On Tue, 2006-02-28 at 22:15 +0100, Miroslav Pragl wrote:
> > cat /proc/net/iet/volume and post here.
>
> #cat /proc/net/iet/volume
> tid:1 name:iqn.2001-04.com.example:storage.disk2.sys1.xyz
> lun:0 state:0 iotype:fileio path:/dev/sda
> lun:1 state:0 iotype:fileio path:/dev/loop0
looks fine
>
>
> > failed at which stage. 2 stages here, first one, discovery, enter ip
> > address and u will see target name iet exported. 2nd one, choose target
> > name and login, so which stage u are at?
>
> at the very first stage - just after entering ip/dns and port
have u use chap here?
>
>
> > how u make sure? ;)
> 1. telnet target 3260 works
> 2. selinux disabled
> 3. iptables stopped
sounds reasonable.
>
> and finally when I do service 'selinux-target stop' I get "connection
> failed"
>
> > not much log available in iet
>
> tried to start it manually in foreground - here's my log:
>
> # /usr/sbin/ietd -f -d 999999
> 1141160801.689307: can't create a target 17 0
>
> 1141160801.689371: can't create a target 17 0
17 is EEXIST
can u post u ietd.conf here?
>
> 1141160801.689399: creaing target
> iqn.2001-04.com.example:storage.disk2.sys1.xyz
>
> 1141160821.385533: connection closed <-- this one I got just when XP
> initiator failed, same message repeatswhen doing Targets-Refresh on XP
>
run "tcpdump -s1600 -wlog" and send us the log.
>
> BTW my target runs on DHCP, hope this doesn't matter
no
>
> Thanks a lot!
>
> Miroslav
>
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
|
