On Tue, Dec 23, 2003 at 10:29:07AM -0700, Tom Rini wrote:
> On Mon, Dec 22, 2003 at 09:11:31PM -0800, Andrew Morton wrote:
>
> [snip]
> > moto-ppc32-booting-fix.patch
> > Fix booting on a number of Motorola PPC32 machines
>
> The following, based on comments from Keith Owens is better, please
> replace, thanks:
[snip]
The following patch depends on the above, and fixes the 'znetboot' and
'znetbootrd' targets so that they work again (If you would prefer things
in a different format, please let me know). Thanks:
- Update the comments to reflect how things work with the correct
usages now.
- Fix the znetboot / znetbootrd targets. We now always set end-y,
and use this to figure out what image will be tftpboot'ed.
===== arch/ppc/boot/simple/Makefile 1.24 vs edited =====
--- 1.24/arch/ppc/boot/simple/Makefile Tue Dec 23 10:00:06 2003
+++ edited/arch/ppc/boot/simple/Makefile Tue Dec 23 10:01:04 2003
@@ -4,30 +4,38 @@
# Author: Tom Rini <trini@xxxxxxxxxx>
#
# Notes:
-# (1) For machine targets which produce more than one image, define
-# ZNETBOOT and ZNETBOOTRD to the image which should be available for
-# 'znetboot' and 'znetboot.initrd`
-# (2) Also, for machine targets which just need to remove the ELF header,
-# define END to be the machine name you want in the image.
-# (3) For machine targets which use the mktree program, define END to be
-# the machine name you want in the image, and you can optionally set
-# ENTRYPOINT which the image should be loaded at. The optimal setting
-# for ENTRYPOINT is the link address.
+# (1) For machines that do not want to use the ELF image directly (including
+# stripping just the ELF header off), they must set the variables
+# zimage-$(CONFIG_MACHINE) and zimagerd-$(CONFIG_MACHINE) to the target
+# that produces the desired image and they must set end-$(CONFIG_MACHINE)
+# to what will be suffixed to the image filename.
+# (2) Regardless of (1), to have the resulting image be something other
+# than 'zImage.elf', set end-$(CONFIG_MACHINE) to be the suffix used for
+# the zImage, znetboot, and znetbootrd targets.
+# (3) For machine targets which use the mktree program, you can optionally
+# set entrypoint-$(CONFIG_MACHINE) to the location which the image should be
+# loaded at. The optimal setting for entrypoint-$(CONFIG_MACHINE) is the link
+# address.
# (4) It is advisable to pass in the memory size using BI_MEMSIZE and
# get_mem_size(), which is memory controller dependent. Add in the correct
-# XXX_memory.o file for this to work, as well as editing the $(MISC) file.
-
+# XXX_memory.o file for this to work, as well as editing the
+# misc-$(CONFIG_MACHINE) variable.
boot := arch/ppc/boot
common := $(boot)/common
utils := $(boot)/utils
bootlib := $(boot)/lib
images := $(boot)/images
+tftpboot := /tftpboot
# Normally, we use the 'misc.c' file for decompress_kernel and
# whatnot. Sometimes we need to override this however.
misc-y := misc.o
+# Normally, we have our images end in .elf, but something we want to
+# change this.
+end-y := elf
+
# Additionally, we normally don't need to mess with the L2 / L3 caches
# if present on 'classic' PPC.
cacheflag-y := -DCLEAR_CACHES=""
@@ -41,35 +49,31 @@
zimage-$(CONFIG_IBM_OPENBIOS) := zImage-TREE
zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE
end-$(CONFIG_IBM_OPENBIOS) := treeboot
- tftpimage-$(CONFIG_IBM_OPENBIOS) := /tftpboot/zImage.$(end-y)
misc-$(CONFIG_IBM_OPENBIOS) := misc-embedded.o
- tftpimage-$(CONFIG_EMBEDDEDBOOT) := /tftpboot/zImage.embedded
+ end-$(CONFIG_EMBEDDEDBOOT) := embedded
misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o
zimage-$(CONFIG_EBONY) := zImage-TREE
zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
end-$(CONFIG_EBONY) := ebony
entrypoint-$(CONFIG_EBONY) := 0x01000000
- tftpimage-$(CONFIG_EBONY) := /tftpboot/zImage.$(end-y)
zimage-$(CONFIG_OCOTEA) := zImage-TREE
zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE
end-$(CONFIG_OCOTEA) := ocotea
entrypoint-$(CONFIG_OCOTEA) := 0x01000000
- tftpimage-$(CONFIG_OCOTEA) := /tftpboot/zImage.$(end-y)
extra.o-$(CONFIG_EV64260) := direct.o misc-ev64260.o
- tftpimage-$(CONFIG_EV64260) := /tftpboot/zImage.ev64260
+ end-$(CONFIG_EV64260) := ev64260
cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3)
zimage-$(CONFIG_GEMINI) := zImage-STRIPELF
zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF
end-$(CONFIG_GEMINI) := gemini
- tftpimage-$(CONFIG_GEMINI) := /tftpboot/zImage.$(end-y)
extra.o-$(CONFIG_K2) := legacy.o
- tftpimage-$(CONFIG_K2) := /tftpboot/zImage.k2
+ end-$(CONFIG_K2) := k2
cacheflag-$(CONFIG_K2) := -include $(clear_L2_L3)
# kconfig 'feature', only one of these will ever be 'y' at a time.
@@ -81,9 +85,7 @@
zimage-$(motorola) := zImage-PPLUS
zimageinitrd-$(motorola) := zImage.initrd-PPLUS
- tftpimage-$(motorola) := /tftpboot/zImage.pplus
- znetboot-$(motorola) := zImage.pplus
- znetbootrd-$(motorola) := zImage.initrd.pplus
+ end-$(motorola) := pplus
# Overrides previous assingment
extra.o-$(CONFIG_PPLUS) := legacy.o
@@ -92,10 +94,9 @@
zimageinitrd-$(pcore) := zImage.initrd-STRIPELF
extra.o-$(pcore) := chrpmap.o
end-$(pcore) := pcore
- tftpimage-$(pcore) := /tftpboot/zImage.$(end-y)
cacheflag-$(pcore) := -include $(clear_L2_L3)
- tftpimage-$(CONFIG_SANDPOINT) := /tftpboot/zImage.sandpoint
+ end-$(CONFIG_SANDPOINT) := sandpoint
cacheflag-$(CONFIG_SANDPOINT) := -include $(clear_L2_L3)
zimage-$(CONFIG_SPRUCE) := zImage-TREE
@@ -103,11 +104,9 @@
end-$(CONFIG_SPRUCE) := spruce
entrypoint-$(CONFIG_SPRUCE) := 0x00800000
misc-$(CONFIG_SPRUCE) := misc-spruce.o
- tftpimage-$(CONFIG_SPRUCE) := /tftpboot/zImage.$(end-y)
-
-# tftp image is prefixed with .smp if compiled for SMP
-tftpimage-$(CONFIG_SMP) += .smp
+# SMP images should have a '.smp' suffix.
+ end-$(CONFIG_SMP) += .smp
# This is a treeboot that needs init functions until the
# boot rom is sorted out (i.e. this is short lived)
@@ -181,18 +180,10 @@
rm -f $(obj)/zvmlinux.initrd
znetboot: zImage
-ifneq ($(ZNETBOOT),)
- cp $(images)/$(ZNETBOOT) $(tftpimage-y)
-else
- cp $(images)/zImage.* $(tftpimage-y)
-endif
+ cp $(images)/zImage.$(end-y) $(tftpboot)/zImage.$(end-y)
znetboot.initrd: zImage.initrd
-ifneq ($(znetbootrd-y),)
- cp $(images)/$(znetbootrd-y) $(tftpimage-y)
-else
- cp $(images)/zImage.* $(tftpimage-y)
-endif
+ cp $(images)/zImage.initrd.$(end-y) $(tftpboot)/zImage.initrd.$(end-y)
$(images)/zImage-STRIPELF: $(obj)/zvmlinux
dd if=$(obj)/zvmlinux of=$(images)/zImage.$(end-y) skip=64 bs=1k
--
Tom Rini
http://gate.crashing.org/~trini/
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@xxxxxxxxxx For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"aart@xxxxxxxxx";> aart@xxxxxxxxx </a>
|
