Re: Sharp GX20 Question

Hi Kim,

> As i remember, the MIDlet-Install-Notify has to be a valid
> url in regards of the gx10 security model. So if the game is
> downloaded from www.gx10.com, the install notify url must be
> on the same host. If not the installation will fail.

I tried that.. Changed the notify URL so it uses the same domain as the
JAR. No luck. Failed just the same was as before.

> (for serial transfers having a "fake" MIDlet-Jar-URL:
> http://www.myserver.com/myjar.jar and a corresponing install
> notify seems to do the trick)
>
> dont know if that helps.

Not this time, thanks anyway.

-Sam

>
>
> ----- Original Message -----
> From: "samnova" <sam@xxxxxxxxxxxxxxx>
> To: <KVM-INTEREST@xxxxxxxxxxxx>
> Sent: Thursday, September 18, 2003 5:13 PM
> Subject: Re: Sharp GX20 Question
>
>
> > Hi all,
> >
> > I did some tests using the last build from Ian Manders. These tests
> > was JUST for Sharp GX10. A few things:
> >
> > 1. Game is not tested downloading using a Vodafone
> subscription. But
> > with Swisscom. 2. Game is tested on a German GX10, no SIM
> lock at all.
> > 3. System.getProperty("microedition.platform") gives TQ-GX10
> > 4. System.getProperty("microedition.profiles") gives
> MIDP-1.0 VSCL-1.0.0
> > 5. Firmware info : A02-002-0148-GX10   2002/10/23 12:15:18
> >
> > This is the JAD used (Url not correct of course).
> >
> > MIDlet-1: Moorhen, MHPS.png, Moorhen
> > MIDlet-Icon: MHPS.png
> > MIDlet-Description: Moorhen
> > MIDlet-Jar-URL: dot.com/Moorhen_GX10_FG.jad
> > MIDlet-Name: Moorhen
> > MIDlet-Vendor: Mobile Scope AG
> > MIDlet-Data-Size: 1024
> > MIDlet-Network: N
> > MIDxlet-API: VSCL-1.0.1
> > Midlet-Install-Notify: http://www.vodafone.net
> > MIDlet-Jar-Size: 70044
> > MIDlet-Version: 2.01
> >
> > This failed right away (not showing the info about the game) with a
> > Download terminated. Permission Denied.
> >
> > Changed VSCL to MIDxlet-API: VSCL-1.0.0
> >
> > Failed right away: Download terminated. Connection Failed.
> >
> > MIDxlet-API: VSCL-1.0.0 + VSCL-1.0.1
> >
> > Failed right away: Download terminated. Connection Failed.
> >
> > Removed MIDxlet-API: VSCL-1.0.1
> > Worked without problems.
> >
> > Ian, could you please try these steps also on GX20.
> >
> > Any comments from anyone is VERY welcome. If we have to do a GX10
> > build then fine, as long as we also can do a GX20 build :) Does not
> > have to run on both phones really.
> >
> > Best Regards,
> >
> > Sam Nova
> >
> > > -----Original Message-----
> > > From: A mailing list for KVM discussion
> > > [mailto:KVM-INTEREST@xxxxxxxxxxxx] On Behalf Of Ian Manders
> > > Sent: Thursday, September 18, 2003 11:50 AM
> > > To: KVM-INTEREST@xxxxxxxxxxxx
> > > Subject: Re: Sharp GX20 Question
> > >
> > >
> > > Yeah, that's already in there. Still waiting to hear if
> it's worked
> > > though.
> > >
> > > Cheers
> > >
> > > Ian
> > >
> > > -----Original Message-----
> > > From: A mailing list for KVM discussion
> > > [mailto:KVM-INTEREST@xxxxxxxxxxxx]On Behalf Of Kim Daniel Arthur
> > > Sent: 18 September 2003 10:46
> > > To: KVM-INTEREST@xxxxxxxxxxxx
> > > Subject: Re: Sharp GX20 Question
> > >
> > >
> > > Remeber you will need the MIDlet-Install-Notify aswell if you
> > > include the MIDxlet-API attribgute, else it will fail.
> > >
> > > as said yesterday,
> > > for gx10 use 1.0.1, and gx20 you can use either, although for
> > > submission to vodafone 1.1.0 is stated as required in the spec.
> > >
> > > ----- Original Message -----
> > > From: "Ian Manders" <ian@xxxxxxxxxxxxxxxxxx>
> > > To: <KVM-INTEREST@xxxxxxxxxxxx>
> > > Sent: Wednesday, September 17, 2003 7:57 PM
> > > Subject: Re: Sharp GX20 Question
> > >
> > >
> > > > Apparently it refused to download the midlet on the
> GX20 after I'd
> > > > put:
> > > >
> > > >         MIDxlet-API: VSCL-1.0.1
> > > >
> > > > in. I asked the guy testing it to try it again with:
> > > >
> > > >         MIDxlet-API: VSCL-1.1.0
> > > >
> > > > but have yet to hear back if that worked or not.
> > > >
> > > > However, I have read somewhere that you can do this:
> > > >
> > > >         MIDxlet-API: VSCL-1.0.1, VSCL-1.1.0
> > > >
> > > > So maybe that will sort it out?
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: A mailing list for KVM discussion
> > > > [mailto:KVM-INTEREST@xxxxxxxxxxxx]On Behalf Of Elliot Sumner
> > > > Sent: 17 September 2003 16:37
> > > > To: KVM-INTEREST@xxxxxxxxxxxx
> > > > Subject: Re: Sharp GX20 Question
> > > >
> > > >
> > > > It will probably fail to download, not tried it. However,
> > > using 1.0.1
> > > > will still work on the GX20.
> > > >
> > > > samnova wrote:
> > > >
> > > > >As Ian was saying, this is a GX10 game that should
> work on a GX20
> > > > >also !!! (I know as he is doing the game for us).
> > > > >
> > > > >So adding the MIDxlet-API: VSCL-1.1.0 will fail
> download on GX10,
> > > > >right ?
> > > > >
> > > > >(I think we did try this before.. Maybe not with 1.1.0 but
> > > 1.0.0 for
> > > > >GX10)
> > > > >
> > > > >-Sam
> > > > >
> > > > >
> > > > >
> > > > >>-----Original Message-----
> > > > >>From: A mailing list for KVM discussion
> > > > >>[mailto:KVM-INTEREST@xxxxxxxxxxxx] On Behalf Of Elliot Sumner
> > > > >>Sent: Wednesday, September 17, 2003 4:52 PM
> > > > >>To: KVM-INTEREST@xxxxxxxxxxxx
> > > > >>Subject: Re: Sharp GX20 Question
> > > > >>
> > > > >>
> > > > >>Putting:
> > > > >>
> > > > >>MIDxlet-API: VSCL-1.0.1
> > > > >>
> > > > >>will fail the vodafone QA criteria. (I presume this is for
> > > > >>Vodafone...) The value for the GX20 should be:
> > > > >>
> > > > >>MIDxlet-API: VSCL-1.1.0
> > > > >>Also you have to enter
> > > > >>MIDxlet-Network: Y
> > > > >>or
> > > > >>MIDxlet-Network: N
> > > > >>(depending on if your MIDlet needs network access)
> > > > >>
> > > > >>
> > > > >>I keep seeing questions on this list about
> Jar/Manifest fields
> > > > >>needed for different handsets/operators, It would be a
> > > good idea if
> > > > >>we could collate all the answers into a FAQ. I'm willing
> > > to help put
> > > > >>one together if people send me the info...
> > > > >>
> > > > >>
> > > > >>Ian Manders wrote:
> > > > >>
> > > > >>
> > > > >>
> > > > >>>Aha! I'll give that a go then - thanks!
> > > > >>>
> > > > >>>Ian
> > > > >>>
> > > > >>>-----Original Message-----
> > > > >>>From: A mailing list for KVM discussion
> > > > >>>[mailto:KVM-INTEREST@xxxxxxxxxxxx]On Behalf Of Kim Daniel
> > > > >>>Arthur
> > > > >>>Sent: 17 September 2003 15:34
> > > > >>>To: KVM-INTEREST@xxxxxxxxxxxx
> > > > >>>Subject: Re: Sharp GX20 Question
> > > > >>>
> > > > >>>
> > > > >>>you need to specity both these paramters in the jad:
> > > > >>>
> > > > >>>MIDxlet-API: VSCL-1.0.1
> > > > >>>Midlet-Install-Notify:
> > > > >>>http://a.valid.url.for.gx20.security-model
> > > > >>>
> > > > >>>both must be present else if fails
> > > > >>>
> > > > >>>you can also change the scale factor of the gx20 (which
> > > by default
> > > > >>>scales to
> > > > >>>120x130):
> > > > >>>MIDxlet-Application-Resolution: w,h
> > > > >>>
> > > > >>>kimd
> > > > >>>
> > > > >>>----- Original Message -----
> > > > >>>From: "Ian Manders" <ian@xxxxxxxxxxxxxxxxxx>
> > > > >>>To: <KVM-INTEREST@xxxxxxxxxxxx>
> > > > >>>Sent: Wednesday, September 17, 2003 12:46 PM
> > > > >>>Subject: Sharp GX20 Question
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>>Hi, has anyone here had any experience developing for the
> > > > >>>>
> > > > >>>>
> > > > >>Sharp GX20?
> > > > >>
> > > > >>
> > > > >>>>I've converted a game to the Sharp GX10 which works great,
> > > > >>>>
> > > > >>>>
> > > > >>and am now
> > > > >>
> > > > >>
> > > > >>>>
> > > > >>>>
> > > > >>>trying
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>>to get it working on the GX20. However, any
> DeviceControl or
> > > > >>>>MediaPlayer calls used stop the game working on the GX20 -
> > > > >>>>
> > > > >>>>
> > > > >>it displays
> > > > >>
> > > > >>
> > > > >>>>a
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>"Discontinued"
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>>message. I've tried the game under the emulator I have for
> > > > >>>>
> > > > >>>>
> > > > >>GX20 work
> > > > >>
> > > > >>
> > > > >>>>(I'm not sure of the version - but the emujava.exe file is
> > > > >>>>dated
> > > > >>>>22/04/2003)
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>and
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>>it gets as far as a DeviceControl or MediaPlayer call,
> > > > >>>>
> > > > >>>>
> > > > >>before throwing
> > > > >>
> > > > >>
> > > > >>>>up
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>an
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>>ALERT and exiting.
> > > > >>>>
> > > > >>>>In the case of using the following code:
> > > > >>>>
> > > > >>>>
> > > > >>>>{
> > > > >>>>       DeviceControl dc;
> > > > >>>>
> > > > >>>>       try
> > > > >>>>       {
> > > > >>>>               dc = DeviceControl.getDefaultDeviceControl();
> > > > >>>>
> > > dc.setDeviceActive(DeviceControl.BACK_LIGHT, true);
> > > > >>>>       } catch (Exception e) { System.out.println("DC
> > > > >>>>
> > > > >>>>
> > > > >>error: " + e);
> > > > >>
> > > > >>
> > > > >>>>} }
> > > > >>>>
> > > > >>>>
> > > > >>>>it comes up with the following within the emulator:
> > > > >>>>
> > > > >>>>ALERT: Class
> com/vodafone/v10/system/device/DeviceControl is
> > > > >>>>restricted to access. kvm_main return code = 123
> > > > >>>>----- APP jkVmStopped callback begin.
> > > > >>>>VM callback: appId = 1, event = jkVmStopped
> > > > >>>>----- APP jkVmStopped callback end.
> > > AMstartMidpApplication return
> > > > >>>>code = -1 finish WINSOCK success.
> > > > >>>>
> > > > >>>>So even with the try-catch it is being stopped in both the
> > > > >>>>
> > > > >>>>
> > > > >>phone and
> > > > >>
> > > > >>
> > > > >>>>the emulator. This is the case for vibration and
> > > > >>>>
> > > > >>>>
> > > > >>MediaPlayer methods
> > > > >>
> > > > >>
> > > > >>>>as well.
> > > > >>>>
> > > > >>>>Does anyone know of a way to use the DeviceControl
> > > calls safely?
> > > > >>>>Alternatively, am I using an old version of the GX20 class
> > > > >>>>librarys (same date as the emulator - 22/04)?
> > > > >>>>
> > > > >>>>Cheers,
> > > > >>>>
> > > > >>>>Ian Manders
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>=============================================================
> > > > >>>
> > > > >>>
> > > > >>==========
> > > > >>
> > > > >>
> > > > >>>====
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>>To unsubscribe, send email to listserv@xxxxxxxxxxxx and
> > > > >>>>
> > > > >>>>
> > > > >>include in the
> > > > >>
> > > > >>
> > > > >>>>
> > > > >>>>
> > > > >>>body
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>>of the message "signoff KVM-INTEREST".  For general help,
> > > > >>>>
> > > > >>>>
> > > > >>send email
> > > > >>
> > > > >>
> > > > >>>>to listserv@xxxxxxxxxxxx and include in the body of the
> > > > >>>>message "help".
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>>
> > > > >>>=============================================================
> > > > >>>
> > > > >>>
> > > > >>==========
> > > > >>
> > > > >>
> > > > >>>====
> > > > >>>To unsubscribe, send email to listserv@xxxxxxxxxxxx and
> > > > >>>
> > > > >>>
> > > > >>include in the body
> > > > >>
> > > > >>
> > > > >>>of the message "signoff KVM-INTEREST".  For general help,
> > > > >>>
> > > > >>>
> > > > >>send email to
> > > > >>
> > > > >>
> > > > >>>listserv@xxxxxxxxxxxx and include in the body of the message
> > > > >>>"help".
> > > > >>>
> > > > >>>=============================================================
> > > > >>>
> > > > >>>
> > > > >>==========
> > > > >>
> > > > >>
> > > > >>>====
> > > > >>>To unsubscribe, send email to listserv@xxxxxxxxxxxx and
> > > > >>>
> > > > >>>
> > > > >>include in the body
> > > > >>
> > > > >>
> > > > >>>of the message "signoff KVM-INTEREST".  For general help,
> > > > >>>
> > > > >>>
> > > > >>send email to
> > > > >>
> > > > >>
> > > > >>>listserv@xxxxxxxxxxxx and include in the body of the message
> > > > >>>"help".
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>>
> > > > >>==============================================================
> > > > >>=============
> > > > >>To unsubscribe, send email to listserv@xxxxxxxxxxxx and
> > > include in
> > > > >>the body of the message "signoff KVM-INTEREST". For general
> > > > >>help, send email to listserv@xxxxxxxxxxxx and include in the
> > > body of the
> > > > >>message "help".
> > > > >>
> > > > >>
> > > > >>
> > > > >
> > > >
> > > >=============================================================
> > > ==========
> > > >====
> > > > >To unsubscribe, send email to listserv@xxxxxxxxxxxx
> and include
> > > > >in the
> > > body
> > > > >of the message "signoff KVM-INTEREST".  For general help,
> > > send email
> > > > >to listserv@xxxxxxxxxxxx and include in the body of
> the message
> > > > >"help".
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > ==============================================================
> > > =============
> > > > To unsubscribe, send email to listserv@xxxxxxxxxxxx and
> > > include in the
> > > body
> > > > of the message "signoff KVM-INTEREST".  For general help,
> > > send email
> > > > to listserv@xxxxxxxxxxxx and include in the body of the message
> > > > "help".
> > > >
> > > >
> > > ==============================================================
> > > =============
> > > > To unsubscribe, send email to listserv@xxxxxxxxxxxx and
> > > include in the
> > > body
> > > > of the message "signoff KVM-INTEREST".  For general help,
> > > send email
> > > > to listserv@xxxxxxxxxxxx and include in the body of the message
> > > > "help".
> > > >
> > >
> > > ==============================================================
> > > =============
> > > To unsubscribe, send email to listserv@xxxxxxxxxxxx and
> include in
> > > the body of the message "signoff KVM-INTEREST". For general help,
> > > send email to listserv@xxxxxxxxxxxx and include in the
> body of the
> > > message "help".
> > >
> > > ==============================================================
> > > =============
> > > To unsubscribe, send email to listserv@xxxxxxxxxxxx and
> include in
> > > the body of the message "signoff KVM-INTEREST". For general help,
> > > send email to listserv@xxxxxxxxxxxx and include in the
> body of the
> > > message "help".
> > >
> >
> >
> ==============================================================
> =============
> > To unsubscribe, send email to listserv@xxxxxxxxxxxx and
> include in the
> body
> > of the message "signoff KVM-INTEREST".  For general help,
> send email
> > to listserv@xxxxxxxxxxxx and include in the body of the message
> > "help".
> >
>
> ==============================================================
> =============
> To unsubscribe, send email to listserv@xxxxxxxxxxxx and
> include in the body of the message "signoff KVM-INTEREST".
> For general help, send email to listserv@xxxxxxxxxxxx and
> include in the body of the message "help".
>

===========================================================================
To unsubscribe, send email to listserv@xxxxxxxxxxxx and include in the body
of the message "signoff KVM-INTEREST".  For general help, send email to
listserv@xxxxxxxxxxxx and include in the body of the message "help".