, UCB1400 and PXA GPIOs, Bhaskar Mukherjee
    - Re: Audiostix, UCB1400 and PXA GPIOs, Craig Hughes
    - Re: Audiostix, UCB1400 and PXA GPIOs, Darren Gibbs
    - Re: Audiostix, UCB1400 and PXA GPIOs, Craig Hughes
rs232->atmel, Florian Loitsch
- Re: rs232->atmel, N.E.Whiteford
- Re: rs232->atmel, Craig Hughes
  - Re: rs232->atmel, Dave Hylands
/dev/ttyS0 difficulties with Brainstem, Jonathan Bredin
- Re: /dev/ttyS0 difficulties with Brainstem, Dave Hylands
  - Re: /dev/ttyS0 difficulties with Brainstem, Craig Hughes
- Re: /dev/ttyS0 difficulties with Brainstem, Jonathan Bredin
- Re: /dev/ttyS0 difficulties with Brainstem, Jonathan Bredin
Max current capability of the GPIO pins, Tom
- Re: Max current capability of the GPIO pins, Craig Hughes
- Re:Max current capability of the GPIO pins, Thomas Luby
  - Re: Re:Max current capability of the GPIO pins, Gordon Kruberg
    - Re: Re:Max current capability of the GPIO pins, Craig Hughes
ttyS3 on crippled cable, Florian Loitsch
- Re: ttyS3 on crippled cable, Darren Gibbs
- Re: ttyS3 on crippled cable, Darren Gibbs
  - Power over serial, Marek Jawurek
    - Re: Power over serial, Bouwens / Mehl
    - Re: Power over serial, Marek Jawurek
    - Re: Power over serial, Bouwens / Mehl
    - Re: Power over serial, Marek Jawurek
    - Re: Power over serial, Jérôme Multrier
    - Re: Power over serial, Craig Hughes
  - Re: ttyS3 on crippled cable, Jérôme Multrier
  - Re: ttyS3 on crippled cable, Florian Loitsch
    - Re: ttyS3 on crippled cable, Craig Hughes
USB only with serial-cable, Florian Loitsch
- Re: USB only with serial-cable, Florian Loitsch
- Re: USB only with serial-cable, Dave Hylands
  - Re: USB only with serial-cable, Florian Loitsch
    - Re: USB only with serial-cable, Dave Hylands
    - Re: USB only with serial-cable, Jim Walters
Second serial port and bluetooth, Keith Sullivan
- Re: Second serial port and bluetooth, Craig Hughes
  - Re: Second serial port and bluetooth, Peter Darling
    - Re: Second serial port and bluetooth, Florian Loitsch
    - Re: Second serial port and bluetooth, Peter Darling
    - Re: Second serial port and bluetooth, Florian Loitsch
    - Re: Second serial port and bluetooth, Peter Darling
    - Re: Second serial port and bluetooth, Peter Darling
    - Re: Second serial port and bluetooth, Peter Darling
    - Re: Second serial port and bluetooth, Henk Muller
    - Re: Second serial port and bluetooth, Craig Hughes
- Re: Second serial port and bluetooth, Dave Hylands
- Re: Second serial port and bluetooth, Jérôme Multrier
- Re: Second serial port and bluetooth, Henk Muller
  - Re: Second serial port and bluetooth, Florian Loitsch
    - Re: Second serial port and bluetooth, Craig Hughes
    - Re: Second serial port and bluetooth, Henk Muller
    - Re: Second serial port and bluetooth, Florian Loitsch
    - Re: Second serial port and bluetooth, Craig Hughes
    - Re: Second serial port and bluetooth, Bouwens / Mehl
mkdosfs compilation, Dan Cherill
- Re: mkdosfs compilation, Craig Hughes
Gumstix emulation, Gilles Antonetti
- Re: Gumstix emulation, Craig Hughes
Difficulties cross-compiling a module for Python, �sgeir Ingvarsson
Problem loading smc91x, Gilles Antonetti
- Re: Problem loading smc91x, Craig Hughes
  - RE: Problem loading smc91x, Gilles Antonetti
ccache, Florian Loitsch
- Re: ccache, Craig Hughes
  - Re: ccache, Florian Loitsch
April 1st Teaser, Craig R Hughes
- RE: April 2nd, bouwens . mehl
Re: gumstix at Canfield Scientific, Craig Hughes
Help with RS-232 signals., Gert Sørensen
- Problem with Gumstix and AVR, handika Handoko
  - Re: Problem with Gumstix and AVR, David I S Mandala
    - Re: Problem with Gumstix and AVR, handika Handoko
    - Re: Problem with Gumstix and AVR, Florian Loitsch
    - Re: Problem with Gumstix and AVR, handika Handoko
    - Re: Problem with Gumstix and AVR, Florian Loitsch
    - Re: Problem with Gumstix and AVR, handika Handoko
    - Re: Problem with Gumstix and AVR, Florian Loitsch
    - Re: Problem with Gumstix and AVR, handika Handoko
    - Re: Problem with Gumstix and AVR, Craig Hughes
    - Re: Problem with Gumstix and AVR, handika Handoko
Re: Serial Connection Freezes, Henk Muller
- Re: Serial Connection Freezes, Paul Hampson