hardware.lirc (thread)
<
Prev Period
]
[
Next Period
>
PCTV remote
,
mmj75-IWqWACnzNjx/SzgSGea1oA
Help With CIMR100 Reciever
,
Jack Trout
Irman/Ira-3 and FC3
,
Ross Werner
Re: Irman/Ira-3 and FC3
,
Pete Stagman
LIRCs _serial driver and UART
,
Tom Gaudasinski
Re: LIRCs _serial driver and UART
,
Yann Vernier
Re: LIRCs _serial driver and UART
,
Tom Gaudasinski
Re: LIRCs _serial driver and UART
,
Tom Gaudasinski
Using two serial ports
,
Mark J. Small
Re: Using two serial ports
,
Mark J. Small
OT [kind of]: IR Module needed in Wpg
,
Craig Tataryn
dev/input on lirc 0.7.0
,
Adam Jacobvitz
DREAMBOX DM 7000-S remote control
,
Apostolos Moutiakas
LIRC/UDEV
,
Jan . Boon-lV02BMJlsR4AvxtiuMwx3w
Little Problem with atiusb from 0.7.0
,
Dirk Aust
Re: Little Problem with atiusb from 0.7.0
,
Michael Gold
Re: Little Problem with atiusb from 0.7.0
,
Paul Miller
various improvements for lirc
,
Arnaud Quette
Re: various improvements for lirc [key standardization]
,
Paul Miller
Re: various improvements for lirc [key standardization]
,
Arnaud Quette
Re: various improvements for lirc
,
Vojtech Pavlik
Re: various improvements for lirc
,
Christoph Bartelmus
Re: various improvements for lirc
,
Christoph Bartelmus
Upgraded lirc getting error 'could not reset tty caught signal'
,
Christian Bemervik
Problem with the igorplug driver
,
Costin Grigoras
Sasem Remote
,
Tim Davies
irw shows no output
,
Piotr Romanus
Re: irw shows no output
,
Jeff Simpson
Re: irw shows no output
,
Scott Weber
Re: irw shows no output
,
Piotr Romanus
irw shows no output
,
Piotr Romanus
Working Streamzap on 2.6.7 / FC2
,
Simon Wistow
Have to reload modules
,
Scott Weber
Lirc on debian and modules
,
Damian Minkov
Re: Lirc on debian and modules
,
Damian Minkov
lirc for winfast2000
,
Mark Mcknight
userland drivers
,
Jesse van den Kieboom
Re: userland drivers
,
Christoph Bartelmus
userland drivers
,
Jesse van den Kieboom
2 lirc instance, please help
,
Neil on Lirc
Re: 2 lirc instance, please help [SOLVED but...]
,
Neil on Lirc
Hauppage PVR-350 + LIRC + Debian == DEAD
,
Didde Brockman
Lirc Realmagic/Hollywood+ reciever/remote issue
,
Christian Bemervik
Re: Lirc Realmagic/Hollywood+ reciever/remote issue
,
Christoph Bartelmus
Re: Lirc Realmagic/Hollywood+ reciever/remote issue
,
Axel Thimm
USB-UIRT patch, when to be in LIRC cvs?
,
Shad Nelson
Re: USB-UIRT patch, when to be in LIRC cvs?
,
Christoph Bartelmus
Compro VideoMate PVR Support?
,
Michael Shoup
lirc-0.7.1pre1
,
Christoph Bartelmus
Re: lirc-0.7.1pre1
,
Neil on Lirc
Re: lirc-0.7.1pre1
,
tony
Re: lirc-0.7.1pre1
,
Didde Brockman
FC3, lirc 0.7.0 using RPM, Leadtek TV200XP TV card, keys not recognised
,
Zlatko
Re: FC3, lirc 0.7.0 using RPM, Leadtek TV200XP TV card, keys not recognised
,
Christoph Bartelmus
RE: FC3, lirc 0.7.0 using RPM, Leadtek TV2000XP TV card, keys not recognised
,
Zlatko
Hauppage PVR-350, Debian, LIRC: Not responding
,
Didde Brockman
RE: fedora core2: could not open /dev/lirc: error inserting lirc_gpio
,
Popat, Mrukant
Compile problems
,
Scott Weber
suggestions please
,
Neil on Lirc
Re: suggestions please
,
Neil on Lirc
fedora core2: could not open /dev/lirc
,
Popat, Mrukant
Re: fedora core2: could not open /dev/lirc
,
Neil on Lirc
fedora core2: could not open /dev/lirc
,
Popat, Mrukant
Re: fedora core2: could not open /dev/lirc
,
Axel Thimm
RE: fedora core2: could not open /dev/lirc
,
Zlatko
change sensitivity of buttons
,
rupert t
Re: change sensitivity of buttons
,
Andreas Seltenreich
Re: change sensitivity of buttons
,
rupert t
Re: change sensitivity of buttons
,
Joel Ebel
Re: change sensitivity of buttons
,
rupert t
Re: change sensitivity of buttons
,
Andreas Seltenreich
Re: change sensitivity of buttons
,
dcmorgan-XkmvG1Wkh0dBDgjK7y7TUQ
Re: change sensitivity of buttons
,
Joel Ebel
Re: change sensitivity of buttons
,
dcmorgan-XkmvG1Wkh0dBDgjK7y7TUQ
Re: change sensitivity of buttons
,
Joel Ebel
RE: Help: PRV250 Unhappyness
,
espnleo linux
Compro VideoMate PVR IR Support?
,
Michael Shoup
Configuring lircmd
,
krishna
make problems....
,
Justin Nye
Re: make problems....
,
Amaya
External Tuner (SA1850) and Actisys-200L?
,
David Cheng
Re: External Tuner (SA1850) and Actisys-200L?
,
Michael Libeskind
Re: External Tuner (SA1850) and Actisys-200L?
,
David Cheng
Re: External Tuner (SA1850) and Actisys-200L?
,
Karl Bongers
Re: External Tuner (SA1850) and Actisys-200L?
,
David Cheng
Re: External Tuner (SA1850) and Actisys-200L?
,
Michael Libeskind
lirc and 2.6.10 kernel
,
Alvaro Garriga
Re: lirc and 2.6.10 kernel
,
Alvaro Garriga
Re: lirc and 2.6.10 kernel
,
Alvaro Garriga
How to identify a new remote control?
,
Sim
Re: How to identify a new remote control?
,
Karl Bongers
Re: How to identify a new remote control?
,
Sim
Re: How to identify a new remote control?
,
Karl Bongers
Re: How to identify a new remote control?
,
Karl Bongers
Problems with a haupauge 'WinTV Go Plus' remote
,
Adam Holbrook
IR transmitter probs?
,
Piers Kittel
Re: IR transmitter probs?
,
Piers Kittel
Re: IR transmitter probs?
,
Piers Kittel
Re: IR transmitter probs?
,
Bernd Oefinger
Re: IR transmitter probs?
,
Piers Kittel
Hacking separate serial transitter and receiver into a single unit?
,
Nick Morrott
Re: Hacking separate serial transitter and receiver into a single unit?
,
Mike
Is CVS missing setup-driver.sh and configure files?
,
Nick Morrott
Re: Is CVS missing setup-driver.sh and configure files?
,
Andreas Seltenreich
Re: Is CVS missing setup-driver.sh and configure files?
,
Nick Morrott
Re: Is CVS missing setup-driver.sh and configure files?
,
Amaya
Lirc_i2c seems to be wrong version for kernel
,
matthew dechant
is this a bug in lirc-7.0
,
Neil on Lirc
IRA-3/Voom Remote
,
Ross Biro
no output from mode2 with HP HSDL-3600
,
Eero Heino
no output from mode2 with HP HSDL-3600
,
Eero Heino
[PATCH] make hw_audio_alsa work with EMU10K1-based cards
,
Andreas Seltenreich
can somebody help me wiht Lirc[supported/use TV card] dilemma
,
Peter HLOSKA
LIRC for Infra red port
,
krishna
ir receiver and transmitter
,
Neil on Lirc
Re: ir receiver and transmitter[UPDATE]
,
Neil on Lirc
Re: ir receiver and transmitter[UPDATE]
,
Neil on Lirc
Sleep-inside-spinlock check on kernel 2.6.10
,
Daniel Sobe
Sleep-inside-spinlock check on kernel 2.6.10
,
Daniel Sobe
Fedora Core 3 lirc hell
,
tony
Re: Fedora Core 3 lirc hell
,
tony
Re: Fedora Core 3 lirc hell
,
tony
Keyspan remote w/LIRC?
,
Robert La Ferla
resend - Using multiple devices -help needed again
,
Pete Stagman
Using multiple devices -help needed again
,
Pete Stagman
Re: Using multiple devices -help needed again
,
Christoph Bartelmus
(no subject)
,
Jesse van den Kieboom
Streamzap on lirc 0.7.0 and kernel 2.6.8
,
Tony Howard
Re: bluetooth in lirc
,
Dan Isla
Hauppauge Nova-T /dev/input/eventX double press problem
,
Tony Houghton
Re: Hauppauge Nova-T /dev/input/eventX double press problem
,
Tony Houghton
Re: Hauppauge Nova-T /dev/input/eventX double press problem
,
Tony Houghton
Re: Hauppauge Nova-T /dev/input/eventX double press problem
,
Christoph Bartelmus
Re: Hauppauge Nova-T /dev/input/eventX double press problem
,
Tony Houghton
Re: Hauppauge Nova-T /dev/input/eventX double press problem
,
Gerd Knorr
Re: Hauppauge Nova-T /dev/input/eventX double press problem
,
Christoph Bartelmus
Re: Hauppauge Nova-T /dev/input/eventX double press problem
,
Tony Houghton
Re: Hauppauge Nova-T /dev/input/eventX double press problem
,
Gerd Knorr
Re: For those of you with the OLD MCE USB remote...
,
Benjamin Watkins
LIrc serial/parallel silence
,
Konstantin Melikhov
Re: LIrc serial/parallel silence
,
Christoph Bartelmus
Re[2]: LIrc serial/parallel silence
,
Konstantin Melikhov
problem with 'make'
,
Jon Morris
Re: problem with 'make'
,
Armijn Hemel
Lirc configuring with Hauppauge PVR350 remote
,
Bjoern Ove Johnsen
Re: Lirc configuring with Hauppauge PVR350 remote
,
Rob Greene
Problems getting irxevent working with Streamzap
,
Simon Wistow
ir-receiver for USB
,
Peter Bossy
libirman, lirc, inconsistent codes
,
dave sailer
Segfault on lirc device node for any io
,
Konstantin Melikhov
WARNING: Error inserting ledxmit_dev
,
pete
Re: WARNING: Error inserting ledxmit_dev
,
Christoph Bartelmus
Re: WARNING: Error inserting ledxmit_dev
,
pete
Configuring LIRC for 2 different devices WAS - Re: WARNING: Error inserting ledxmit_dev
,
pete
Re: Using multiple different devices simultaneously
,
pete
Re: Using multiple different devices simultaneously
,
Christoph Bartelmus
Re: Using multiple different devices simultaneously
,
pete
Re: Using multiple different devices simultaneously
,
Axel Thimm
Re: Using multiple different devices simultaneously
,
Christoph Bartelmus
Re: Using multiple different devices simultaneously
,
Axel Thimm
Kernel 2.6 and Leadtek WinFast TV 2000 remote
,
junaru
Did I kill my serial ports?
,
John Johnson
Lirc gets "Unknown symbol" on Vanilla 2.6.9
,
Colin Bell
Re: Lirc gets "Unknown symbol" on Vanilla 2.6.9
,
Alien
2.6.10 and ´make install´ fails
,
Christopher Robbins
Re: Recommend a homebrew parallel port receiver?
,
Stian Davidsen
infrared receiver ic
,
Neil on Lirc
Re: infrared receiver ic
,
Neil on Lirc
Re: infrared receiver ic
,
Karl Bongers
Trying to compile
,
pete
installing lirc
,
Paul Houser
can't get mode2 to work with home-brew receiver
,
Jim Stuhlmacher
[patch] dont use make directly in configure
,
Amir Shalem
Re: [patch] dont use make directly in configure
,
Christoph Bartelmus
LIRC ledxmit ir blaster daemon dies
,
M . Barnabas Luntzel
Re: LIRC ledxmit ir blaster daemon dies
,
M . Barnabas Luntzel
Can't get my ati remote wonder to work
,
Daniel Eriksson
Re: Can't get my ati remote wonder to work
,
Christoph Bartelmus
Re: Can't get my ati remote wonder to work
,
Daniel Eriksson
Re: Can't get my ati remote wonder to work
,
Paul Miller
X10 MouseRemote support
,
Christoph Bartelmus
Re: X10 MouseRemote support
,
Michael Schatz
Re: X10 MouseRemote support
,
Christoph Bartelmus
Re: "bad envelope" with x10 MP3 remote
,
Christoph Bartelmus
Will this work with lirc?
,
Piers Kittel
Re: Will this work with lirc?
,
Christoph Bartelmus
Re: Will this work with lirc?
,
Piers Kittel
Re: Will this work with lirc?
,
Christoph Bartelmus
Re: Will this work with lirc?
,
Piers Kittel
Re: Will this work with lirc?
,
Piers Kittel
Re: Will this work with lirc?
,
Yann Vernier
Re: Will this work with lirc?
,
Piers Kittel
Re: Will this work with lirc?
,
Yann Vernier
Compile on different box?
,
Alan Dayley
Re: Compile on different box?
,
Michael Mauch
Re: Compile on different box?
,
Alan Dayley
<
Prev Period
]
[
Next Period
>
News
|
FAQ
|
advertise
