Re: [2.6.8 ->] Problems, hci_usb dosn't work.

On Wed, 2004-09-22 at 20:52, Marcel Holtmann wrote:
> > 2 joysticks, one 6in1 card reader and one muvodrive, it all works.
> > And, it registers the device correctly it just can't read from it.
> 
> are these devices all USB 2.0 capable? If yes, then they are handled by
> the ehci_hcd host controller driver.

All except the monitor that also registers it self via usb, =)
(I am really surprised about that actually)

Sam Sung Electronics
Manufacturer: Samsung Electronics
Serial Number: HVAWA04398
Speed: 1.5Mb/s (low)
USB Version:  1.10
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 0419
Product Id: 8002
Revision Number:  2.00

And here is the usb dongle output
hci_usb
Speed: 12Mb/s (full)
USB Version:  1.10
Device Class: e0(unk. ) <== Looks like something missing
Device Subclass: 01
Device Protocol: 01
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 0db0
Product Id: 1967
Revision Number:  5.25

Should i change some identifier and test some?

> Check that first and then report it to the Linux USB mailing list. It is
> more an USB issue then LKML related.

yep... Assumed, i just assumed that some small thing might be broken and
that you usb ppl would be quicker to spot it =)

-- 
Ian Kumlien <pomac () vapor ! com> -- http://pomac.netswarm.net

signature.asc
Description: This is a digitally signed message part