|
|
June 28, 2005
- libata and hotplug status, Jim Ramsay
- Re: Organized summary of the pacthes, Alan Cox
- [git patches] 2.6.x libata updates, Jeff Garzik
- Re: Organized summary of the pacthes, Jeff Garzik
- Adobe+macromedia+OS etc all in CD under $99, Pen
- Re: [PATCH 2/2] libata-2.6: Ignore interrupt before the ATAPI CDB is sent to the device, Albert Lee
- Ide-Driver slowdown, Al Boldi
- Re: [patch] ide dma blacklist toshiba, Jens Axboe
- Re: [patch] ide dma blacklist toshiba, Jens Axboe
- Re: [patch] ide dma blacklist toshiba, maximilian attems
- Re: Kernel BUG report, Eric Sandeen
- Re: siimage card causes repeated oopses and panics on a PowerMac G4 running 2.6.12.1, Steven Schlansker
- Re: [PATCH] libata-dev-2.6-ncq: ahci: remove ata_port_start/stop() calls, Jeff Garzik
- Re: [PATCH] libata-dev-2.6-ncq: lengthen COMMRESET delay, Jeff Garzik
- Re: [patch] ide dma blacklist toshiba, Jeff Garzik
- Re: [PATCH 2/2] libata-2.6: Ignore interrupt before the ATAPI CDB is sent to the device, Jeff Garzik
June 27, 2005
- Re: Kernel BUG report, Eric Sandeen
- Re: USB ohci vs ehci, Jim Ramsay
- USB ohci vs ehci, Jim Ramsay
- Your electronics shopping alternative., Carrie
- Re: SATA speed. Should be 150 or 133?, Mark Lord
- Re: SATA speed. Should be 150 or 133?, Mark Lord
- Do you want to know the secret of success in sexual life?, Gregory
- Re: New IDE driver for review, Bartlomiej Zolnierkiewicz
- RE: New IDE driver for review, Mikael Starvik
- Re: [PATCH Linux 2.6.12 00/09] NCQ: generic NCQ completion/error-handling, Jens Axboe
- Re: [PATCH] libata-dev-2.6-ncq: rewrite __ata_qc_complete, Tejun Heo
- Re: [PATCH] libata-dev-2.6-ncq: rewrite __ata_qc_complete, Jeff Garzik
- [git patch] 2.6.x libata fix, Jeff Garzik
- Re: siimage card causes repeated oopses and panics on a PowerMac G4 running 2.6.12.1, Jeff Garzik
- Re: [PATCH] libata-dev-2.6-ncq: rewrite __ata_qc_complete, Tejun Heo
- Re: [PATCH 1/2] libata: Fix race condition in ata_pio_task(), Albert Lee
- sata_sil driver crashes when not used as a module, Alexander Wigen
- Re: [PATCH] libata-dev-2.6-ncq: rewrite __ata_qc_complete, Albert Lee
- siimage card causes repeated oopses and panics on a PowerMac G4 running 2.6.12.1, Steven Schlansker
- Re: [PATCH] libata-dev-2.6-ncq: rewrite __ata_qc_complete, Jens Axboe
- Re: [patch] ide dma blacklist toshiba, Jens Axboe
- Re: [PATCH][2.6.11.12] amd74xx patch for new NVIDIA device IDs, Jeff Garzik
- Re: [PATCH][2.6.11.12] sata_nv.c patch for new NVIDIA device IDs, Jeff Garzik
- Re: Enabling MSI on SATAII150, Jeff Garzik
- Enabling MSI on SATAII150, Kallol Biswas
June 26, 2005
- Re: SATA speed. Should be 150 or 133?, Stefan Smietanowski
- [patch] libata dma blacklist toshiba cdrom drive, maximilian attems
- Re: [patch] ide dma blacklist toshiba, maximilian attems
- Re: [patch] ide dma blacklist toshiba, Jeff Garzik
- [patch] allow modular built of ide-pnp, maximilian attems
- Re: [PATCH] libata-dev-2.6-ncq: rewrite __ata_qc_complete, Jeff Garzik
- Re: [PATCH] libata-dev-2.6-ncq: ahci: remove ata_port_start/stop() calls, Jeff Garzik
- Re: [PATCH] libata-dev-2.6-ncq: do ata_qc_new inside host_set lock, Jeff Garzik
- Re: [PATCH] libata-dev-2.6-ncq: remove qc->tag, Jeff Garzik
- Re: [PATCH] libata-dev-2.6-ncq: lengthen COMMRESET delay, Jeff Garzik
- Re: SATA speed. Should be 150 or 133?, Jeff Garzik
- [patch 8/13] ide hotplug mark __devinit opti621.c, maximilian attems
- [patch 6/13] ide hotplug mark __devinit it8172.c, maximilian attems
- [patch 5/13] ide hotplug mark __devinit cy82c693.c, maximilian attems
- [patch 3/13] ide hotplug mark __devinit cmd640.c, maximilian attems
- [patch 2/13] ide hotplug mark __devinit amd74xx.c, maximilian attems
- [patch 1/13] ide hotplug mark __devinit alim15x3.c, maximilian attems
- [patch 4/13] ide hotplug mark __devinit cs5530.c, maximilian attems
- [patch 7/13] ide hotplug mark __devinit ns87415.c, maximilian attems
- [patch 9/13] ide hotplug mark __devinit sc1200.c, maximilian attems
- [patch 10/13] ide hotplug mark __devinit sl82c105.c, maximilian attems
- [patch 11/13] ide hotplug mark __devinit slc90e66.c, maximilian attems
- [patch 12/13] ide hotplug mark __devinit triflex.c, maximilian attems
- [patch 13/13] ide hotplug mark __devinit via82cxxx.c, maximilian attems
- [patch] ide dma blacklist toshiba, maximilian attems
- Re: test logs, Tejun Heo
- Re: [PATCH Linux 2.6.12 09/09] NCQ: causes error or timeout, Tejun Heo
- Re: [PATCH Linux 2.6.12 08/09] NCQ: remove/unexport unused/unnecessary functions, Tejun Heo
- Re: [PATCH Linux 2.6.12 07/09] NCQ: stop dma before reset, Tejun Heo
- Re: [PATCH Linux 2.6.12 05/09] NCQ: implement NCQ helpers, Tejun Heo
- Re: [PATCH Linux 2.6.12 06/09] NCQ: convert ahci to use new NCQ helpers, Tejun Heo
- Re: [PATCH Linux 2.6.12 04/09] NCQ: export scsi_retry_command, Tejun Heo
- Re: [PATCH Linux 2.6.12 03/09] NCQ: add ap->sactive, Tejun Heo
- Re: [PATCH Linux 2.6.12 02/09] NCQ: add timeout to ata_read_log_page(), Tejun Heo
- Re: [PATCH Linux 2.6.12 01/09] NCQ: add ata_qc_complete_err() and @drv_err to functions, Tejun Heo
- [PATCH Linux 2.6.12 00/09] NCQ: generic NCQ completion/error-handling, Tejun Heo
- [PATCH] libata-dev-2.6-ncq: ahci: remove ata_port_start/stop() calls, Tejun Heo
- [PATCH] libata-dev-2.6-ncq: make tag 31 reserved for EH, Tejun Heo
- [PATCH] libata-dev-2.6-ncq: rewrite __ata_qc_complete, Tejun Heo
- [PATCH] libata-dev-2.6-ncq: do ata_qc_new inside host_set lock, Tejun Heo
- [PATCH] libata-dev-2.6-ncq: remove qc->tag, Tejun Heo
- [PATCH] libata-dev-2.6-ncq: lengthen COMMRESET delay, Tejun Heo
- Re: SATA speed. Should be 150 or 133?, Krzysztof Oledzki
- Re: SATA speed. Should be 150 or 133?, Jeff Garzik
- Male sexual enhancement formula, Jenny
- Re: SATA speed. Should be 150 or 133?, Krzysztof Oledzki
- Re: SATA speed. Should be 150 or 133?, Mark Lord
June 23, 2005
- SATA speed. Should be 150 or 133?, Krzysztof Oledzki
- [PATCH][2.6.11.12] sata_nv.c patch for new NVIDIA device IDs, Rob Punkunus
- Re: [PATCH][2.6.11.12] amd74xx patch for new NVIDIA device IDs, Jeff Garzik
- [PATCH][2.6.11.12] amd74xx patch for new NVIDIA device IDs, Rob Punkunus
- Re: unable to set udma >= 3 on ich5 on 2.6.11, Rafael Espíndola
- [PATCH 2/2] libata: Remove 'case ATA_PROT_ATAPI' in ata_host_intr(), Albert Lee
- Re: [PATCH 0/2] libata: PIO race condition fixes, Albert Lee
- [PATCH 0/2] libata: PIO race condition fixes, Albert Lee
- Re: [PATCH][2.4.31] amd74xx patch for new NVIDIA device IDs, Jeff Garzik
- Re: [PATCH][2.4.31] amd74xx patch for new NVIDIA device IDs, Greg KH
- Re: unable to set udma >= 3 on ich5 on 2.6.11, Balazs Ree
- Re: [SATA] libata-dev queue updated, Mark Lord
- [PATCH][2.4.31] amd74xx patch for new NVIDIA device IDs, Rob Punkunus
June 22, 2005
- Re: libata-dev queue, ATA passthru updated, Jeff Garzik
- Re: [SATA] libata-dev queue updated, Jeff Garzik
- Re: libata-dev queue, ATA passthru updated, Brett Russ
- libata-dev queue, ATA passthru updated, Jeff Garzik
- Kernel BUG report, Chris Spiegel
- Re: [SATA] libata-dev queue updated, Mark Lord
- Re: unable to set udma >= 3 on ich5 on 2.6.11, Rafael Ávila de Espíndola
June 20, 2005
- Re: unable to set udma >= 3 on ich5 on 2.6.11, Rafael Ávila de Espíndola
- [patch 3/6] Resend: drivers/ide/pci/cs5520.c fix return code value, domen
- [patch 4/6] drivers/ide/*: convert to pci_register_driver, domen
- [patch 5/6] drivers/ide/* - compile warning cleanup, domen
- [patch 6/6] [patch] MIN/MAX in ide-timing.h, domen
- Re: unable to set udma >= 3 on ich5 on 2.6.11, Bartlomiej Zolnierkiewicz
- Re: New IDE driver for review, Bartlomiej Zolnierkiewicz
- sata_sil, how i test my ST3160023AS for remove from sil_blacklist, Dmitry-T
- unable to set udma >= 3 on ich5 on 2.6.11, Rafael Espíndola
June 10, 2005
- [2.6.12-rc6][SATA] sil driver - K8N-E Deluxe hanging with Maxtor SATA disk, Shawn Starr
- Re: SMART support for libata, Greg Stark
- Re: Performance figure for sx8 driver, kallol
- Re: Performance figure for sx8 driver, kallol
- Re: [PATCH 2/4] libata: if condition fix for __atapi_pio_bytes(), Albert Lee
- Re: [PATCH 2/4] libata: if condition fix for __atapi_pio_bytes(), Bartlomiej Zolnierkiewicz
- [PATCH 4/4] libata: odd length data handling for __atapi_pio_bytes(), Albert Lee
- [PATCH 3/4] libata: trailing data handling fix for __atapi_pio_bytes(), Albert Lee
- [PATCH 2/4] libata: if condition fix for __atapi_pio_bytes(), Albert Lee
- Re: SMART support for libata, Jens Axboe
- Re: [PATCH 0/4] Resubmit ATAPI PIO mode fixes, Albert Lee
June 09, 2005
- Re: SMART support for libata, Greg Stark
- Re: SATA passthru (SMART), Krzysztof Oledzki
- Re: SMART support for libata, Mark Lord
- Re: New IDE driver for review, Bartlomiej Zolnierkiewicz
- Re: does AHCI work on intel 915 ICH6 controllers? Is it supposed to?, sean
- RE: New IDE driver for review, Mikael Starvik
- RE: New IDE driver for review, Mikael Starvik
- Re: New IDE driver for review, Bartlomiej Zolnierkiewicz
- Re: [PATCH] SATA NCQ #4, Grant Coady
- Re: [PATCH] SATA NCQ #4, Jens Axboe
- New IDE driver for review, Mikael Starvik
- Re: [PATCH 1/1] libata: Handle ATAPI interrupt before CDB is sent, Albert Lee
- Re: [PATCH] SATA NCQ #4, Jeff Garzik
- Re: [PATCH 2/4] if condition fix for __atapi_pio_bytes(), Bartlomiej Zolnierkiewicz
- Re: [PATCH] SATA NCQ #4, Jeff Garzik
- Re: [PATCH] SATA NCQ #4, Jens Axboe
- Re: [PATCH] SATA NCQ #4, Jens Axboe
- Re: Performance figure for sx8 driver, Jeff Garzik
- Re: [PATCH 2/4] if condition fix for __atapi_pio_bytes(), Albert Lee
- Re: SMART support for libata, Greg Stark
- Meet horny local girls, Candy
- Re: does AHCI work on intel 915 ICH6 controllers? Is it supposed to?, Jeff Garzik
June 08, 2005
- does AHCI work on intel 915 ICH6 controllers? Is it supposed to?, sean
- Re: [PATCH] SATA NCQ #4, Grant Coady
- Re: SMART support for libata, Mark Lord
- Re: SMART support for libata, Greg Stark
- Re: Re: sata_sil: Fix FIFO PCI Bus Arbitration KERNEL OOPS!, Sergio Navarro i Fajardo
- Re: [PATCH 2/4] if condition fix for __atapi_pio_bytes(), Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/4] if condition fix for __atapi_pio_bytes(), Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/1] libata: Handle ATAPI interrupt before CDB is sent, Albert Lee
- Re: [PATCH 2/4] if condition fix for __atapi_pio_bytes(), Albert Lee
- Re: [PATCH] SATA NCQ #4, Jens Axboe
- Re: [PATCH] SATA NCQ #4, Jens Axboe
- Re: [PATCH] SATA NCQ #4, Grant Coady
- Re: sata_sil: Fix FIFO PCI Bus Arbitration KERNEL OOPS!, Jens Axboe
- sata_sil: Fix FIFO PCI Bus Arbitration KERNEL OOPS!, Sergio Navarro i Fajardo
- [PATCH] SATA NCQ #4, Jens Axboe
- Re: [PATCH 1/1] libata: Handle ATAPI interrupt before CDB is sent, Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/4] if condition fix for __atapi_pio_bytes(), Bartlomiej Zolnierkiewicz
- [PATCH 1/1] libata: Handle ATAPI interrupt before CDB is sent, Albert Lee
- Re: [PATCH 2/4] if condition fix for __atapi_pio_bytes(), Albert Lee
June 07, 2005
- Re: [RFT, PATCH] sata_sil corruption / lockup fix, Shawn Starr
- Re: Samsung SP0822N does not go over UDMA 33 (2.6.11), Balazs Ree
- Help needed: is a sata_sil bug in 2.6.12-rc6 ??, Sergio Navarro i Fajardo
- Re: SATA passthru (SMART), Jeff Garzik
- Re: [SATA] libata-dev queue updated, Jeff Garzik
- Re: [SATA] libata-dev queue updated, Mark Lord
- Re: [SATA] libata-dev queue updated, Greg Stark
- Re: [SATA] libata-dev queue updated, Brad Campbell
- Re: [SATA] libata-dev queue updated, Mark Lord
- Re: [SATA] libata-dev queue updated, Mark Lord
- Re: [SATA] libata-dev queue updated, Mark Lord
- Re: [SATA] libata-dev queue updated, Brad Campbell
- Re: [SATA] libata-dev queue updated, Bene Martin
- Re: [SATA] libata-dev queue updated, Greg Stark
- Re: Samsung SP0822N does not go over UDMA 33 (2.6.11), Alban Browaeys
June 06, 2005
- Re: sata_promise driver and 2.6.11 on a MIPS board, Jim Ramsay
- Re: sata_promise driver and 2.6.11 on a MIPS board, Jeff Garzik
- sata_promise driver and 2.6.11 on a MIPS board, Jim Ramsay
- Re: [PATCH] libata: shelved ioctl-get-identity patch, Jeff Garzik
- Re: [SATA] libata-dev queue updated, Mark Lord
- Re: [PATCH] libata: shelved ioctl-get-identity patch, Mark Lord
- Re: [PATCH 4/4] odd length data handling for __atapi_pio_bytes(), Bartlomiej Zolnierkiewicz
- Re: [PATCH 3/4] trailing data handling fix for __atapi_pio_bytes(), Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/4] if condition fix for __atapi_pio_bytes(), Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/4] sg traverse fix for __atapi_pio_bytes(), Bartlomiej Zolnierkiewicz
- Re: Samsung SP0822N does not go over UDMA 33 (2.6.11), Balazs Ree
- [PATCH 4/4] odd length data handling for __atapi_pio_bytes(), Albert Lee
- [PATCH 3/4] trailing data handling fix for __atapi_pio_bytes(), Albert Lee
- [PATCH 2/4] if condition fix for __atapi_pio_bytes(), Albert Lee
- [PATCH 1/4] sg traverse fix for __atapi_pio_bytes(), Albert Lee
- [PATCH 0/4] Resubmit ATAPI PIO mode fixes, Albert Lee
June 01, 2005
- Re: sata_sil 0.9 experience, Bob Ramstad
- Re: Problem with concurrent SATA-Writes, Tobias Reinhard
- Re: sata_sil 0.9 experience, Kanniball
- sata_sil 0.9 experience, Bob Ramstad
- Re: Problem with concurrent SATA-Writes, Jeff Garzik
- Problem with concurrent SATA-Writes, Tobias Reinhard
- Re: [PATCH] PCI: amd74xx patch for new NVIDIA device IDs, Bartlomiej Zolnierkiewicz
- Re: [PATCH] PCI: amd74xx patch for new NVIDIA device IDs, Jeff Garzik
- Re: [PATCH] AHCI PCI MSI support, update 1, Jens Axboe
- Re: [PATCH] AHCI PCI MSI support, update 1, Jeff Garzik
- Re: [PATCH] AHCI PCI MSI support, update 1, Jens Axboe
- Congratulation, you got the gift certificate for $230, Mims
|
|