Re: RF in TINI

Suresh,

Of course its possible to interface any system to the tini as long as 
you meet the specifications of the tini. For example you will need an 
ADC and directional couplers at minimum to read forward and reverse 
power of your RF signal. You must design the interface circuitry that 
will sit between the tini and the RF lines so that you do not exceed 
tini's specifications.

As far as I can tell, tini is not intended to be the real-time 
controller for an embedded system, although depending on the response 
you require it may do well. You must specify in more detail your 
requirements so that list members can offer more detailed help though.

Sincerely, Jeff Biss

Suresh Purini wrote:

> Hi-
>
> I am new to TINI and embedded systems in general. Is it possible to have
> an RF network interface for TINI. I also want the embedded system to be
> powered by battery as i want to measure the power usage(working on some
> power aware protocols).
>
> Any help in this regard is well appreiciated.
>
> Thanks in Advance.
>
> Sincerely
> Suresh
>
>
> _______________________________________________
> TINI mailing list
> TINI-6tN4nzCoH/hBDgjK7y7TUQ@xxxxxxxxxxxxxxxx
> To UNSUBSCRIBE, edit your profile, or see list archives:
> http://lists.dalsemi.com/mailman/listinfo/tini


_______________________________________________
TINI mailing list
TINI-6tN4nzCoH/hBDgjK7y7TUQ@xxxxxxxxxxxxxxxx
To UNSUBSCRIBE, edit your profile, or see list archives:
http://lists.dalsemi.com/mailman/listinfo/tini