hardware.avr.avrdude.devel (thread)

[patch #4923] Better error reporting for serial-bitbang programmers, Joerg Wunsch
[patch #4635] Add support for terminal/console servers for serial programmers, Joerg Wunsch
How about changing the "stk500" programmer to V2 by default?, Joerg Wunsch
- RE: How about changing the "stk500" programmer to V2 bydefault?, Eric Weddington
- Re: How about changing the "stk500" programmer to V2 by default?, Matthias Ringwald
  - Re: How about changing the "stk500" programmer to V2 by default?, Dave N6NZ
    - Re: How about changing the "stk500" programmer to V2 by default?, Joerg Wunsch
  - Re: How about changing the "stk500" programmer to V2 by default?, Joerg Wunsch
[bug #16627] Butterfly programmer does not reset after programming, Joerg Wunsch
[bug #16265] dasa2 does not work under posix, Joerg Wunsch
jtag2 and usb timeout, Dave N6NZ
- Re: jtag2 and usb timeout, Joerg Wunsch
  - Re: jtag2 and usb timeout, Dave N6NZ
    - Re: jtag2 and usb timeout, Joerg Wunsch
    - Re: jtag2 and usb timeout, Dave N6NZ
    - Re: jtag2 and usb timeout, Dave N6NZ
    - Re: jtag2 and usb timeout, Joerg Wunsch
Newbie problems with JTAG ICE MK2 and AVRISP MK2, Dave N6NZ
- Re: Newbie problems with JTAG ICE MK2 and AVRISP MK2, Dave N6NZ
  - Re: Newbie problems with JTAG ICE MK2 and AVRISP MK2, Dave N6NZ
[bug #16443] No disable Resetsignal at the end of Programming Session, Joerg Wunsch
[patch #5057] quick and dirty Hack to unset Reset after Programming, Joerg Wunsch
[patch #5096] Allow VCC and BUFF to be any pin in parallel mode, Joerg Wunsch
[patch #5008] Patch for (5.1) ser_posix.c for O_NONBLOCK open and restoring serial port state on close, Joerg Wunsch
STK500v2 paged mode EEPROM fixes, Joerg Wunsch
[bug #15146] stk500v2_paged_write: loadpage instruction not defined for part, Joerg Wunsch
[bug #16849] EEPROM write fails for AT90USB1287 with mode 0x41, Joerg Wunsch
[bug #17199] EEPROM fails verification on ATmega645 with pony-stk200 hardware, Joerg Wunsch
[bug #15677] documentation mentions wrong programmer-id "avrispmk2", Joerg Wunsch
[bug #15826] avr910 device type for ATmega8 wrong, Joerg Wunsch
[bug #16671] Tiny2313 avr910_devcode is bad, Joerg Wunsch
[bug #16156] Problem with Si-Prog, Joerg Wunsch
- [bug #16156] Problem with Si-Prog, Joerg Wunsch
  - [bug #16156] Problem with Si-Prog, Joerg Wunsch
[bug #11650] Siprog in AVRDude, Joerg Wunsch
[bug #14920] tiny2313 fuses and AVRDUDE 5.0, Joerg Wunsch
[bug #15751] atmega48: no lock bits defined, Joerg Wunsch
[bug #17383] Wrong calibration section in avrdude.conf (ATmega 16/32/64/8535), Joerg Wunsch
[bug #12622] avrdude hangs on macosx/darwin with PL-2303 usb-to-serial and Butterfly, Joerg Wunsch
- [bug #12622] avrdude hangs on macosx/darwin with PL-2303 usb-to-serial and Butterfly, Joerg Wunsch
  - [bug #12622] avrdude hangs on macosx/darwin with PL-2303 usb-to-serial and Butterfly, Joerg Wunsch
[bug #17487] AVR RC oscillator calibration routine not supported, anonymous
- [bug #17487] AVR RC oscillator calibration routine not supported (feature request), Joerg Wunsch
[bug #16462] signature-errors in avrdude 5.1cvs - WindowsVesion (WinAVR 20060421), Joerg Wunsch
problem with win32 cygwin build - gettimeofday conflict, Neil Davey
- Re: problem with win32 cygwin build - gettimeofday conflict, Joerg Wunsch
[bug #16410] ATMega164/324/644 cannot be programmed, Joerg Wunsch
- [bug #16410] ATMega164/324/644 cannot be programmed, Joerg Wunsch
  - [bug #16410] ATMega164/324/644 cannot be programmed, Joerg Wunsch
[bug #15536] avrdude-5.1 compilation fails on Gentoo/amd64, Joerg Wunsch
RE: [bug #15372] Documentation does not get installed on Windows., Eric Weddington
- RE: [bug #15372] Documentation does not get installed on Windows., Eric Weddington
[bug #15372] Documentation does not get installed on Windows., Joerg Wunsch
- [bug #15372] Documentation does not get installed on Windows., Ralf Wildenhues
  - [bug #15372] Documentation does not get installed on Windows., Eric Weddington
[bug #17053] stk500v2 Length bytes mis-ordered, Joerg Wunsch
[patch #4539] Ability to control the bit clock (usleep) delay for ppi interface, Joerg Wunsch
- [patch #4539] Ability to control the bit clock (usleep) delay for ppi interface, Joerg Wunsch
avrdude slowdown (stk500v2_getsync() problem), Christopher James Huff
- Re: avrdude slowdown (stk500v2_getsync() problem), Joerg Wunsch
Loaddrv in windows subdir linking with libusb, Eric Weddington
- Re: Loaddrv in windows subdir linking with libusb, Joerg Wunsch
  - RE: Loaddrv in windows subdir linking with libusb, Eric Weddington
    - Re: Loaddrv in windows subdir linking with libusb, Joerg Wunsch
  - PP/HVSP modes completed (was: Loaddrv in windows subdir linking with libusb), Joerg Wunsch
patches #5008. 5025 and 5293 needed in our configuration for stk500 support, Matthias Ringwald
- RE: patches #5008. 5025 and 5293 needed in our configuration for stk500 support, Eric Weddington
STK500 firmware v2.7?, Russell Hoffman
- Re: STK500 firmware v2.7?, Joerg Wunsch
  - Re: STK500 firmware v2.7?, Joerg Wunsch