Intel 3945ABG - problems on 2.6.30.X

Hello

I got 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG  
[Golan] Network Connection (rev 02) in my T61.

I use this acpi script to switch it on and off:

#!/bin/bash

state=`cat /sys/bus/pci/drivers/iwl3945/0000:03:00.0/enable`

if [ "$state" == "1" ]; then

        logger "Wifi off"

        if [ -x /etc/rc.d/rc.inet1 ]; then
                . /etc/rc.d/rc.inet1 stop
        fi

        echo disable > /proc/acpi/ibm/bluetooth

        /usr/bin/osd.sh "Wifi: [Off]"
else
        logger "Wifi on"

        if [ -x /etc/rc.d/rc.inet1 ]; then
                . /etc/rc.d/rc.inet1 start
        fi

        if [ -x /etc/rc.d/rc.inet1 ]; then
                . /etc/rc.d/rc.inet1 eth0_stop
        fi

        echo disable > /proc/acpi/ibm/bluetooth

        /usr/bin/osd.sh "Wifi: [On]"
fi


and it works quite nice on 2.6.29. Value in  
/sys/bus/pci/drivers/iwl3945/0000:03:00.0/enable is changing.
I just want to try this out on some 2.6.30.X. But on 2.6.30.X it don't  
works :/ How should I do it on 2.6.30.X?

I tried to do some echo 0 > enable but with no sucess.

There's one more thing. On 2.6.30.X LED from wifi indicator is not  
blinking when there is wifi traffic.
On 2.6.29 this LED blinks until you do not do supsend-to-ram. After STR it  
do not blinks.

If I need to post some parts of .config (from 2.6.30.X) or any other data,  
just tell me, but I thinkg I configured it out good.

--
pozdr0
dienet

"Old C programmers never die. They're just cast into void."

----------------------------------------------------------------------
Wygraj zestaw kosmetykow!
Sprawdz >> http://link.interia.pl/f22ac

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/