I bought new Maxtor HD 80 GB but something doesn't work on Fedora Core 3
because it gives this message:
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: Error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: Error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
.
.
.
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: Error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ide0: reset: success
Kernel panic - not syncing: mm/mmap.c:534: spin_lock(mm/rmap.c:cb80cf08)
already locked by <NULL>/0. (Not tainted)
[c0120445] panic+0x42/0x1c0
[c015e1e1] vma_prio_tree_insert+017/0x2a
[c01656d3] vma_adjust+0x322/0x556
[c0166f30] split_vma+0xdd/0xf5
[c0167c70] mprotect_fixup+0xf1/0x1ca
[c0167edb] sys_mprotect+0192/0x253
[c010392d] syscall_call+0x7/0xb
This problem occurs in a variable time after boot.
After few hours that pc is turned off.
I already used 80-wire cable and my Maxtor HD plugs are seated properly.
I'm using Kernel 2.6.12-1.1372 on Fedora Core 3
HD is 80 GB Maxtor ATA/133
With hdparm command I can see hda is set in "udma5".
How can I solve it ?
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
| 