|
|
December 20, 2003
- Re: RCX 1.0 without external power jack?, Philippe Hurbain
- Re: Made me cry!, Alberto Manuel Brandão Simões
- Re: RCX 1.0 without external power jack?, Paul Britton
- Made me cry!, Paul Britton
- Re: Product Review: Linksys WVC11B and VEO Observer, Johan Helsingius
- Re: RCX 1.0 without external power jack?, Philippe Hurbain
- Re: RCX 1.0 without external power jack?, Scott Lyttle
- Behavior of the Roomba, Nikhil Sarma
- Re: RCX 1.0 without external power jack?, Ross Crawford
- Re: RCX 1.0 without external power jack?, Scott Davis
- Re: RCX 1.0 without external power jack?, Mike Kollross
- Re: RCX 1.0 without external power jack?, Ross Crawford
- RE: RCX 1.0 without external power jack?, Liz Bilbro
- RCX 1.0 without external power jack?, Mike Kollross
December 08, 2003
- Re: Legway and Robolab, Steve Hassenplug
- RE: Legway and Robolab, Bill Blackmer
- Legway and Robolab, Jones, James
- Re: WWW spider, Kevin L. Clague
- RE: Legway EOPDs, Rob Limbaugh
- Re: Legway EOPDs, Chris Phillips
- Re: Legway EOPDs, Brian Davis
- Re: Legway EOPDs, Rob Hendrix
- Legway EOPDs, Steve Hassenplug
- Simen Svale Skogsrud website ?, Philippe Hurbain
- Re: WWW spider, pixel
December 03, 2003
- Bump switches and "aggression", Ralph Toepper
- RE: Bump switches and "aggression", Rob Limbaugh
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- Re: Bump switches and "aggression", David Koudys
- Re: Bump switches and "aggression", Rob Hendrix
- Re: Bump switches and "aggression", David Koudys
- Re: Bump switches and "aggression", Gordon Elliott
- Re: Bump switches and "aggression", Jim Choate
- Re: Bump switches and "aggression", Gordon Elliott
- Re: Bump switches and "aggression", Steve Hassenplug
- Bump switches and "aggression", Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, pixel
- Roll up, roll up!, John Barnes
- Seeking session/expo coordinators for sculpture/mosaic, castle, mindstorms/technic/robotics, Larry Pieniazek
- Re: an idea, can someone tell me if this is possible/been done before/etc?, pixel
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Gordon Elliott
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Steve Baker
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
December 02, 2003
- Re: an idea, can someone tell me if this is possible/been done before/etc?, PeterBalch
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin Clague
- Re: an idea, can someone tell me if this is possible/been donebefore/etc?, Kevin L. Clague
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- RE: an idea, can someone tell me if this is possible/been donebefore/etc?, Rob Limbaugh
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Gordon Elliott
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Gordon Elliott
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- Re: Search algorithms, T. Alexander Popiel
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Gordon Elliott
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, pixel
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, pixel
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Philippe hurbain
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
- Re: an idea, can someone tell me if this is possible/been done before/etc?, pixel
- Search algorithms, lester witter
- Re: Robotex2003 Winner: Lego, Sonnich Jensen
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Kevin L. Clague
December 01, 2003
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Jim Choate
- Re: Pneumatic Quadraped 242, Kevin L. Clague
- Re: New LEGOTIC Hand, Philippe Hurbain
- Re: an idea, can someone tell me if this is possible/been done before/etc?, Steve Baker
- an idea, can someone tell me if this is possible/been done before/etc?, Jonathan Wilson
November 30, 2003
- Re: Robolab, byte codes and assembler, Philippe Hurbain
- Re: Robolab, byte codes and assembler, Don Stauffer
- Re: Robolab, byte codes and assembler, Mark Tarrabain
- Building a RCX™-compatible temperature sensor, Philippe Hurbain
- Re: Patched firmware to improve rotation sensor, was Re: Robolab, byte codes and assembler, Philippe Hurbain
- Re: Patched firmware to improve rotation sensor, was Re: Robolab, byte codes and assembler, Don Stauffer
- Re: Patched firmware to improve rotation sensor, was Re: Robolab, byte codes and assembler, Steve Baker
- Re: Patched firmware to improve rotation sensor, was Re: Robolab, byte codes and assembler, Dick Swan
- Re: Patched firmware to improve rotation sensor, was Re: Robolab, byte codes and assembler, Don Stauffer
November 29, 2003
- Re: Patched firmware to improve rotation sensor, was Re: Robolab, byte codes and assembler, Chris Phillips
- Re: Patched firmware to improve rotation sensor, was Re: Robolab, byte codes and assembler, Philippe Hurbain
- Re: Universal Remote vs Lego remote, Steve Baker
- Re: Universal Remote vs Lego remote, Eric
- Re: Patched firmware to improve rotation sensor, was Re: Robolab, byte codes and assembler, Don Stauffer
- Re: Robolab, byte codes and assembler, Don Stauffer
- Patched firmware to improve rotation sensor, was Re: Robolab, byte codes and assembler, Philippe Hurbain
- Universal Remote vs Lego remote, Mike Kollross
- Re: Robolab, byte codes and assembler, Steve Baker
- Re: robotics, Steve Baker
- Re: robotics, Steve Baker
- Re: Robolab, byte codes and assembler, Dick Swan
November 28, 2003
- Re: Simulating pneumatic sequencers, was Re: Pneumatic Quadraped 242, Philippe Hurbain
- Re: Please help (Follow up to my earlier post), Ildefonso Zanette
- Re: Please help (Follow up to my earlier post), Rob Hendrix
- Re: Simulating pneumatic sequencers, was Re: Pneumatic Quadraped 242, Andy Gombos
- Re: Simulating pneumatic sequencers, was Re: Pneumatic Quadraped 242, Kevin L. Clague
- Re: Please help (Follow up to my earlier post), Ildefonso Zanette
- robotics, pixel
November 26, 2003
- Updates on addresses of sites under ozBricks, the black sword
- Re: Simulating pneumatic sequencers, was Re: Pneumatic Quadraped 242, Philippe Hurbain
- Re: Simulating pneumatic sequencers, was Re: Pneumatic Quadraped 242, Kevin L. Clague
- Re: Simulating pneumatic sequencers, was Re: Pneumatic Quadraped 242, Kevin L. Clague
- Re: External power supply ?, Juergen Stuber
- Simulating pneumatic sequencers, was Re: Pneumatic Quadraped 242, Philippe Hurbain
- Re: External power supply ?, Philippe Hurbain
November 25, 2003
- Re: Read Receipt requested from "Chris" messages, chris
- Read Receipt requested from "Chris" messages, Gordon Elliott
- Re: External power supply ?, Jim
- RE: External power supply ?, Rob Limbaugh
- Re: HELP, please! USB tower problems, Chris Phillips
- Re: External power supply ?, Philippe Hurbain
- Re: HELP, please! USB tower problems, chris
- Re: External power supply ?, nanobapt
- External power supply ?, I. Smoltsak
- RE: HELP, please! USB tower problems, Rob Limbaugh
- Re: HELP, please! USB tower problems, ruth
- Re: HELP, please! USB tower problems, Ruth
- Re: HELP, please! USB tower problems, Chris Phillips
- RE: HELP, please! USB tower problems, Rob Limbaugh
- Re: HELP, please! USB tower problems, Ruth
- Re: HELP, please! USB tower problems, Ruth
- RE: HELP, please! USB tower problems, Rob Limbaugh
- Re: HELP, please! USB tower problems, Rob Hendrix
- Re: HELP, please! USB tower problems, Ruth
- Re: HELP, please! USB tower problems, Alex Jayasundara
- JCB JS220 Excavator, Jennifer Clark
November 24, 2003
- Re: HELP, please! USB tower problems, Ruth
- Re: HELP, please! USB tower problems, Ruth
- Re: HELP, please! USB tower problems, Rob Hendrix
- HELP, please! USB tower problems, Ruth
- Re: Pneumatic Quadraped 242, Kevin L. Clague
- Re: Pneumatic Quadraped 242, Kevin L. Clague
- Re: Pneumatic Quadraped 242, Tobbe Arnesson
- Re: Pneumatic Quadraped 242, Philippe Hurbain
- Re: Pneumatic Quadraped 242, Kevin L. Clague
November 21, 2003
- Re: Are there GOTO statements in NQC?, T. Alexander Popiel
- Robotex2003 Winner: Lego, Sonnich Jensen
- Re: Ultrasonic proximity sensor, Chris Phillips
- Re: Ultrasonic proximity sensor, Jim Choate
- Re: Ultrasonic proximity sensor, Mark Tarrabain
- Re: Are there GOTO statements in NQC?, Jim Choate
- Re: Are there GOTO statements in NQC?, Jim Choate
- Re: Are there GOTO statements in NQC?, Brian B. Alano
- Re: Are there GOTO statements in NQC?, T. Alexander Popiel
- Re: Are there GOTO statements in NQC?, Ralph Toepper
- Re: Are there GOTO statements in NQC?, T. Alexander Popiel
- Re: Ultrasonic proximity sensor, michael shiloh
- Re: Are there GOTO statements in NQC?, Steve Baker
November 20, 2003
- Re: Are there GOTO statements in NQC?, Steve Baker
- Re: Ultrasonic proximity sensor, michael shiloh
- Re: Are there GOTO statements in NQC?, T. Alexander Popiel
- Re: Ultrasonic proximity sensor, Jim Choate
- RE: Are there GOTO statements in NQC?, Rob Limbaugh
- Re: Ultrasonic proximity sensor, Jim Choate
- Ultrasonic proximity sensor, Nitin Patil
- Re: Are there GOTO statements in NQC?, Steve Baker
- Re: Are there GOTO statements in NQC?, Steve Baker
- Re: Are there GOTO statements in NQC?, John Hansen
- Re: Are there GOTO statements in NQC?, Kevin L. Clague
- RE: Are there GOTO statements in NQC?, Ralph Hempel
- Re: Are there GOTO statements in NQC?, Kevin L. Clague
- Re: Are there GOTO statements in NQC?, Kevin L. Clague
- Re: Are there GOTO statements in NQC?, Mark Riley
- Re: Are there GOTO statements in NQC?, John Hansen
- Re: Are there GOTO statements in NQC?, T. Alexander Popiel
- Re: Are there GOTO statements in NQC?, T. Alexander Popiel
- Re: Are there GOTO statements in NQC?, John Hansen
- Re: usb problem, h . gokmen
- Are there GOTO statements in NQC?, Vadim Iosifovich Vaynerman
- Re: usb problem, Rand Krakora
November 18, 2003
- Re: Please help (XP,RIS 2.0 problem), Nathan Colyer
- Re: Technic Turntables, David Koudys
- Re: Please help (XP,RIS 2.0 problem), Rob Hendrix
- Re: Please help (XP,RIS 2.0 problem) - some thoughts, John Hansen
- Re: Please help (XP,RIS 2.0 problem), Philippe Hurbain
- Re: Technic Turntables, Tobbe Arnesson
- Re: Please help (XP,RIS 2.0 problem) - some thoughts, Rob Hendrix
- Re: rcx unit, Brian B. Alano
- RE: Please help (XP,RIS 2.0 problem) - some thoughts, Bill Blackmer
- Re: Please help (XP,RIS 2.0 problem), Rob Hendrix
- Re: Please help (XP,RIS 2.0 problem), Rob Hendrix
November 17, 2003
- do-it-yourself NiMh AA cell, Pat LaVarre
- Re: rcx unit, Allan Tobey
- Attn: List Moderator, pmunce
- Re: rcx unit, Robert Seifert
- Re: rcx unit, chrismaker
- Re: rcx unit, Chris Phillips
- Re: rcx unit, Robert Seifert
- Re: rcx unit, Chris Phillips
- Re: rcx unit, Mark Tarrabain
- Re: rcx unit, David Koudys
- rcx unit, Allan Tobey
- Memory, Evan Todd
- Re: Please help (XP,RIS 2.0 problem), John Hansen
- Re: Pneumatic Quadraped 242, Jona
- Re: Please help (XP,RIS 2.0 problem), Scott Davis
- Please help (XP,RIS 2.0 problem), Rob Hendrix
- Re: Pneumatic Quadraped 242, Kevin L. Clague
November 14, 2003
- Re: Technic Turntables, Rob Doucette
- RE: Technic Turntables, Liz Bilbro
- Re: Technic Turntables, Mark Tarrabain
- RE: Technic Turntables, Liz Bilbro
- RE: Technic Turntables, Bill Blackmer
- Re: Technic Turntables, Scott Davis
- Bohrok Gears was: Technic Turntables, Mark Riley
- RE: Technic Turntables, Liz Bilbro
- Re: Technic Turntables, Philippe Hurbain
- Re: Technic Turntables, Rob Doucette
- Technic Turntables, GAIER ADAM
- Re: Pneumatic Quadraped 242, Kevin L. Clague
- Re: Pneumatic Quadraped 242, Kevin L. Clague
- Re: Pnumatic Grabber arm using Large (48mm) cylinders, Jennifer Clark
- Re: Pnumatic Grabber arm using Large (48mm) cylinders, Tobbe Arnesson
- Re: Pneumatic Quadraped 242, Tobbe Arnesson
- Pnumatic Grabber arm using Large (48mm) cylinders, JJ Harrison
- Re: Motor Power, Nathan Colyer
November 12, 2003
- Re: Motor Power, Dan Novy
- Re: Motor Power, Mike Thorn
- Motor Power, Gahlord Dewald
- Re: 4095 Record and Play, Mark Riley
- Re: One Input - Two Outputs?, Duane Hess
- Re: 4095 Record and Play, John Barnes
- Re: One Input - Two Outputs?, Duane Hess
- Re: One Input - Two Outputs?, Chris Phillips
- Re: One Input - Two Outputs?, Steve Hassenplug
- Re: Lego brick Database, Bob Kojima
- One Input - Two Outputs?, Duane Hess
- Re: Homebrew sensors (where to find them), Philippe Hurbain
- Re: Lego brick Database, Duq
- Re: Homebrew sensors (where to find them), Jona
- Re: Lego brick Database, Rob Hendrix
- Lego brick Database, Jan Spies
- Re: polish version of mlcad, pixel
- Re: Alternate IR Comm Setups, Chris Phillips
- Alternate IR Comm Setups, Dustin Jones
November 11, 2003
- Re: Homebrew sensors (where to find them), Dave Astolfo
- Re: Memory Map for the RCX, Mark Riley
- Re: Mars Rover, Claude Baumann
- Memory Map for the RCX, Rob Limbaugh
- Re: Mars Rover, nanobapt
- Re: 4095 Record and Play, Philippe Hurbain
- Re: Mars Rover, Claude Baumann
- Mars Rover, Claude Baumann
- Re: Homebrew sensors (where to find them), Chris Phillips
- Re: polish version of mlcad, shaggie
- Homebrew sensors (where to find them), Nick Solarz
- Re: 4095 Record and Play, Rob Hendrix
November 07, 2003
- Re: Biggest lego wheel?, M. Moolhuysen
- polish version of mlcad, pixel
- Re: Biggest lego wheel?, Philippe Hurbain
- Re: 9747 (RIS 1.5) comes with 2.0 RCX brick?!?, Juergen Stuber
- replacement for RCX 2.0, Thomas=20Kronschl=E4ger
- Re: Biggest lego wheel?, Jonathan Wilson
- Biggest lego wheel?, Mike Reddy
- Re: Mindstorms 3.0 Wish List, Philippe Hurbain
- Re: 9747 (RIS 1.5) comes with 2.0 RCX brick?!?, Steve Baker
- Re: Mindstorms 3.0 Wish List, Chris Phillips
November 06, 2003
- Re: RCX questions, Juergen Stuber
- Re: More Speed? Re: Mindstorms 3.0 Wish List, Juergen Stuber
- Re: Mindstorms 3.0 Wish List, Ted Michon
- Re: More Speed? Re: Mindstorms 3.0 Wish List, John Barnes
- 9747 (RIS 1.5) comes with 2.0 RCX brick?!?, Wessel Burgers
- Re: RCX questions, pixel
- Re: RIS 2.0 USB Tower on a Mac, Dave Baum
- Re: More Speed? Re: Mindstorms 3.0 Wish List, Mark Tarrabain
- RCX questions, Jonathan Wilson
- Re: Mindstorms 3.0 Wish List, Jonathan Wilson
- Re: Mindstorms 3.0 Wish List, Jonathan Wilson
November 05, 2003
- Re: RIS 2.0 USB Tower on a Mac, Brian Davis
- Re: More Speed? Re: Mindstorms 3.0 Wish List, T. Alexander Popiel
- Re: Amid crowds, I wish to ask a question..... (RCX IR communication emulation), Chris Phillips
- Amid crowds, I wish to ask a question..... (RCX IR communication emulation), Bluey
- RIS 2.0 USB Tower on a Mac, Edwin Quan
- Re: More Speed? Re: Mindstorms 3.0 Wish List, Steve Hassenplug
- Re: More Speed? Re: Mindstorms 3.0 Wish List, Chris Phillips
- RE: More Speed? Re: Mindstorms 3.0 Wish List, Rob Limbaugh
- Re: More Speed? Re: Mindstorms 3.0 Wish List, Chris Phillips
- Re: Mindstorms 3.0 Wish List, Rob Limbaugh
- Re: More Speed? Re: Mindstorms 3.0 Wish List, Jordan Bradford
- Re: More Speed? Re: Mindstorms 3.0 Wish List, Rob Hendrix
- Re: Mindstorms 3.0 Wish List, Brian Davis
- Re: More Speed? Re: Mindstorms 3.0 Wish List, Mark Riley
- Re: More Speed? Re: Mindstorms 3.0 Wish List, John Barnes
- Re: Mindstorms 3.0 Wish List, John Gerlach
- Re: Mindstorms 3.0 Wish List, Rand Krakora
- Re: More Speed? Re: Mindstorms 3.0 Wish List, Chris Phillips
- Re: More Speed? Re: Mindstorms 3.0 Wish List, John Barnes
- RE: Mindstorms 3.0 Wish List, Ralph Hempel
- Re: More Speed? Re: Mindstorms 3.0 Wish List, Chris Phillips
- Re: More Speed? Re: Mindstorms 3.0 Wish List, cmagno
- Re: Mindstorms 3.0 Wish List, pixel
- Re: More Speed? Re: Mindstorms 3.0 Wish List, John Barnes
- Re: Mindstorms 3.0 Wish List, Brass Tilde
- Re: Mindstorms 3.0 Wish List, Steve Baker
- More Speed? Re: Mindstorms 3.0 Wish List, Steve Hassenplug
- Re: Mindstorms 3.0 Wish List, Chris Phillips
- Re: to analog as rcx is to programming plastic, Pat LaVarre
- Re: Mindstorms 3.0 Wish List, pixel
- Re: Mindstorms 3.0 Wish List, pixel
- Re: Mindstorms 3.0 Wish List, Jordan Bradford
- Robotics Books, Joseph A. O'Donnell
October 22, 2003
- Re: RIS2.0 and win 2000, tips and trick, TJ Avery
- RIS2.0 and win 2000, tips and trick, chrismaker
- Re: International Shopping, Rob Doucette
- International Shopping, SGershon
- Re: Mindstorms add-ons such as Exploration Mars, Brass Tilde
- Re: Mindstorms add-ons such as Exploration Mars, Bruce Boyes
- RE: Will RCX 1.0 work with USB IR Tower and RIS2.0 Software?, Ralph Hempel
- Will RCX 1.0 work with USB IR Tower and RIS2.0 Software?, Parag Kanetkar
- Re: Mindstorms add-ons such as Sports, Exploration Mars, Rob Hendrix
- Re: deleting legOS firmware fails, Rob Limbaugh
- deleting legOS firmware fails, Hecke Schrobsdorff
- Re: Mindstorms add-ons such as Sports, Exploration Mars, chrismaker
October 10, 2003
- Re: lego how to, Michael Obenland
- RE: Mechanical pneumatic piston, Rob Limbaugh
- lego how to, Sonja Hänzelmann
- RE: Mechanical pneumatic piston, Mike Thorn
- Re: Mechanical pneumatic piston, Kevin L. Clague
- Re: Mechanical pneumatic piston, Kevin L. Clague
- Re: Mechanical pneumatic piston, Mike Thorn
- Re: Mechanical pneumatic piston, David Schilling
- Re: Mechanical pneumatic piston, Steve Baker
- Re: Mechanical pneumatic piston, Mike Thorn
October 05, 2003
- Re: Touch sensor problems, Nitin Patil
- Re: Touch sensor problems, Jim Choate
- Re: Touch sensor problems, Mark H. Near
- Touch sensor problems, Camp0s
- Re: My New LEGO Mindstorms Book Is Available, Don Wilcher
- Re: End of Mindstorms :-( - I'm very skeptical, Rick Silver
- Re: Wheels, Tyres and Tractions, Steve Baker
- RE: End of Mindstorms :-(, Liz Bilbro
- Re: Wheels, Tyres and Tractions, James Ryan
- Re: My New LEGO Mindstorms Book Is Available, Kevin L. Clague
- Re: End of Mindstorms :-(, mick marriott
- Re: End of Mindstorms :-(, David Schilling
- RE: End of Mindstorms :-( - I'm very skeptical, Liz Bilbro
- My New LEGO Mindstorms Book Is Available, Don Wilcher
- Re: End of Mindstorms :-(, chrismaker
September 17, 2003
- Re: JCX and Legos to appear in Denmark next week, Bruce Boyes
- Re: JCX and Legos to appear in Denmark next week, Tim Auton
- Re: Vision Command SUCKS, Stephane Simard
- Re: Vision Command for newbies, Tim Auton
- Re: JCX and Legos to appear in Denmark next week, Rob Hendrix
- Re: JCX and Legos to appear in Denmark next week, Rob Hendrix
- JCX and Legos to appear in Denmark next week, Bruce Boyes
- Re: Anyone sell Electric wire ends?, Rob Hendrix
- Re: Anyone sell Electric wire ends?, Rob Limbaugh
- Re: Anyone sell Electric wire ends?, Legoguy
- Re: Anyone sell Electric wire ends?, Legoguy
- Re: Anyone sell Electric wire ends?, Rob Hendrix
September 03, 2003
- Re: All-Terrain, Ed Manlove
- RE: understanding the opcode, Ralph Hempel
- understanding the opcode, Pierre Spring
- understanding the opcode, Pierre Spring
- Re: Yet another Technic 9V motor comparison update, Larry Pieniazek
- Re: Yet another Technic 9V motor comparison update, pixel
- All-Terrain, Evan Todd
- Re: Yet another Technic 9V motor comparison update, Philippe Hurbain
- Re: Yet another Technic 9V motor comparison update, Tobbe Arnesson
- Re: Yet another Technic 9V motor comparison update, pixel
- Yet another Technic 9V motor comparison update, Philippe Hurbain
September 01, 2003
- Re: RCX's, Stephane Simard
- RemoteCX 0.0.0.6, Legoguy
- Re: Weird RCX electrical ideas, Jordan Bradford
- Re: RemoteCX 0.0.0.5, Legoguy
- Re: Weird RCX electrical ideas, Jordan Bradford
- Re: RemoteCX 0.0.0.5, Legoguy
- Re: RemoteCX 0.0.0.5, Gordon Elliott
- Re: RemoteCX 0.0.0.5, nanobapt
- Re: Weird RCX electrical ideas, Chris Phillips
- RemoteCX 0.0.0.5, Legoguy
- Re: Weird RCX electrical ideas, Orion Pobursky
- Re: Weird RCX electrical ideas, Purple Dave
- Weird RCX electrical ideas, Jordan Bradford
- Re: What are good LEGO robotics challenges?, Jordan Bradford
August 22, 2003
- Re: LABEL GENERATION, Ed Manlove
- Re: LABEL GENERATION, Kevin L. Clague
- LABEL GENERATION, Fauze Valerio Polpeta
- Re: RIS 3.0, Philippe Hurbain
- Re: RIS 3.0, Tim Auton
- Re: Pneumatic Magic Presetnation Maertials, Tim Auton
- Re: RIS 3.0, Mark Riley
- Re: RIS 3.0, Rob Hendrix
- Re: RIS 3.0, Legoguy
- Re: RIS 3.0, Rob Hendrix
August 21, 2003
- Re: RIS 3.0, Legoguy
- Re: RCX & RIS, a fading glory?, Jordan Bradford
- Re: RCX & RIS, a fading glory?, Jordan Bradford
- Re: Pneumatic Magic Presetnation Maertials, Mark Tarrabain
- New To Robotics, Sriyantha Perera
- Re: Pneumatic Magic Presetnation Maertials, Jennifer Clark
- lnp_integrity_write() and frame errors, Andy Goetz
- Re: Pneumatic Magic Presetnation Maertials, Kevin L. Clague
- Re: Pneumatic Magic Presetnation Maertials, Kevin L. Clague
- Re: RCX & RIS, a fading glory?, Dan Simonson
August 19, 2003
- Re: light scout, Philippe Hurbain
- Re: Pneumatic Magic Presetnation Maertials, Kevin L. Clague
- Re: LEGWAY software questions, Kevin L. Clague
- Lego Mindstorms Mars Rover Robotics Camp, Tonya Witherspoon
- Re: LEGWAY software questions, Steve Hassenplug
- Re: RIS 3.0, Rob Hendrix
- light scout, travis
- Re: Pneumatic Magic Presetnation Maertials, TJ Avery
- Re: LEGWAY software questions, Kevin L. Clague
- Re: LEGWAY software questions, Steve Hassenplug
- Pneumatic Magic Presetnation Maertials, Kevin L. Clague
- Re: Pneumatic Magic Presetnation Maertials, Lars Gjerløw Jørgensen
- Pneumatic card on LEGOTIC, chrismaker
- Re: Pneumatic Magic Presetnation Maertials, Kim Andersen
- LEGWAY software questions, Kevin L. Clague
- Re: Pneumatic Magic Presetnation Maertials, Ross Crawford
- Re: RIS 3.0, chrismaker
- Re: Pneumatic Magic Presetnation Maertials, Ross Crawford
- Re: Pneumatic Magic Presetnation Maertials, Kevin L. Clague
- Re: Pneumatic Magic Presetnation Maertials, Kevin L. Clague
- better algorithimo, Luiz Antonio
- Re: Pneumatic Magic Presetnation Maertials, Kevin L. Clague
- Re: Pneumatic Magic Presetnation Maertials, Tobbe Arnesson
- Race Robot, Evan Todd
- RIS 3.0, Henrik Johansson
- Re: Pneumatic Magic Presetnation Maertials, Lars Gjerløw Jørgensen
- Re: Pneumatic Magic Presetnation Maertials, Kevin L. Clague
- Re: light scout, travis
- Re: Pneumatic Magic Presetnation Maertials, Kim Andersen
- Re: light scout, Philippe Hurbain
- Re: RIS 3.0, John Barnes
- Re: RIS 3.0, travis
- Re: Pneumatic Magic Presetnation Maertials, Kevin L. Clague
- Re: Pneumatic Magic Presetnation Maertials, Ross Crawford
July 07, 2003
- Re: uCOG VI, improved leg geometry, Kevin L. Clague
- Re: MOC - Small Pneumatic Biped Walker, Kevin L. Clague
- Re: Pneumatic Inchworm, Kevin L. Clague
- Re: Pneumatic Inchworm, Kevin L. Clague
- Re: Pneumatic Inchworm, pixel
- Re: Pneumatic Inchworm, Anders Isaksson
- Re: BrickVista web site launch, John Carrasquillo
- Re: Pneumatic Inchworm, Kevin L. Clague
- Re: Pneumatic Inchworm, Brian H. Nielsen
July 03, 2003
- Re: HailFire Droid wheels, Alfio Scaletta
- Do not open the attachment from barnes@xxxxxxxxxxxx It is a virus., Kam Tsang
- HailFire Droid wheels, Mike Thorn
- Re: New Mini-Motor vs. Old Mini-Motor, Philippe Hurbain
- Re: Robolab Investigator, c s soh
- Re: Cameras & RCX Robots, no cables please!, Steve Baker
- New Mini-Motor vs. Old Mini-Motor, Max Maxwell
- Re: Roll up, roll up!, TJ Avery
- Roll up, roll up!, John Barnes
July 01, 2003
- Steering mechanism linked to a turn-table, HOW?, Richard Diaz
- RE: Need Help Setting up Apache Web Server, Rob Limbaugh
- Re: Need Help Setting up Apache Web Server, richard marchetti
- Re: Need Help Setting up Apache Web Server, Max Maxwell
- Re: A better full adder!, Kevin L. Clague
- Re: Need Help Setting up Apache Web Server, Doug Wilcox
- Re: A better full adder!, Mark Tarrabain
- Re: A better full adder!, Kevin L. Clague
- Re: A better full adder!, Mark Tarrabain
- Need Help Setting up Apache Web Server, Max Maxwell
- Re: A better full adder!, Kevin L. Clague
- Re: A better full adder!, Brian H. Nielsen
- Re: A better full adder!, Mark Tarrabain
- Re: A better full adder!, Brian H. Nielsen
- Re: A better full adder!, Ross Crawford
- Re: A better full adder!, Mark Tarrabain
- Re: A better full adder!, Brian H. Nielsen
- Re: Mechanical Memory for Computing, Kevin L. Clague
- custom aluminum axle, travis
- Re: Mechanical Memory for Computing, John Barnes
June 28, 2003
- Re: A better full adder!, Mark Tarrabain
- Chameleobot the Quadruped: 4 and 1/2 foot MOC, David Perdue
- Re: A better full adder!, Mark Tarrabain
- Re: Wheel measurements, Mike Thorn
- Wheel measurements, Rob Limbaugh
- Re: A better full adder!, Kevin L. Clague
- Re: A better full adder!, Mark Tarrabain
- Re: A better full adder!, Mark Tarrabain
- Re: Where and what to buy?, Bob Fay
- RE: Announcing new Lego website: The Art of Brick, Russell C. Brown [RR-1]
- Re: A better full adder!, Kevin L. Clague
June 27, 2003
- Announcing new Lego website: The Art of Brick, David Perdue
- Re: Where and what to buy?, Larry Pieniazek
- Re: Where and what to buy?, Maggie Cambron
- Re: A better full adder!, Mark Tarrabain
- Re: Parts lists, Brass Tilde
- Re: Parts lists, Mike Thorn
- Parts lists, Brass Tilde
- Re: Where and what to buy?, Larry Pieniazek
- Re: Where and what to buy?, Richard Diaz
- Re: Where and what to buy?, Larry Pieniazek
- Re: Where and what to buy?, Richard Diaz
- Re: Where and what to buy?, Richard Diaz
- Where and what to buy?, Jonathan Spitz
- Re: gear pulley/release system, James Ryan
- Re: A better full adder!, Kevin L. Clague
- Re: gear pulley/release system, Bruce Boyes
- Re: gear pulley/release system, scott davis
June 26, 2003
- Re: A better full adder!, Mark Tarrabain
- Re: A better full adder!, Kevin L. Clague
- Re: A better full adder!, Kevin L. Clague
- Re: gear pulley/release system, Øyvind Steinnes
- Re: A better full adder!, Mark Tarrabain
- Re: Mechanical Memory for Computing, T. Alexander Popiel
- Re: Mechanical Memory for Computing, Bruce Boyes
- Re: A better full adder!, Kevin L. Clague
- Re: Mechanical Memory for Computing, Ross Crawford
- Re: Mechanical Memory for Computing, Michael Cotsford
- Re: Wow... this is cool!, Mark Tarrabain
- Re: Wow... this is cool!, Rob Limbaugh
- Re: A better full adder!, Mark Riley
- A better full adder!, Mark Tarrabain
June 25, 2003
- Re: gear pulley/release system, Richard Diaz
- Re: gear pulley/release system, Richard Diaz
- Re: gear pulley/release system, Øyvind Steinnes
- Re: Wow... this is cool!, Andy Gombos
- Re: Wow... this is cool!, Mark Tarrabain
- RE: Wow... this is cool!, Richard Diaz
- Re: Wow... this is cool!, Mark Tarrabain
- RE: Wow... this is cool!, ComCast_1
- Re: Mechanical Memory for Computing, Brian H. Nielsen
- Re: Mechanical Memory for Computing, Brian H. Nielsen
- Re: Mechanical Memory for Computing, Steve Baker
- Re: Mechanical Memory for Computing, Steve Baker
- Re: Mechanical Memory for Computing, Jona
- Re: Mechanical Memory for Computing, Mark Tarrabain
- Wow... this is cool!, Mark Tarrabain
- Mechanical Memory for Computing, Brian H. Nielsen
June 16, 2003
- Re: Building instructions for reversible, variable speed (barely) pneumatic engine, Richard Diaz
- contest suggestion coke can searcher an idea.., m8114
- Re: MOC - Small Pneumatic Biped Walker, Kevin L. Clague
- version of firmware, Richard Diaz
- Re: MOC - Small Pneumatic Biped Walker, Eric Sophie
- RE: EGAD! (pneumatics), Rob Limbaugh
- RE: EGAD! (pneumatics), Rob Limbaugh
- Re: maze solving algorithm, Jona
- Re: EGAD! (pneumatics), Mark Tarrabain
- Re: EGAD! (pneumatics), Philippe Hurbain
- Re: MOC - Small Pneumatic Biped Walker, Kevin L. Clague
- Re: EGAD! (pneumatics), Kevin L. Clague
- Re: EGAD! (pneumatics), Mark Tarrabain
- Re: EGAD! (pneumatics), c s soh
- Re: MOC - Small Pneumatic Biped Walker, Kevin L. Clague
- Re: MOC - Small Pneumatic Biped Walker, Paul Krieg
June 15, 2003
- MOC - Small Pneumatic Biped Walker, Kevin L. Clague
- Re: maze solving algorithm, scott davis
- Re: EGAD! (pneumatics), Kevin L. Clague
- Re: EGAD! (pneumatics), Mark Tarrabain
- Re: Building instructions for reversible, variable speed (barely) pneumatic engine, Paul Krieg
- Re: maze solving algorithm, Bluey
- Re: EGAD! (pneumatics), c s soh
- Re: EGAD! (pneumatics), Mark Tarrabain
- Re: maze solving algorithm, scott davis
- Re: maze solving algorithm, Bluey
- Re: maze solving algorithm, Ralph Toepper
June 13, 2003
- Re: Technic 9V motor comparison update, TJ Avery
- Re: Technic 9V motor comparison update, Lars Gjerløw Jørgensen
- Re: Technic 9V motor comparison update, Steven lane
- Re: Technic 9V motor comparison update, TJ Avery
- Re: Technic 9V motor comparison update, Philippe Hurbain
- Re: Technic 9V motor comparison update, miguel agullo
- Technic 9V motor comparison update, Philippe Hurbain
- Jamocklaquat - Technical Journal now Online, Eric Sophie
- Re: maze solving algorithm, Bluey
- MedamaOyaji ROBOT kit from Japan, Koichi Endou
- Re: Control RCX through internet, Tonya L. Witherspoon
June 11, 2003
- Re: Deconstruction, Puffie40
- Re: Lubricating technic turntables, Puffie40
- Re: Lego Bionicle Manas, Rob Doucette
- Re: maze solving algorithm, Bluey
- Re: A free motorized switch with every compressor, David Koudys
- RE: Lego Bionicle Manas, Rob Limbaugh
- Re: A free motorized switch with every compressor, Kevin L. Clague
- Re: A free motorized switch with every compressor, TJ Avery
- Re: Lego Bionicle Manas, Mike Thorn
- Lego Bionicle Manas, Jones, James
- Re: MOC Differtimento, Orion Pobursky
- Re: MOC Differtimento, Tom Beattie
- Control RCX through internet, David
- Follow-Up... Re: NHL Hockey sets... thoughts..., Rob Limbaugh
- Re: A free motorized switch with every compressor, Kevin L. Clague
- A free motorized switch with every compressor, Kevin L. Clague
June 09, 2003
- Re: Binary Pneumatic addition with two pistons, Kevin L. Clague
- Re: Binary Pneumatic addition with two pistons, T. Alexander Popiel
- Re: MOC Differtimento, miguel agullo
- Re: Binary Pneumatic addition with two pistons, Mark Tarrabain
- Re: Variable Speed, reversible pneumatic engine, Kevin L. Clague
- Re: Binary Pneumatic addition with two pistons, Kevin L. Clague
- Re: Binary Pneumatic addition with two pistons, Mark Tarrabain
- Re: Variable Speed, reversible pneumatic engine, Jason J Railton
- Perfect geometry for large pump compressor, Kevin L. Clague
- Binary Pneumatic addition with two pistons, Kevin L. Clague
- Re: LEGO robotics on a budget?, Rob Limbaugh
- Re: LEGO robotics on a budget?, Purple Dave
June 08, 2003
- Robolab upgrade to 2.5.3 and other things, Bill Blackmer
- Re: LEGO robotics on a budget?, Rob Limbaugh
- Re: Variable Speed, reversible pneumatic engine, Kevin L. Clague
- Re: The Alexis Radial Air Compressor, c s soh
- Re: maze solving algorithm, Bluey
- Re: The Alexis Radial Air Compressor, Steven lane
- Re: maze solving algorithm, scott davis
- Re: LEGO robotics on a budget?, Chris Daniel
- Re: LEGO robotics on a budget?, Purple Dave
- The Alexis Radial Air Compressor, c s soh
- Re: maze solving algorithm, Bluey
- Mindstorms robotic modules, Purple Dave
June 05, 2003
- Re: Variable Speed, reversible pneumatic engine, Paul Krieg
- Re: Variable Speed, reversible pneumatic engine, Kevin L. Clague
- Re: Variable Speed, reversible pneumatic engine, Kevin L. Clague
- Re: Variable Speed, reversible pneumatic engine, Eric Shrader
- Re: Variable Speed, reversible pneumatic engine, Rob Stehlik
- Re: Variable Speed, reversible pneumatic engine, c s soh
- Re: Variable Speed, reversible pneumatic engine, Kevin L. Clague
May 27, 2003
- Re: THOUGHTS on mapping with Lego Robot ( added to searching walls), chammers
- Re: Future Mindstorms Release, Steve Baker
- Re: THOUGHTS on mapping with Lego Robot ( added to searching walls), Steve Baker
- Re: searching walls, Brian H. Nielsen
- Re: Future Mindstorms Release, John Gerlach
- Re: Future Mindstorms Release, Matthew Miller
- Future Mindstorms Release, question
- THOUGHTS on mapping with Lego Robot ( added to searching walls), Bill Blackmer
- "The Matrix:Reloaded " & "X2 :X-Men United" available in DVD now, Movieontheway
- Re: searching walls, Steve Baker
- Re: searching walls, Patrick Craig
May 14, 2003
- Re: Custom Pneumatic Parts, Bram Lambrecht
- Re: COG shifter off topic, Kevin L. Clague
- Re: uCOG V - my tiniest weight shifting walker, Kevin L. Clague
- Re: uCOG V - my tiniest weight shifting walker, Philippe Hurbain
- Re: Custom Pneumatic Parts, Irvin Stafford
- Re: Custom Pneumatic Parts, Tobbe Arnesson
- Re: uCOG V - my tiniest weight shifting walker, Kevin L. Clague
- Re: Custom Pneumatic Parts, Jennifer Clark
- Re: COG shifter off topic, pixel
- Re: OS Stability concerns, Maggie Cambron
May 13, 2003
- Re: I2C interface, Mark Riley
- RE: COG shifter off topic, Tony Burton
- Re: I2C interface, Bastiaan van Kesteren
- Re: COG shifter off topic, Kevin L. Clague
- Packet format for sending(data) from the RCX to the PC, Michael Franklin Bosu
- Re: Custom Pneumatic Parts, Tobbe Arnesson
- Re: Custom Pneumatic Parts, Steven lane
- Re: OS Stability concerns (from/was RE: Vision Command), Jim Choate
- Re: COG shifter off topic, Kevin L. Clague
- COG shifter off topic, pixel
- Re: Wheels, Tyres and Tractions, Tobbe Arnesson
- Re: OS Stability concerns (from/was RE: Vision Command), Mark Riley
- Re: OS Stability concerns (from/was RE: Vision Command), Jim Choate
- Re: OS Stability concerns, Rob Limbaugh
- Re: OS Stability concerns (from/was RE: Vision Command), Purple Dave
- Re: OS Stability concerns (from/was RE: Vision Command), Maggie Cambron
- Re: OS Stability concerns, Rob Limbaugh
- Re: uCOG V - my tiniest weight shifting walker, Kevin L. Clague
- Re: OS Stability concerns (from/was RE: Vision Command), Purple Dave
May 12, 2003
- Re: uCOG V - my tiniest weight shifting walker, Eric Sophie
- Re: uCOG V - my tiniest weight shifting walker, TJ Avery
- OS Stability concerns (from/was RE: Vision Command), Rob Limbaugh
- Re: I2C interface, Mark Riley
- Re: uCOG V - my tiniest weight shifting walker, Kevin L. Clague
- Re: uCOG V - my tiniest weight shifting walker, TJ Avery
- Re: DC Adapter Mod for RCX 2.0?, Trevyn Watson
- Re: Vision Command, Purple Dave
- Re: DC Adapter Mod for RCX 2.0?, Matthew Keller
- Re: DC Adapter Mod for RCX 2.0?, Mark Riley
- Re: Wheels, Tyres and Tractions, pixel
- DC Adapter Mod for RCX 2.0?, Matthew Keller
- RE: uCOG V - my tiniest weight shifting walker, Hardison Leif
- Re: uCOG V - my tiniest weight shifting walker, Kevin L. Clague
- Re: uCOG V - my tiniest weight shifting walker, Kevin L. Clague
- Re: Vision Command, Jonathan Wilson
- Two options... RE: Vision Command, Rob Limbaugh
- Re: Wheels, Tyres and Tractions, Philippe Hurbain
- Re: uCOG V - my tiniest weight shifting walker, TJ Avery
- Re: Wheels, Tyres and Tractions, Philippe Hurbain
- Re: maze solving algorithm, Jona
- Re: uCOG V - my tiniest weight shifting walker, Kevin L. Clague
- Re: Vision Command, Purple Dave
- Re: Wheels, Tyres and Tractions, pixel
- Re: Wheels, Tyres and Tractions, Jennifer Clark
- Re: Vision Command, Mark P
- Re: uCOG V - my tiniest weight shifting walker, Philippe Hurbain
- Re: Vision Command, guido heunen
- Re: maze solving algorithm, Paul Szego
- Re: Vision Command, Eric Sophie
- Re: Vision Command, Purple Dave
- Re: maze solving algorithm, scott davis
- Vision Command, Peter De Wachter
- Re: maze solving algorithm, Paul Szego
May 11, 2003
- Re: uCOG V - my tiniest weight shifting walker, Kevin L. Clague
- Re: uCOG V - my tiniest weight shifting walker, Philippe Hurbain
- Re: Wheels, Tyres and Tractions, Philippe Hurbain
- uCOG V - my tiniest weight shifting walker, Kevin L. Clague
- Re: Wheels, Tyres and Tractions, Paul Krieg
- Wheels, Tyres and Tractions, Philippe Hurbain
- I2C interface, Bastiaan van Kesteren
May 08, 2003
- Re: My version of Jennifer Clark's Demag AC50-1, Ross Crawford
- RE: C#, VB, Visual Studio .NET and Mindstorms, Nathan Nesbit
- Tiny COG-Shifting biped walker, Øyvind Steinnes
- Re: Need beta tester for air valve., Øyvind Steinnes
- Re: Increase touch sensor sensitivity?, Brian B. Alano
- Re: OT GPS, Lars Gjerløw Jørgensen
- Need beta tester for air valve., Pete Sevcik
- Re: The Jamocklaquat, Eric Sophie
- Re: The Jamocklaquat, Glenn Holmer
April 15, 2003
- WS3D RCX Challenge #6 Results, David Schilling
- Re: Make Your Own HiTechnic Style Radio Control?, Irv Stafford
- Re: ....new robots and web site update....., Tom Beattie
- Re: and you thought I'd lost my mind when I built a turkey..., Adrian Drake
- Re: Rumors of LEGO XP Vision Command Software available..., Philip Thompson
- running bot, travis
- Re: IR Tower, Steve Baker
- Re: IR Tower, Rob Limbaugh
- Re: sensors, actuators, and software, oh my!, Michael Pender
- Re: Rumors of LEGO XP Vision Command Software available..., Eric Sophie
- Rumors of LEGO XP Vision Command Software available..., Rob Limbaugh
- Re: IR Tower, Rob Limbaugh
- Re: IR Tower, Darin Johnson
April 14, 2003
- Re: IR Tower, Nick Tarleton
- Re: sensors, actuators, and software, oh my!, Nick Tarleton
- Re: Serial Infrared Tower, Michael Pender
- Free RCX remote control, Michael Pender
- Re: sensors, actuators, and software, oh my!, Michael Pender
- Re: how can I get "manual" input into my RCX?, Stephen Edwards
- Re: what happened to hitechnic?, Dennis Bosman
- 8 legged walker, Brass Tilde
- Jama's Feet - THEY'RE FRELLING SUPER BOOTS!!!, Eric Sophie
April 08, 2003
- Re: An old machine, Dennis Bosman
- Re: baby walker, pixel
- Re: ....powered caster....., Philippe Hurbain
- Re: ....powered caster....., Ben Jackson
- Re: baby walker, Philippe Hurbain
- Re: baby walker, pixel
- Re: baby walker, Philippe Hurbain
- Re: baby walker, Philippe Hurbain
- Re: An old machine, andrea donadello
- Re: An old machine, Tobbe Arnesson
- An old machine, andrea donadello
- Jamocklaquat - Foot Development, Eric Sophie
- Re: Robolab line follwing program help, Jerry Kalpin
- Re: LDraw, Kevin L. Clague
- RE: LDraw, Brass Tilde
|
|