hardware.lirc (thread)

Re: Improved LIRC serial receiver circuit, eric partington
[Patch] Realloc call in lirc_client.c is one byte short, Amaya
- Re: [Patch] Realloc call in lirc_client.c is one byte short, Christoph Bartelmus
  - Re: [Patch] Realloc call in lirc_client.c is one byte short, Amaya
Error: "major number of /dev/lirc is 4", Vipin Jose
- Re: Error: "major number of /dev/lirc is 4", Michael Mauch
x10 remote - usb already in use?, Jan Willies
- Re: x10 remote - usb already in use?, Christoph Bartelmus
Looking for an USB remote, Antoine Vergos
- Re: Looking for an USB remote, EC
Lirc and Xine/VDR, RyoBerlin-Mmb7MZpHnFY@xxxxxxxxxxxxxxxx
LIRC ATI USB Remote Problems, bladah29 (sent by Nabble.com)
- Re: LIRC ATI USB Remote Problems, Paul Miller
  - Re: LIRC ATI USB Remote Problems, Jason Ellison
- Re: LIRC ATI USB Remote Problems, bladah29 (sent by Nabble.com)
Problem with the 0 key (DCT1700), Lee Veal
- Re: Problem with the 0 key (DCT1700), EC
  - Re: Problem with the 0 key (DCT1700), Lee Veal
Problem with the 0 key DCT1700, Lee Veal
Slow response from lirc in X-windows, Mike Marmar
O.7.2 fc3 irrecord raw mode problem, eric partington
homebrew remote stopped working, Baleno
Key Sending, Clay Barnes
Lirc_sir and verify_area(), m0sia
Have problems getting lirc to rework, tony
Unable to make Audigy 2 Plat work., Clay Barnes
- Re: Unable to make Audigy 2 Plat work., Stephen Beahm
  - Re: Unable to make Audigy 2 Plat work., Clay Barnes
- Re: Unable to make Audigy 2 Plat work., Clay Barnes
  - Re: Unable to make Audigy 2 Plat work., Duncan Webb
  - Re: Unable to make Audigy 2 Plat work., Duncan Webb
Searching config file for Medion MD1 NBC, Dirk Vornheder
[patch] pci_name() vs pci_pretty_name(), Mickaël Remars
- Re: [patch] pci_name() vs pci_pretty_name(), Christoph Bartelmus
  - Re: [patch] pci_name() vs pci_pretty_name(), Mickaël Remars
    - Re: [patch] pci_name() vs pci_pretty_name(), Christoph Bartelmus
nee usb based programmer, J.Bakshi
Pb to configure a remote, Antoine Vergos
LIRC and 2.6.15, Lars Fredriksson
[Patch] xirw, Giuliano A. Montecarlo
lirc on mandriva, MIlos Prudek
- Re: lirc on mandriva, EC
  - Re: lirc on mandriva, Giuliano A. Montecarlo
sending with Tira-2?, Michael Buro
- Re: sending with Tira-2?, Dely Nicolas
- Re: sending with Tira-2?, Michael Buro
Configure serial options - why?, Greg Bell
WinTV Nova-S-Plus, Giuliano Montecarlo
- Re: WinTV Nova-S-Plus, Mark Weaver
- Re: WinTV Nova-S-Plus, Giuliano A. Montecarlo
Permissions problem, Marty Ravell
Can lircmd.conf be made for any any Remote ?, egw63 egw63
Austar Digital STB Blaster codes, Tom Anderson
Asus s-presso p111, wim . zuidema-8LkvcxCLB6JmR6Xm/wNWPw
newbie setup of irblaster, sabruner3-ntQ8I44N4zM@xxxxxxxxxxxxxxxx
Problem with configure, JJ. DaNiMoTh
DVICO remote (Fusion 5 gold), Mark deJong
- RE: DVICO remote (Fusion 5 gold), Buzz
hauppauge pvr150 issue, dave sailer
- Re: hauppauge pvr150 issue, Greg Woods
Re: Streamzap not working lirc 0.7.2, Greg Woods
0.7.2 lircd.conf for a PVR-350, Marty Ravell
time between recieve and send, Stefan Carlsson
Question!, Dirk
LIRC serial help, MacNean Tyrrell
- Re: LIRC serial help, Michael Mauch
  - Re: LIRC serial help, MacNean Tyrrell
Dell Inspiron 9100, Derick Schmidt
Problem with one code for Motorola DCT700, Rob Scullion
mode2 spews, dave sailer
Pb with Pinnacle PCTV pro and Suse 9.3, petitchevalroux-GANU6spQydw
alsa_usb FAQ entry, Christoph Burger-Scheidlin
lirc and the desktop, tony
lirc-0.8.0pre1 feedback, Paul Bender
- Re: lirc-0.8.0pre1 feedback, Christoph Bartelmus
  - Re: lirc-0.8.0pre1 feedback, Paul Bender
    - Re: lirc-0.8.0pre1 feedback, Axel Thimm
    - Re: lirc-0.8.0pre1 feedback, Christoph Bartelmus
    - Re: lirc-0.8.0pre1 feedback, Axel Thimm
    - Re: lirc-0.8.0pre1 feedback, Christoph Bartelmus
Acer Travelmate 800 (NS chip), SUSE 10, lirc: no output, Sergey Udaltsov
Weird new error, Greg Bell
- Re: Weird new error, Christoph Bartelmus
  - Re: Weird new error, Greg Bell
    - Re: Weird new error, Christoph Bartelmus
    - Re: Weird new error, Greg Bell
actisys 200L and atilibusb, Tim Fenn
- Re: actisys 200L and atilibusb, Christoph Bartelmus
  - Re: actisys 200L and atilibusb, Tim Fenn
lirc_clientd / lirc-0.8.0pre1, Christoph Bartelmus
compiling lirc..., geo nik
- Re: compiling lirc..., EC
- compiling lirc..., geo nik
DVICO FusionHDTV DVB-T Plus "MCE" Remote Support, Kevin Tham
Not getting any devices, Richard Robinson
- Re: Not getting any devices, EC
Re: lirc-0.7.2, serial problem, Peter Schrammel
LIRC with 2.6.14 - 'Unknown symbol verify_area' in lirc_serial, Gavin Hamill
Pixelview PlayTVPro2 remote control support, Andrea Cimino
regarding the lirc install, srikrishna gudavalli
- Re: regarding the lirc install, J.Bakshi
lirc-0.7.1 serial home made receiver problem, egw63 egw63
Re: Hauppauge PVR-150 IR Blaster f, Tyler Bartel
- Re: Hauppauge PVR-150 IR Blaster f, Mark Weaver
  - Re: Hauppauge PVR-150 IR Blaster f, Tyler Bartel
    - Re: Hauppauge PVR-150 IR Blaster f, Mark Weaver
Is this IR receiver compatible with LIRC?, neochris (sent by Nabble.com)
Re: Complicated mode cycling, Laurence Darby
- Re: Complicated mode cycling, Greg Bell
- Re: Complicated mode cycling, EC
  - Re: Complicated mode cycling, Greg Bell
    - Re: Complicated mode cycling, EC
    - Re: Complicated mode cycling, EC
- Re: Complicated mode cycling, Ryan Voots