hardware.lirc (thread)

each client connect requires rmmod and re modprobe?, malcolm
Compile error, bylzz
one Hauppauge remote and two Hauppauge 250/350 capture cards, marcel marcel
USB remote receiver and transmiter, Mitko Haralanov
- RE: USB remote receiver and transmiter, Dan Conti
- USB remote receiver and transmiter, Mitko Haralanov
PNA4602M Trouble, David A. Greene
compile errors - 2.6.4, malcolm
- RE: compile errors - 2.6.4, Pearless
  - Re: compile errors - 2.6.4, Anthony Arobone
  - Re: compile errors - 2.6.4, malcolm
  - Re: compile errors - 2.6.4, Anthony Arobone
- Re: compile errors - 2.6.4, Eduardo J. Ortega
- compile errors - 2.6.4, malcolm
Redhat 9 and Dell8100, Timothy Johnson
- Re: Redhat 9 and Dell8100, Eduardo J. Ortega
2.6 support, Christoph Bartelmus
- Re: 2.6 support, Flameeyes
- RE: 2.6 support, Pearless
  - Re: 2.6 support, Christoph Bartelmus
    - Re: 2.6 support, Shaul Kedem
    - RE: 2.6 support, Pearless
    - Re: 2.6 support, Eduardo J. Ortega
Code capture on serial receiver, Bill Bradford
using Sitecom CN-100 with LIRC?, Armijn Hemel
Lirc Configure Problem, Steve
Kernel panic with lirc_serial and solution, Christian Schneider
Pixelview PlayTV Pro PV-878P+(Rev.9F), marianciuc
lirc-0.7.0pre4, Christoph Bartelmus
lirc and kernel 2.6.4 with pixelview tvcard remote, Michael B
Motherboard Header problems., Ian Nicholls
compile problems under 2.6.3, Eduardo J. Ortega U.
Analog Cable Decoders, Rafael Rangel
- Re: Analog Cable Decoders, Scott Baily
  - Re: [WinLIRC] Re: Analog Cable Decoders, Rafael Rangel
    - Re: [WinLIRC] Re: Analog Cable Decoders, Jon Quiros
    - Re: [WinLIRC] Re: Analog Cable Decoders, Rafael Rangel
  - Re: [WinLIRC] Re: Analog Cable Decoders, Scott Baily
Adding support for FLYVIDEO 3000 to LIRC, Pearless
- Re: Adding support for FLYVIDEO 3000 to LIRC, Flameeyes
- Re: Adding support for FLYVIDEO 3000 to LIRC, Stefan Lange
  - Re: Adding support for FLYVIDEO 3000 to LIRC, Stefan Lange
    - RE: Adding support for FLYVIDEO 3000 to LIRC, Pearless
    - Re: Adding support for FLYVIDEO 3000 to LIRC, Stefan Lange
    - Re: Adding support for FLYVIDEO 3000 to LIRC, Gerd Knorr
    - RE: Adding support for FLYVIDEO 3000 to LIRC, Pearless
    - RE: Adding support for FLYVIDEO 3000 to LIRC, Pearless
    - RE: Adding support for FLYVIDEO 3000 to LIRC, Pearless
    - Re: Adding support for FLYVIDEO 3000 to LIRC, Shaul Kedem
    - Re: Adding support for FLYVIDEO 3000 to LIRC, Stefan Lange
    - Re: Adding support for FLYVIDEO 3000 to LIRC, Shaul Kedem
    - Re: Adding support for FLYVIDEO 3000 to LIRC, Flameeyes
    - Re: Adding support for FLYVIDEO 3000 to LIRC, Shaul Kedem
    - Re: Adding support for FLYVIDEO 3000 to LIRC, Flameeyes
- Re: Adding support for FLYVIDEO 3000 to LIRC, Shaul Kedem
- RE: Adding support for FLYVIDEO 3000 to LIRC, Pearless
  - Re: Adding support for FLYVIDEO 3000 to LIRC, Stefan Lange
Status of input layer support, Flameeyes
- Re: Status of input layer support, Stefan Lange
- Re: Status of input layer support, Changwoo Ryu
  - Re: Status of input layer support, Tino Keitel
    - Re: Status of input layer support, Changwoo Ryu
Motherboard Header problems, Mythical
- Re: Motherboard Header problems, Karl Bongers
  - Re: Motherboard Header problems, Mythical
Help with UDEV, Flameeyes
- Re: Help with UDEV, Timo Boettcher
- Re: Help with UDEV, Jason Lunz
Desperate to get libirman working on 2.6.4, Brian Foddy
- Re: Desperate to get libirman working on 2.6.4, Brian Foddy
  - Re: Desperate to get libirman working on 2.6.4, Brian Foddy
    - Re: Desperate to get libirman working on 2.6.4, Christoph Bartelmus
Prob using LIRC and X10 Remote, Brian McCann
FW: Patching the kernel 2.6.4 for LIRC, Pearless
Kernel 2.6.4 + patches, SIR worked once, Tilman Dilo
- Re: Kernel 2.6.4 + patches, SIR worked once, Tatu Lahtela
  - Re: Kernel 2.6.4 + patches, SIR worked once, Tilman Dilo
    - Re: Kernel 2.6.4 + patches, SIR worked once, Flameeyes
Patching kernel 2.6.4 for LIRC, Pearless
- Re: Patching kernel 2.6.4 for LIRC, Flameeyes
  - RE: Patching kernel 2.6.4 for LIRC, Pearless
    - Re: Patching kernel 2.6.4 for LIRC, Flameeyes
    - RE: Patching kernel 2.6.4 for LIRC, Pearless
    - RE: Patching kernel 2.6.4 for LIRC - more information, Pearless
    - Re: Patching kernel 2.6.4 for LIRC - more information, Flameeyes
    - RE: Patching kernel 2.6.4 for LIRC - more information, Pearless
sending fake IR events to lircd from command line, Marc MERLIN
- Re: sending fake IR events to lircd from command line, Karl Bongers
  - Re: sending fake IR events to lircd from command line, Marc MERLIN
    - Re: sending fake IR events to lircd from command line, Karl Bongers
    - Re: sending fake IR events to lircd from command line, Marc MERLIN
    - Re: sending fake IR events to lircd -> documented, Marc MERLIN
flameeyes 2.6.3 patch compile error, Anthony Arobone
- Re: flameeyes 2.6.3 patch compile error, Flameeyes
- Re: flameeyes 2.6.3 patch compile error, Dimitris Michail
  - Re: flameeyes 2.6.3 patch compile error, Anthony Arobone
- flameeyes 2.6.3 patch compile error, Anthony Arobone
  - Re: flameeyes 2.6.3 patch compile error, Flameeyes
LIRC, newbie, please help me., marianciuc
- Re: LIRC, newbie, please help me., Joel Ebel
Can't compile lirc with Hauppauge-support, Martin Swientek
- Re: Can't compile lirc with Hauppauge-support [solved], Martin Swientek
./configure: line 1341: `AM_INIT_AUTOMAKE(lirc, 0.7.0pre1)', Carl Karsten
marmitek remote supported?, m . stolte-Y4mZ5+dzgICVMfmVM8N4CfP6llvjuJOh
Generic remotes, Yan Seiner
- Re: Generic remotes, Mikal Krogstad
need to restart lircd, greg
xmitter circuit question-- please please please help :-), Jon Quiros
- Re: xmitter circuit question-- please please please help :-), Jon Quiros
- Re: xmitter circuit question-- please please please help :-), Shaul Kedem
  - Re: xmitter circuit question-- please please please help :-), lirc
    - Re: xmitter circuit question-- please please please help :-), Shaul Kedem
    - Re: xmitter circuit question-- please please please help :-), Jon Quiros
    - Re: xmitter circuit question-- please please please help :-), Karl Bongers
    - Re: xmitter circuit question-- please please please help :-), Jon Quiros
.lirc-file for Lifesat LS2001, Serebii-Mmb7MZpHnFY
- .lirc-file for Lifesat LS2001, Serebii-Mmb7MZpHnFY
Radioshack IR Receiver Module Part #276-640, John Lamiet
Some problem with lirc hardware, Susan
- Re: Some problem with lirc hardware, Shaul Kedem
- Re: Some problem with lirc hardware, Tom Watson
alienware area-51m remote, Simon Cooper
Problem compiling CVS --automake issue, Greg Chila
Lirc for 2.6.4 - 20040318, Flameeyes
- Re: Lirc for 2.6.4 - 20040318, A. Dessalle
- RE: Lirc for 2.6.4 - 20040318, A. Dessalle
second update.. think fixed :), Craig Tinson
update, Craig Tinson
also..just to check.., Craig Tinson
avertv studio - no response..., Craig Tinson
Support for Haupauge WinTV Nova-T, Tino Keitel
- Re: Support for Haupauge WinTV Nova-T, Tino Keitel
Motorola dvi4000 codes - are very short pulses possible, Henk Hesselink
- Re: Motorola dvi4000 codes - are very short pulses possible, Christoph Bartelmus
- Motorola dvi4000 codes - are very short pulses possible, Henk Hesselink
Help with SA3250, Bill Bradley
RE: remote works once.. then stops.. (mceusb), Dan Conti
Re: IRDA, mick
remote works once.. then stops.., Craig Tinson
- Re: remote works once.. then stops.., Benjamin Watkins
- Re: remote works once.. then stops.., Ashley Bone
  - Re: remote works once.. then stops.., Craig Tinson
  - Re: remote works once.. then stops.., Christoph Bartelmus
    - Re: remote works once.. then stops.., Dan Conti
    - RE: remote works once.. then stops.., Dan Conti
    - Re: remote works once.. then stops.., Christoph Bartelmus
    - Help with SA3250, Bill Bradley
    - Re: remote works once.. then stops.., Ashley Bone
- RE: remote works once.. then stops.., Dan Conti
  - RE: remote works once.. then stops.., Benjamin Watkins
wrapper.h???, Raimund Eimann
- Re: wrapper.h???, Shaul Kedem
- re: wrapper.h???, Kyler Laird
finding a suitable IR diode for use with lirc (in Sydney, Australia), Ned
ATI USB remote, Jeff Mottishaw
- Re: ATI USB remote, Paul Miller
Will this compile on BeOS/Zeta, Karl vom Dorff
- Re: Will this compile on BeOS/Zeta, Stephan Budach
IR Query, shiva
lirc over network, matt hatfield
- Re: lirc over network, Christoph Bartelmus
RE: LIRC-list digest, Vol 1 #1567 - 2 msgs, karthik babu
Lirc not configuring properly, Josh Gant
- Re: Lirc not configuring properly, Christoph Bartelmus
connecting both receiver and transmitter to the same serial port., Ned
- Re: connecting both receiver and transmitter to the same serial port., Karl Bongers
- Re: connecting both receiver and transmitter to the same serial port., Ryan Chouinard
home brew missing sensivity., gislain
- Re: home brew missing sensivity., Karl Bongers
- Re: home brew missing sensivity., Tom Watson
  - Re: home brew missing sensivity., gislain
- Fwd: Re: home brew missing sensivity., gislain
remote trouble, Eitan Isaacson
- remote trouble, Eitan Isaacson
USB_UIRT support, James Armstrong
Parallel Port LIRC, Christian Mautner
lirc on 2.6 (flameeye's patches) and uDev, Alexander Zapatka
- Re: lirc on 2.6 (flameeye's patches) and uDev, Flameeyes
Tivo Series 2 Remote Update, John F. DeLuca
- Re: Tivo Series 2 Remote Update, John F. DeLuca
patch to lirc_serial for separate send and receive ports, Henk Hesselink
conf file for mPlayer and other stuff, Carl Karsten
using a home brew transmitter with lirc on gentoo, Shaul Kedem
- Re: using a home brew transmitter with lirc on gentoo, Christoph Bartelmus
  - Re: using a home brew transmitter with lirc on gentoo, Shaul Kedem
    - Re: using a home brew transmitter with lirc on gentoo, Christoph Bartelmus
    - Re: using a home brew transmitter with lirc on gentoo, Adrian Burden
    - Re: using a home brew transmitter with lirc on gentoo, Shaul Kedem
    - Can flyvideo2000 (saa7130 version) be used with lircd and irrecord?, Shaul Kedem
errors during make with 0.6.6, Steve Ennico
Problem with udp, Stephan Budach
- Re: Problem with udp, Carl Karsten
  - Re: Problem with udp, Stephan Budach
    - Re: Problem with udp, Carl Karsten
    - Re: Problem with udp, Stephan Budach
    - Re: Problem with udp, Stephan Budach
    - Re: Problem with udp, Christoph Bartelmus
    - Re: Problem with udp, Stephan Budach
    - Re: Problem with udp, Jim Paris
    - Re: Problem with udp, Stephan Budach
kernel 2.6 and flameeyes patches, Peter van Rensburg
- Re: kernel 2.6 and flameeyes patches, Flameeyes
- Re: kernel 2.6 and flameeyes patches, Peter van Rensburg
Tivo remote: DVR 1/2 switch, John F. DeLuca
- Re: Tivo remote: DVR 1/2 switch, Joel Ebel
- RE: Tivo remote: DVR 1/2 switch, Graham W. Mitchell
  - Re: Tivo remote: DVR 1/2 switch, Joel Ebel
IR keyboard, Ronald Pijnacker
- Re: IR keyboard, Eric Jorgensen
PageUP, page up, Page Up....., Paul Stavrides
- Re: PageUP, page up, Page Up....., Christoph Bartelmus
- Re: PageUP, page up, Page Up....., Lance Tost
  - Re: PageUP, page up, Page Up....., Paul Stavrides
xmms lirc plugin problems with xmms 1.2.10, Stefan
New Tira receiver not working, Daryl Sayers
- Re: New Tira receiver not working, Alex Zharov
  - Re: New Tira receiver not working, Daryl Sayers
Compile errors with latest 2.6.3 lirc patch and latest 2.6.3 kernel., A. P. Kennedy
- Re: Compile errors with latest 2.6.3 lirc patch and latest 2.6.3 kernel., Flameeyes
  - Re: Compile errors with latest 2.6.3 lirc patch and latest 2.6.3 kernel., A. P. Kennedy
    - Re: Compile errors with latest 2.6.3 lirc patch and latest 2.6.3 kernel., A. P. Kennedy
Lirc for 2.6.3 #3 - 20040303, Flameeyes
Experimental patch, Flameeyes
Re: Homebrew IR Transmitter Help, Bill Bradley
- Re: Homebrew IR Transmitter Help, Karl Bongers
  - Re: Homebrew IR Transmitter Help, Bill Bradley
startup script and config file, Carl Karsten
- Re: startup script and config file, Christoph Bartelmus
other remotes with Creative reciever, Carl Karsten
RCA DirectTV remote, Gabe Rubin
lirc-0.7.0pre3 problem with Hauppauge (fwd), Dan Conti
- Re: lirc-0.7.0pre3 problem with Hauppauge (fwd), Dan Conti
  - Re: lirc-0.7.0pre3 problem with Hauppauge (fwd), Axel Thimm
    - RE: lirc-0.7.0pre3 problem with Hauppauge (fwd), Dan Conti
    - Re: lirc-0.7.0pre3 problem with Hauppauge (fwd), Axel Thimm
    - RE: lirc-0.7.0pre3 problem with Hauppauge (fwd), Dan Conti
lircrc for mplayer, Carl Karsten
Re: lirc-0.7.0pre3 (was: [patch] updates for mceusb support), Axel Thimm
Connect Hauppauge IR Receiver To Serial Port?, Colin Andrews
mandrake 9.2 and PVR-250, Rory O'Connor
- Re: mandrake 9.2 and PVR-250, Malcolm-lirc
Help with compiling and running lirc on the zaurus 5600, cmisip
- Re: Help with compiling and running lirc on the zaurus 5600, Christoph Bartelmus
Re: lirc-0.7.0pre3 (was: [patch] updates for mceusb support) <- Looks like it is working now, Benjamin Watkins