cat /proc/net/iet/volume and post here.
#cat /proc/net/iet/volume
tid:1 name:iqn.2001-04.com.example:storage.disk2.sys1.xyz
lun:0 state:0 iotype:fileio path:/dev/sda
lun:1 state:0 iotype:fileio path:/dev/loop0
failed at which stage. 2 stages here, first one, discovery, enter ip
address and u will see target name iet exported. 2nd one, choose target
name and login, so which stage u are at?
at the very first stage - just after entering ip/dns and port
how u make sure? ;)
1. telnet target 3260 works
2. selinux disabled
3. iptables stopped
and finally when I do service 'selinux-target stop' I get "connection
failed"
not much log available in iet
tried to start it manually in foreground - here's my log:
# /usr/sbin/ietd -f -d 999999
1141160801.689307: can't create a target 17 0
1141160801.689371: can't create a target 17 0
1141160801.689399: creaing target
iqn.2001-04.com.example:storage.disk2.sys1.xyz
1141160821.385533: connection closed <-- this one I got just when XP
initiator failed, same message repeatswhen doing Targets-Refresh on XP
BTW my target runs on DHCP, hope this doesn't matter
Thanks a lot!
Miroslav
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
| 