linux.distributions.gumstix.general (thread)

Mystery Expansion Board, Dave Hylands
- Re: Mystery Expansion Board, Craig Hughes
- Re: Mystery Expansion Board, Craig Hughes
  - Re: Mystery Expansion Board, Jon Mayo
non-standard baud rates, Darren Gibbs
- Re: non-standard baud rates, Craig Hughes
MMC funnies., mgross
- Re: MMC funnies., Craig Hughes
r344 fails for me, mgross
Re: Gumstix Device Drivers, Craig Hughes
- Re: Re: Gumstix Device Drivers, Dave Hylands
  - Re: Re: Gumstix Device Drivers, Craig Hughes
    - Re: Re: Gumstix Device Drivers, Dave Hylands
OBEX file transfer over bluetooth, Triona Ryan
- Re: OBEX file transfer over bluetooth, Craig Hughes
- Re: OBEX file transfer over bluetooth, Dave Smith
- Re: OBEX file transfer over bluetooth, Ian Anderson
- Re: OBEX file transfer over bluetooth, Triona Ryan
Dynamic Loading of Kernel Modules, judkovics
trunk tip builds but fails to run., mark gross
- trunk tip builds but fails to run., Ralph Metzler
  - Re: trunk tip builds but fails to run., Craig Hughes
    - Re: trunk tip builds but fails to run., mark gross
    - Re: trunk tip builds but fails to run., Darren Gibbs
    - Re: trunk tip builds but fails to run., Craig Hughes
    - Re: trunk tip builds but fails to run., Bouwens / Mehl
    - Re: trunk tip builds but fails to run., Craig Hughes
    - Re: trunk tip builds but fails to run., Jim Walters
    - Re: trunk tip builds but fails to run., Craig Hughes
    - Re: trunk tip builds but fails to run., Jim Walters
    - Re: trunk tip builds but fails to run., mark gross
    - Re: trunk tip builds but fails to run., Craig Hughes
  - Re: trunk tip builds but fails to run., mark gross
    - Re: trunk tip builds but fails to run., Craig Hughes
    - Re: trunk tip builds but fails to run., mark gross
    - Re: trunk tip builds but fails to run., Craig Hughes
unhandled fault hanging cumstix., mark gross
- Re: unhandled fault hanging cumstix., Darren Gibbs
  - Re: unhandled fault hanging cumstix., mark gross
    - Re: unhandled fault hanging gumstix., Darren Gibbs
    - Re: unhandled fault hanging gumstix., Dave Hylands
    - Re: unhandled fault hanging gumstix., Craig Hughes
    - Re: unhandled fault hanging gumstix., Ralph Metzler
    - Re: unhandled fault hanging gumstix., Ralph Metzler
    - Re: unhandled fault hanging gumstix., Craig Hughes
    - Re: unhandled fault hanging gumstix., Ralph Metzler
    - Re: unhandled fault hanging gumstix., Craig Hughes
    - Re: unhandled fault hanging gumstix., Ralph Metzler
    - Re: unhandled fault hanging gumstix., Craig Hughes
    - Re: unhandled fault hanging gumstix., Ralph Metzler
    - Re: unhandled fault hanging gumstix., Craig Hughes
- Re: unhandled fault hanging cumstix., Triona Ryan
Booting Errors, David Judkovics
Advice on wiring up the I2C level coverters?, mark gross
proposed bluetooth getting started wiki page, Darren Gibbs
- Re: proposed bluetooth getting started wiki page, Florian Loitsch
bluetooth, Darren Gibbs
- Re: bluetooth, Triona Ryan
Re: sd revision, Florian Loitsch
- Re: sd revision, Craig Hughes
  - Re: sd revision, Florian Loitsch
    - Re: sd revision, Florian Loitsch
    - Re: sd revision, Craig Hughes
    - Re: sd revision, Florian Loitsch
Problem with /dev/ttyS3, Thomas R. Quisel
- Re: Problem with /dev/ttyS3, Jason von Nieda
  - Re: Problem with /dev/ttyS3, Lawrence Harris
    - Re: Problem with /dev/ttyS3, Jason von Nieda
Re: power plug dimensions - thanks!, Chris Radcliff
Project compile issue, Basham, Richard R
- Re: Project compile issue, Craig Hughes
- RE: Project compile issue, Basham, Richard R
  - Re: Project compile issue, Craig Hughes
- RE: Project compile issue, Basham, Richard R
root_fs_arm problems, Triona Ryan
- Re: root_fs_arm problems, Darren Gibbs
- Re: root_fs_arm problems, Craig Hughes
Sample Kernel Module Makefile, judkovics
- Re: Sample Kernel Module Makefile, Benjamin Gavalda
cross compile python for gumstix, Nik Martin
- Re: cross compile python for gumstix, Diez B. Roggisch
  - Re: cross compile python for gumstix, Craig Hughes
    - Re: cross compile python for gumstix, Diez B. Roggisch
    - Re: cross compile python for gumstix, Craig Hughes
    - Re: cross compile python for gumstix, Darren Gibbs
    - Re: cross compile python for gumstix, Craig Hughes
    - Re: cross compile python for gumstix, Todd Valentic
    - Re: Re: cross compile python for gumstix, Craig Hughes
    - Re: cross compile python for gumstix, Todd Valentic
    - Re: Re: cross compile python for gumstix, Craig Hughes
    - Re: cross compile python for gumstix, Todd Valentic
    - Re: Re: cross compile python for gumstix, Nik Martin
- Re: cross compile python for gumstix, Craig Hughes
- Re: cross compile python for gumstix, Tim Auton
- Re: cross compile python for gumstix, Tim Auton
GPIO - Hardware : Clarification on my question, Steve Hobbs
- Re: GPIO - Hardware : Clarification on my question, Arthur Magill
r342...kernel panic, Triona Ryan
GPIO - Hardware, Steve Hobbs
- Re: GPIO - Hardware, Craig Hughes
  - Re: GPIO - Hardware, Benjamin Gavalda
- RE: GPIO - Hardware, Victor Mulyk
  - Re: GPIO - Hardware, Larry Brigman
    - Re: GPIO - Hardware, Dan Taylor
  - Re: GPIO - Hardware, Jason von Nieda
    - Re: GPIO - Hardware, Dan Taylor
- RE: GPIO - Hardware, Klemmack, Johann
- RE: GPIO - Hardware, Victor Mulyk
- RE: GPIO - Hardware, Maymi, F. MAJ EECS
  - Re: GPIO - Hardware, Craig Hughes
MMC hotplug?, Darren Gibbs
power plug dimensions?, Chris Radcliff
- Re: power plug dimensions?, Dave Hylands
- Re: power plug dimensions?, Gordon Kruberg
- Re: power plug dimensions?, Chris Radcliff
  - Re: power plug dimensions?, Eric Heinemann
  - Re: power plug dimensions?, Dave Hylands
    - Re: power plug dimensions?, Arthur Magill
    - Re: power plug dimensions?, Dave Hylands
    - Re: power plug dimensions?, Arthur Magill
    - Re: power plug dimensions?, Dave Hylands
- RE: power plug dimensions?, Basham, Richard R
Silly question about the etherstix..., Dan Taylor
- Fwd: Silly question about the etherstix..., Don Anderson
- Re: Silly question about the etherstix..., Dan Taylor
root_fs_arm, Triona Ryan
User Mode testing of the Gumstix builds, Nik Martin
- Re: User Mode testing of the Gumstix builds, Jon Mayo
  - Re: User Mode testing of the Gumstix builds, Nik Martin
    - Re: User Mode testing of the Gumstix builds, Craig Hughes
R342 & scp, Steve Hobbs
- Re: R342 & scp, Jason von Nieda
  - Re: R342 & scp, Craig R Hughes
software for JTAG, Victor Mulyk
Tweener / Audiostix UARTs, Darren Gibbs
svn question, Darren Gibbs
- Re: svn question, Craig Hughes
  - Re: svn question, Darren Gibbs
    - Re: svn question, Craig Hughes
- Re: svn question, Tim Auton
Ethernix prototype..., Sir Graham (Terra)
MMC problem, and a recount of some experiences, Henk Aling
- Re: MMC problem, and a recount of some experiences, Florian Loitsch
  - Re: MMC problem, and a recount of some experiences, Henk Aling
As promised, something new and fun..., Craig Hughes
- Re: As promised, something new and fun..., Dave Hylands
  - Re: As promised, something new and fun..., Craig Hughes
    - Re: As promised, something new and fun..., Dave Hylands
    - Re: As promised, something new and fun..., Ian Anderson
    - Re: As promised, something new and fun..., Craig Hughes
    - Re: As promised, something new and fun..., Ian Anderson
- Re: As promised, something new and fun..., Craig Hughes
  - Re: As promised, something new and fun..., Philip Trickett
  - Re: As promised, something new and fun..., Dave Hylands
  - Re: As promised, something new and fun..., Dave Hylands
  - Re: As promised, something new and fun..., Martin Maurer
    - Re: As promised, something new and fun..., Craig R Hughes
  - Comprehensive list of gumstix boards?, Benjamin Hodgens
    - Re: Comprehensive list of gumstix boards?, Dave Hylands
- RE: As promised, something new and fun..., Klemmack, Johann
Similar devices like gumstix from other vendors ?, Martin Maurer
- Re: Similar devices like gumstix from other vendors ?, Dave Hylands
  - Re: Similar devices like gumstix from other vendors ?, Chris
    - Re: Similar devices like gumstix from other vendors ?, David Farrell
    - Re: Similar devices like gumstix from other vendors ?, Craig Hughes
    - Re: Similar devices like gumstix from other vendors ?, Martin Maurer
    - Re: Similar devices like gumstix from other vendors ?, Craig Hughes
- Re: Similar devices like gumstix from other vendors ?, Jon Mayo
- Re: Similar devices like gumstix from other vendors ?, Sean Luke
  - Re: Similar devices like gumstix from other vendors ?, Craig Hughes
  - USB Host capabilities?, Joshua Ferraro
    - Re: USB Host capabilities?, Dave Hylands
I2C Pullups?, Jason von Nieda
- Re: I2C Pullups?, Dave Hylands
  - Re: I2C Pullups?, Jason von Nieda
    - Re: I2C Pullups?, Dave Hylands
    - Re: I2C Pullups?, Dave Hylands
    - Re: I2C Pullups?, Jason von Nieda
- Re: I2C Pullups?, judkovics
  - Re: I2C Pullups?, Dave Hylands
USBNet and Audiostix support, Darren Gibbs
- Re: USBNet and Audiostix support, Craig Hughes
  - Re: USBNet and Audiostix support, Darren Gibbs
Latest build with good USBNet and MMC, Darren Gibbs
- Re: Latest build with good USBNet and MMC, Florian Loitsch
  - Re: Latest build with good USBNet and MMC, Darren Gibbs
    - Re: Latest build with good USBNet and MMC, Florian Loitsch
    - Re: Latest build with good USBNet and MMC, Darren Gibbs
    - Re: Latest build with good USBNet and MMC, Darren Gibbs
    - Re: Latest build with good USBNet and MMC, Florian Loitsch
    - Re: Latest build with good USBNet and MMC, Darren Gibbs
    - Re: Latest build with good USBNet and MMC, Florian Loitsch
    - Re: Latest build with good USBNet and MMC, Darren Gibbs
    - Re: Latest build with good USBNet and MMC, Darren Gibbs
    - Re: Latest build with good USBNet and MMC, Dave Hylands
    - Re: Latest build with good USBNet and MMC, Darren Gibbs
sshd and scp on the gumstix?, Sean Luke
- Re: sshd and scp on the gumstix?, Craig R Hughes
Cool new photos, Craig R Hughes
- Re: Cool new photos, Dave Hylands
I2C Bus and Gumstix GPIO, Basham, Richard R
- Re: I2C Bus and Gumstix GPIO, Dave Hylands
bluetooths range?, Ozgur Sefik Altunyurt
u-boot brain damage?, Jon Mayo
- Re: u-boot brain damage?, Craig Hughes
  - Re: u-boot brain damage?, Jon Mayo
    - Re: u-boot brain damage?, Craig Hughes
    - Re: u-boot brain damage?, Jon Mayo
    - Re: u-boot brain damage?, Phil Wilshire
    - Re: u-boot brain damage?, Jon Mayo
- Re: u-boot brain damage?, Dave Hylands
  - Re: u-boot brain damage?, Craig Hughes
- RE: u-boot brain damage?, Victor Mulyk
  - RE: u-boot brain damage?, David Farrell
    - Re: u-boot brain damage?, Benny Simonsen
  - RE: u-boot brain damage?, Philip Trickett
    - RE: u-boot brain damage?, David Farrell
  - Re: u-boot brain damage?, Benjamin Gavalda
  - Re: u-boot brain damage?, Benny Simonsen
- RE: u-boot brain damage?, Victor Mulyk
buildroot and ulimit don't mix, Jon Mayo
How to rebuild kernel without full rebuild?, Jason von Nieda
- Re: How to rebuild kernel without full rebuild?, Craig Hughes
  - Re: How to rebuild kernel without full rebuild?, Jason von Nieda
SVN updates, Craig Hughes
- Re: SVN updates, Jason von Nieda
- SVN updates, Craig Hughes
  - Re: SVN updates, Darren Gibbs
    - Re: SVN updates, Craig Hughes
    - Re: SVN updates, Darren Gibbs
  - Re: SVN updates, Phil Wilshire
    - Re: SVN updates, Craig R Hughes
  - Re: SVN updates, David Farrell
    - Re: SVN update, Craig R Hughes
- RE: SVN updates, Victor Mulyk
  - Re: SVN updates, Craig Hughes
- RE: SVN updates, Victor Mulyk
  - Re: SVN updates, Jon Mayo
    - Re: SVN updates, Craig Hughes
    - Re: SVN updates, Philip Trickett
- RE: SVN updates, Basham, Richard R
Serial Voltage Levels, Paul Hampson
- Re: Serial Voltage Levels, Jon Mayo
Scheduling Latency, Darren Gibbs
- RE: Scheduling Latency, Heilpern, Mark
  - Re: Scheduling Latency, Dave Hylands
RE: [SPAM] - Re: USB, MMC and I2C problems in build 315 - Email found in subject, Heilpern, Mark
- Re: [SPAM] - Re: USB, MMC and I2C problems in build 315 - Email found in subject, Jason von Nieda
  - Re: [SPAM] - Re: USB, MMC and I2C problems in build 315 - Email found in subject, Craig Hughes
audio again, Darren Gibbs
- Re: audio again, Craig Hughes
Etherstix?, Jon Mayo
- Re: Etherstix?, Craig Hughes
buildroot, Chris Radcliff
- Re: buildroot (gettext dependency), Chris Radcliff
mmc mount, Triona Ryan
- Re: mmc mount, Craig Hughes
- Re: mmc mount, Triona Ryan
- Re: mmc mount, Heilpern, Mark
- Re: mmc mount, Triona Ryan
- Re: mmc mount, Heilpern, Mark
- Re: mmc mount, Triona Ryan
- Re: mmc mount, Triona Ryan
- Re: mmc mount, Heilpern, Mark
- Re: mmc mount, Triona Ryan
Replace filesystem image using the usb connection, Steve Hobbs
- Re: Replace filesystem image using the usb connection, Craig Hughes
Speed of toggling and reading IO pins ?, Martin Maurer
- Re: Speed of toggling and reading IO pins ?, Dave Hylands
- Re: Speed of toggling and reading IO pins ?, Darren Gibbs
  - Re: Speed of toggling and reading IO pins ?, Craig Hughes
How to buy gumstix ? Where to get a bit more detailed informations ?, Martin Maurer
- Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Dave Hylands
  - Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig Hughes
  - Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig Hughes
    - Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Philip Trickett
    - Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig Hughes
    - Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Martin Maurer
- Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig Hughes
  - Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Darren Gibbs
    - Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig R Hughes
- Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig Hughes
Fw: FFT test binary 2, Benny Simonsen
- FFT Results!, Darren Gibbs
USB, MMC and I2C problems in build 315, Jason von Nieda
- Re: USB, MMC and I2C problems in build 315, Craig R Hughes
  - Re: USB, MMC and I2C problems in build 315, Jason von Nieda
    - Re: USB, MMC and I2C problems in build 315, Benjamin Gavalda
    - Re: USB, MMC and I2C problems in build 315, Craig Hughes
    - Re: USB, MMC and I2C problems in build 315, Jason von Nieda
    - Re: USB, MMC and I2C problems in build 315, Jason von Nieda
FFT test binary, Darren Gibbs
- FFT test binary 2, Darren Gibbs
  - Re: FFT test binary 2, Craig Hughes
    - Re: FFT test binary 2, Darren Gibbs
    - Re: FFT test binary 2, Jon Mayo
    - Re: FFT test binary 2, Darren Gibbs
    - Re: FFT test binary 2, Benny Simonsen
    - Re: FFT test binary 2, Darren Gibbs
    - Re: FFT test binary 2, Benny Simonsen
    - Re: FFT test binary 2, Darren Gibbs
USB Ethernet gadget..... SOS!, David M Judkovics
- Re: USB Ethernet gadget..... SOS!, Craig Hughes
Re: errors after reflashing, maybe messed up partitions, Peter Darling
- Re: errors after reflashing, maybe messed up partitions, Peter Darling
- Re: errors after reflashing, maybe messed up partitions, Craig Hughes
Re: build 311 and ntp, Bouwens / Mehl
- Re: build 311 and ntp, Craig R Hughes
I2C Bus use with Gumstix...., Jay
- Re: I2C Bus use with Gumstix...., Craig R Hughes
- RE: I2C Bus use with Gumstix...., Basham, Richard R
  - Re: I2C Bus use with Gumstix...., Dave Hylands
- RE: I2C Bus use with Gumstix...., Basham, Richard R
  - Re: I2C Bus use with Gumstix...., Dave Hylands
Gumstix Audio, Darren Gibbs
- Re: Gumstix Audio, Craig R Hughes
  - Re: Gumstix Audio, Darren Gibbs
    - Re: Gumstix Audio, Craig Hughes