Hi,
This may not be of much help if you already have the Weasel cards, but
apparently the Peppercon eRIC cards support PowerEdge servers. Specifically,
the 'Quick Install Guide' mentions the following:
"In case your main board does not have single pins for reset and power switch,
you may use one of the front panel connectors peppercon offers (for Dell Power
Edge, Siemens, Intel, HP)."
I'm sure other people on this list are using eRIC cards with PowerEdge servers
(I think I heard about them first here).
Regards,
Basil Hussain
---------------------------------------
Internet Developer, Kodak Weddings
E-Mail: basil.hussain@xxxxxxxxxxxxxxxxx
-----Original Message-----
From: linux-poweredge-admin@xxxxxxxx [mailto:linux-poweredge-admin@xxxxxxxx]On
Behalf Of Brian K. Jones
Sent: 27 March 2003 16:09
To: Dell-Linux
Subject: 1650, 2650, and weasel cards.
Hi.
Wondering if anyone has some solution for using a weasel card in the Dell 1650
or 2650 servers, which don't seem to allow you to use a jumper for the reset
switch. We like the Dells, and we like Linux running on them, but this is a
drawback if we can't use any solution but Dell's for the console connection.
We need the ability to reset these things remotely. Is there a jumper anywhere
for the reset switch that I just haven't found? All I've found is something
that looks like a reset button - marked 'reset', on the motherboard itself.
thanks.
brian.
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge@xxxxxxxx
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq or search the list archives
at http://lists.us.dell.com/htdig/
|
