Re: ser_posix.c: is select()ing for the write descriptoruseful at all?

Hi there
As I am using avrdude on MacOS X, I may volunteer to check it out on  
the PC-based platform (Intel-based at a later point of time).
However, since I'm not reading this mail list's posts in detail, I  
need a briefing from someone what to be tested:
- software (which version, patch) to compile and which scenario to run?
- specific hardware, CP210x USB chip? To date I am using only a  
STK500v2 compatible programmer based on TDI chip (available from  
www.chip45.com) I have USB/RS232 converters based on CP210x but no  
serial programmer that I could connect behind the converter...

Cheers RAPHAEL




Am 19.04.2007 um 02:26 schrieb Eric Weddington:

> > -----Original Message-----
> > From:
> > avrdude-dev-bounces+eweddington=cso.atmel.com@xxxxxxxxxx
> > [mailto:avrdude-dev-bounces+eweddington=cso.atmel.com@xxxxxxxx
> > rg] On Behalf Of Joerg Wunsch
> > Sent: Wednesday, April 18, 2007 2:36 PM
> > To: avrdude-dev@xxxxxxxxxx
> > Cc: Axel Wachtler; Brian Dean
> > Subject: [avrdude-dev] ser_posix.c: is select()ing for the
> > write descriptoruseful at all?
> >
> > A fellow worker recently stumbled across avrdude not working  
> > against a
> > bootloader that was behind one of these Silabs CP210x USB/RS-232
> > bridges under Linux.
>
> Hallo Axel! ;-)
>
> > Would anybody terribly mind removing that piece of code?
>
> I assume that you guys already tested the patch on Linux and  
> FreeBSD? Can we
> get someone to test it on Mac OS X? (I also assume the same code is  
> valid
> for that OS.) Perhaps one of the guys over at the osxavr project  
> (on SF) can
> give it a quick run through.
>
> Eric Weddington
>
>
>
> _______________________________________________
> avrdude-dev mailing list
> avrdude-dev@xxxxxxxxxx
> http://lists.nongnu.org/mailman/listinfo/avrdude-dev

________________________________________________
Raphael Schumacher, Rütimeyerplatz 6, CH-4054 Basel
phone +41 61 321 9339 / mobile +41 79 445 3993
mail@xxxxxxxxxxxxxxxxxxxx