Re: AT100 Web server problems

Multiple reply!

-------------------

Kenny

Unfortunately it made no difference - worth a try tho'.

JohnB

------------------------

Konrad

I have tried what I think you meant and both other computers are now
registered as hosts with the AT100. I run Setup from each of the other
computers and forced a local search.

The XP computer now works correctly (not sure if that was the cure or I did
something else without realising it). Unfortunately the remaining 98SE still
does not work correctly and still insists I dial up the internet first.
Curiously I have a Boot Magic double boot system on the XP computer with yet
another 98SE as the alternative system. I tried that today and that insists
on dialling as well!! Don't you love computers!

Maybe I did not unbderstand fully what you meant. What is the hosts file
(name and location)?

JohnB


-----Original Message-----
From: Turtle Beach Audiotron User Forum
[mailto:AUDIOTRON@xxxxxxxxxxxxxxxxxxxx]On Behalf Of Automatic digest
processor
Sent: 11 March 2004 05:00
To: Recipients of AUDIOTRON digests
Subject: AUDIOTRON Digest - 9 Mar 2004 to 10 Mar 2004 (#2004-71)


------------------------------

Date:    Wed, 10 Mar 2004 00:52:20 -0800
From:    Kenny Briel <kdawg@xxxxxxxxxxxxxx>
Subject: Re: AT100 Web server problems

Try going to internet options, and to the connections tab, tell it to either
never dial, or dial when no network present, that might do the trick

KeNNy


------------------------------

Date:    Wed, 10 Mar 2004 11:23:24 +0100
From:    DW_PUB1 <pub1@xxxxxxxxx>
Subject: Re: AT100 Web server problems

Hello John,

maybe it helps to enter the Audiotron in the hosts file of the 2 other
systems.
(Audiotron name        IP address)

Best regards

Konrad A. Dinter

Dinter & Wolf GmbH --------------------------------------






-----Original Message-----

From: Turtle Beach Audiotron User Forum
[mailto:AUDIOTRON@xxxxxxxxxxxxxxxxxxxx] On Behalf Of John Bunting
Sent: Tuesday, March 09, 2004 10:33 PM
To: AUDIOTRON@xxxxxxxxxxxxxxxxxxxx
Subject: [AT] AT100 Web server problems

Help!!

I took delivery of my AT100 yesterday and after the odd hic-cup it is
working fine.

I am having problems using the AudioTron Web Server on my 10/100 ethernet.

I have 3 PCs, 2 running Win98SE and one XP Pro on my ethernet. I access the
internet by dialup, each PC having its own modem.

One 98SE (call it A) runs the WebServer to configure the AT100 without a
problem but with the other two systems, when I try to run the Web Server,
the internet dialup box pops up and insists that I dial up the internet
before it will run the Web Server. I cannot see any difference between the
settings on the two 98SEs never mind between 98SE (A) and the XP system.

Any suggestions where to look? I may have overlooked something very obvious!


JohnB

-----------------------------------------------------------
List archives:  http://maillist.voyetra.com/audiotron.html
You  may leave  the list  at any  time by  sending an e-mail
   to LISTSERV@xxxxxxxxxxxxxxxxxxxx with only the words
      "SIGNOFF AUDIOTRON" in the body of the e-mail.
         Separate Message Board available at:
    http://www.turtle-beach.com/wb/messageboard.htm
-----------------------------------------------------------