linux.distributions.gumstix.general (date)

linux.distributions.gumstix.general (date)

January 31, 2005

Re: Mystery Expansion Board, Jon Mayo
Re: Mystery Expansion Board, Craig Hughes
Re: Mystery Expansion Board, Craig Hughes
Mystery Expansion Board, Dave Hylands
Re: non-standard baud rates, Craig Hughes
non-standard baud rates, Darren Gibbs

January 30, 2005

Re: MMC funnies., Craig Hughes
MMC funnies., mgross
r344 fails for me, mgross

January 29, 2005

Re: trunk tip builds but fails to run., Craig Hughes
Re: trunk tip builds but fails to run., mark gross
Re: OBEX file transfer over bluetooth, Triona Ryan
Re: trunk tip builds but fails to run., Jim Walters
Re: unhandled fault hanging gumstix., Craig Hughes
Re: Re: Gumstix Device Drivers, Dave Hylands
Re: Gumstix Device Drivers, Craig Hughes
Re: trunk tip builds but fails to run., Craig Hughes
Re: unhandled fault hanging gumstix., Craig Hughes
Re: Re: Gumstix Device Drivers, Craig Hughes
Re: unhandled fault hanging gumstix., Ralph Metzler
Re: Re: Gumstix Device Drivers, Dave Hylands
Re: unhandled fault hanging gumstix., Craig Hughes
Re: trunk tip builds but fails to run., Craig Hughes
Re: OBEX file transfer over bluetooth, Ian Anderson
Re: OBEX file transfer over bluetooth, Dave Smith

January 28, 2005

Re: OBEX file transfer over bluetooth, Craig Hughes
Re: unhandled fault hanging gumstix., Ralph Metzler
Re: trunk tip builds but fails to run., mark gross
Re: trunk tip builds but fails to run., Jim Walters
Re: unhandled fault hanging gumstix., Craig Hughes
OBEX file transfer over bluetooth, Triona Ryan
Re: trunk tip builds but fails to run., Bouwens / Mehl
Dynamic Loading of Kernel Modules, judkovics
Re: unhandled fault hanging gumstix., Ralph Metzler
Re: unhandled fault hanging gumstix., Craig Hughes
Re: unhandled fault hanging gumstix., Ralph Metzler
Re: trunk tip builds but fails to run., Craig Hughes
Re: trunk tip builds but fails to run., Craig Hughes
Re: Similar devices like gumstix from other vendors ?, Craig Hughes

January 27, 2005

Re: unhandled fault hanging gumstix., Ralph Metzler
Re: trunk tip builds but fails to run., Craig Hughes
Re: trunk tip builds but fails to run., Darren Gibbs
Re: Similar devices like gumstix from other vendors ?, Martin Maurer
Re: unhandled fault hanging gumstix., Dave Hylands
Re: unhandled fault hanging gumstix., Darren Gibbs
Re: trunk tip builds but fails to run., mark gross
Re: trunk tip builds but fails to run., mark gross
Re: unhandled fault hanging cumstix., mark gross

January 26, 2005

Re: GPIO - Hardware, Craig Hughes
RE: GPIO - Hardware, Maymi, F. MAJ EECS

January 25, 2005

Re: trunk tip builds but fails to run., Craig Hughes
Re: unhandled fault hanging cumstix., Darren Gibbs
trunk tip builds but fails to run., Ralph Metzler
Re: unhandled fault hanging cumstix., Triona Ryan
trunk tip builds but fails to run., mark gross

January 24, 2005

unhandled fault hanging cumstix., mark gross
Booting Errors, David Judkovics

January 23, 2005

Advice on wiring up the I2C level coverters?, mark gross
Re: SVN updates, Philip Trickett
Re: proposed bluetooth getting started wiki page, Florian Loitsch
proposed bluetooth getting started wiki page, Darren Gibbs

January 22, 2005

Re: bluetooth, Triona Ryan
bluetooth, Darren Gibbs
Re: sd revision, Florian Loitsch
Re: Re: cross compile python for gumstix, Nik Martin
Re: sd revision, Craig Hughes
Re: Comprehensive list of gumstix boards?, Dave Hylands
Comprehensive list of gumstix boards?, Benjamin Hodgens

January 21, 2005

Re: sd revision, Florian Loitsch
Re: sd revision, Florian Loitsch
Re: sd revision, Craig Hughes
Re: sd revision, Florian Loitsch
Re: cross compile python for gumstix, Todd Valentic

January 20, 2005

Re: Re: cross compile python for gumstix, Craig Hughes
Re: cross compile python for gumstix, Todd Valentic
Re: Re: cross compile python for gumstix, Craig Hughes
Re: cross compile python for gumstix, Todd Valentic
Re: cross compile python for gumstix, Craig Hughes
Re: Problem with /dev/ttyS3, Jason von Nieda
Re: cross compile python for gumstix, Darren Gibbs
Re: Problem with /dev/ttyS3, Lawrence Harris
Re: Problem with /dev/ttyS3, Jason von Nieda
Problem with /dev/ttyS3, Thomas R. Quisel
Re: cross compile python for gumstix, Craig Hughes
Re: cross compile python for gumstix, Diez B. Roggisch
Re: power plug dimensions?, Dave Hylands
Re: power plug dimensions - thanks!, Chris Radcliff
RE: power plug dimensions?, Basham, Richard R
RE: Project compile issue, Basham, Richard R
Re: Project compile issue, Craig Hughes
RE: Project compile issue, Basham, Richard R
Re: Project compile issue, Craig Hughes
Project compile issue, Basham, Richard R

January 19, 2005

Re: root_fs_arm problems, Craig Hughes
Re: power plug dimensions?, Arthur Magill
Re: Sample Kernel Module Makefile, Benjamin Gavalda
Re: root_fs_arm problems, Darren Gibbs
Re: cross compile python for gumstix, Tim Auton
Re: cross compile python for gumstix, Tim Auton
Re: cross compile python for gumstix, Craig Hughes
root_fs_arm problems, Triona Ryan
Re: power plug dimensions?, Arthur Magill
Sample Kernel Module Makefile, judkovics
Re: power plug dimensions?, Dave Hylands
Re: cross compile python for gumstix, Craig Hughes
RE: GPIO - Hardware, Victor Mulyk
Re: cross compile python for gumstix, Diez B. Roggisch
Re: GPIO - Hardware : Clarification on my question, Arthur Magill
Re: power plug dimensions?, Dave Hylands
Re: power plug dimensions?, Chris Radcliff
cross compile python for gumstix, Nik Martin
Re: power plug dimensions?, Eric Heinemann
GPIO - Hardware : Clarification on my question, Steve Hobbs
RE: GPIO - Hardware, Klemmack, Johann

January 18, 2005

RE: SVN updates, Basham, Richard R
Re: GPIO - Hardware, Benjamin Gavalda
Re: GPIO - Hardware, Jason von Nieda
Re: GPIO - Hardware, Craig Hughes
Re: GPIO - Hardware, Dan Taylor
Re: GPIO - Hardware, Dan Taylor
r342...kernel panic, Triona Ryan
Re: GPIO - Hardware, Larry Brigman
Re: SVN updates, Craig Hughes
RE: GPIO - Hardware, Victor Mulyk
GPIO - Hardware, Steve Hobbs
Re: SVN updates, Jon Mayo
Re: power plug dimensions?, Gordon Kruberg
MMC hotplug?, Darren Gibbs
Re: power plug dimensions?, Dave Hylands
power plug dimensions?, Chris Radcliff

January 17, 2005

Re: User Mode testing of the Gumstix builds, Craig Hughes
Re: Silly question about the etherstix..., Dan Taylor
Fwd: Silly question about the etherstix..., Don Anderson
Re: User Mode testing of the Gumstix builds, Nik Martin
RE: SVN updates, Victor Mulyk
Re: mmc mount, Triona Ryan
Re: mmc mount, Heilpern, Mark
Re: mmc mount, Triona Ryan
Silly question about the etherstix..., Dan Taylor
root_fs_arm, Triona Ryan
Re: mmc mount, Triona Ryan
Re: User Mode testing of the Gumstix builds, Jon Mayo
User Mode testing of the Gumstix builds, Nik Martin

January 16, 2005

Re: R342 & scp, Craig R Hughes
Re: R342 & scp, Jason von Nieda
R342 & scp, Steve Hobbs
Re: As promised, something new and fun..., Craig R Hughes
Re: SVN update, Craig R Hughes
Re: SVN updates, Craig R Hughes

January 15, 2005

Re: SVN updates, David Farrell
Re: SVN updates, Darren Gibbs
Re: SVN updates, Phil Wilshire
Re: As promised, something new and fun..., Martin Maurer
Re: SVN updates, Craig Hughes
Re: MMC problem, and a recount of some experiences, Henk Aling
Re: SVN updates, Darren Gibbs
Re: SVN updates, Craig Hughes
RE: SVN updates, Victor Mulyk

January 14, 2005

SVN updates, Craig Hughes
software for JTAG, Victor Mulyk
Re: I2C Pullups?, Jason von Nieda
Tweener / Audiostix UARTs, Darren Gibbs

January 13, 2005

Re: buildroot (gettext dependency), Chris Radcliff
Re: svn question, Craig Hughes
Re: svn question, Tim Auton
Re: svn question, Darren Gibbs

January 12, 2005

Re: svn question, Craig Hughes
svn question, Darren Gibbs
Ethernix prototype..., Sir Graham (Terra)
Re: MMC problem, and a recount of some experiences, Florian Loitsch
Re: USBNet and Audiostix support, Darren Gibbs
Re: I2C Pullups?, Dave Hylands
MMC problem, and a recount of some experiences, Henk Aling
RE: As promised, something new and fun..., Klemmack, Johann
Re: As promised, something new and fun..., Dave Hylands
Re: As promised, something new and fun..., Dave Hylands
Re: As promised, something new and fun..., Philip Trickett
Re: As promised, something new and fun..., Craig Hughes
Re: As promised, something new and fun..., Ian Anderson
Re: As promised, something new and fun..., Craig Hughes
Re: As promised, something new and fun..., Ian Anderson
Re: USB Host capabilities?, Dave Hylands
Re: As promised, something new and fun..., Dave Hylands
Re: As promised, something new and fun..., Craig Hughes
Re: As promised, something new and fun..., Dave Hylands
As promised, something new and fun..., Craig Hughes
USB Host capabilities?, Joshua Ferraro
Re: Similar devices like gumstix from other vendors ?, Craig Hughes
Re: Similar devices like gumstix from other vendors ?, Sean Luke
Re: Similar devices like gumstix from other vendors ?, Craig Hughes
Re: Similar devices like gumstix from other vendors ?, David Farrell
Re: Similar devices like gumstix from other vendors ?, Jon Mayo
Re: Similar devices like gumstix from other vendors ?, Chris

January 11, 2005

Similar devices like gumstix from other vendors ?, Martin Maurer
Re: Similar devices like gumstix from other vendors ?, Dave Hylands
Re: Scheduling Latency, Dave Hylands
Re: I2C Pullups?, judkovics

January 10, 2005

Re: I2C Pullups?, Dave Hylands
Re: USBNet and Audiostix support, Craig Hughes
Re: I2C Pullups?, Dave Hylands
Re: I2C Pullups?, Jason von Nieda
Re: I2C Pullups?, Dave Hylands
I2C Pullups?, Jason von Nieda
USBNet and Audiostix support, Darren Gibbs

January 09, 2005

Re: Latest build with good USBNet and MMC, Darren Gibbs
Re: Latest build with good USBNet and MMC, Darren Gibbs
Re: Latest build with good USBNet and MMC, Florian Loitsch
Re: Latest build with good USBNet and MMC, Dave Hylands
Re: Latest build with good USBNet and MMC, Darren Gibbs
Re: Latest build with good USBNet and MMC, Darren Gibbs
Re: Latest build with good USBNet and MMC, Florian Loitsch
Re: sshd and scp on the gumstix?, Craig R Hughes
Re: Latest build with good USBNet and MMC, Darren Gibbs

January 08, 2005

Re: Latest build with good USBNet and MMC, Darren Gibbs
Re: Latest build with good USBNet and MMC, Florian Loitsch
Re: Latest build with good USBNet and MMC, Darren Gibbs
Re: u-boot brain damage?, Jon Mayo
Re: u-boot brain damage?, Phil Wilshire
Re: Latest build with good USBNet and MMC, Florian Loitsch
Latest build with good USBNet and MMC, Darren Gibbs
sshd and scp on the gumstix?, Sean Luke
Re: Cool new photos, Dave Hylands
Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig R Hughes
Cool new photos, Craig R Hughes
RE: u-boot brain damage?, David Farrell
Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Darren Gibbs
Re: I2C Bus and Gumstix GPIO, Dave Hylands
I2C Bus and Gumstix GPIO, Basham, Richard R

January 07, 2005

RE: u-boot brain damage?, Victor Mulyk
Re: u-boot brain damage?, Benny Simonsen
Re: u-boot brain damage?, Jon Mayo
Re: u-boot brain damage?, Benjamin Gavalda
RE: u-boot brain damage?, Philip Trickett
Re: u-boot brain damage?, Benny Simonsen
RE: u-boot brain damage?, David Farrell
RE: u-boot brain damage?, Victor Mulyk
bluetooths range?, Ozgur Sefik Altunyurt
Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Martin Maurer
Re: I2C Bus use with Gumstix...., Dave Hylands
RE: I2C Bus use with Gumstix...., Basham, Richard R
Re: u-boot brain damage?, Craig Hughes
Re: u-boot brain damage?, Craig Hughes
Re: u-boot brain damage?, Dave Hylands
Re: u-boot brain damage?, Jon Mayo
Re: u-boot brain damage?, Craig Hughes
u-boot brain damage?, Jon Mayo

January 06, 2005

buildroot and ulimit don't mix, Jon Mayo
Re: How to rebuild kernel without full rebuild?, Jason von Nieda
Re: How to rebuild kernel without full rebuild?, Craig Hughes
RE: I2C Bus use with Gumstix...., Basham, Richard R
Re: I2C Bus use with Gumstix...., Dave Hylands
How to rebuild kernel without full rebuild?, Jason von Nieda
Re: SVN updates, Jason von Nieda

January 05, 2005

SVN updates, Craig Hughes
Re: Speed of toggling and reading IO pins ?, Craig Hughes
Re: Serial Voltage Levels, Jon Mayo
RE: Scheduling Latency, Heilpern, Mark
Re: Speed of toggling and reading IO pins ?, Darren Gibbs
Serial Voltage Levels, Paul Hampson
Scheduling Latency, Darren Gibbs
Re: mmc mount, Heilpern, Mark
Re: [SPAM] - Re: USB, MMC and I2C problems in build 315 - Email found in subject, Craig Hughes
Re: mmc mount, Triona Ryan
Re: mmc mount, Heilpern, Mark
Re: [SPAM] - Re: USB, MMC and I2C problems in build 315 - Email found in subject, Jason von Nieda
Re: mmc mount, Triona Ryan
RE: [SPAM] - Re: USB, MMC and I2C problems in build 315 - Email found in subject, Heilpern, Mark

January 04, 2005

Re: USB, MMC and I2C problems in build 315, Jason von Nieda
Re: audio again, Craig Hughes
Re: Etherstix?, Craig Hughes
audio again, Darren Gibbs
Etherstix?, Jon Mayo
Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig Hughes
buildroot, Chris Radcliff
Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Philip Trickett
Re: USB Ethernet gadget..... SOS!, Craig Hughes
Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig Hughes
Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig Hughes
Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig Hughes
Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Craig Hughes
Re: mmc mount, Craig Hughes
Re: Replace filesystem image using the usb connection, Craig Hughes
Re: USB, MMC and I2C problems in build 315, Jason von Nieda
Re: USB, MMC and I2C problems in build 315, Craig Hughes
Re: How to buy gumstix ? Where to get a bit more detailed informations ?, Dave Hylands
Re: Speed of toggling and reading IO pins ?, Dave Hylands
mmc mount, Triona Ryan
Replace filesystem image using the usb connection, Steve Hobbs
Speed of toggling and reading IO pins ?, Martin Maurer
How to buy gumstix ? Where to get a bit more detailed informations ?, Martin Maurer
Re: USB, MMC and I2C problems in build 315, Benjamin Gavalda

January 03, 2005

Re: USB, MMC and I2C problems in build 315, Jason von Nieda
Re: USB, MMC and I2C problems in build 315, Craig R Hughes
FFT Results!, Darren Gibbs
Fw: FFT test binary 2, Benny Simonsen
Re: FFT test binary 2, Darren Gibbs
Re: FFT test binary 2, Benny Simonsen
Re: FFT test binary 2, Darren Gibbs
Re: FFT test binary 2, Benny Simonsen
Re: FFT test binary 2, Darren Gibbs
Re: FFT test binary 2, Jon Mayo
Re: FFT test binary 2, Darren Gibbs
USB, MMC and I2C problems in build 315, Jason von Nieda

January 02, 2005

Re: FFT test binary 2, Craig Hughes
FFT test binary 2, Darren Gibbs
FFT test binary, Darren Gibbs
USB Ethernet gadget..... SOS!, David M Judkovics

January 01, 2005

Re: errors after reflashing, maybe messed up partitions, Craig Hughes
Re: Gumstix Audio, Craig Hughes
Re: errors after reflashing, maybe messed up partitions, Peter Darling
Re: errors after reflashing, maybe messed up partitions, Peter Darling
Re: Gumstix Audio, Darren Gibbs
Re: build 311 and ntp, Craig R Hughes
Re: I2C Bus use with Gumstix...., Craig R Hughes
Re: Gumstix Audio, Craig R Hughes
Re: build 311 and ntp, Bouwens / Mehl
I2C Bus use with Gumstix...., Jay
Gumstix Audio, Darren Gibbs

News | FAQ | advertise