hardware.avr.avrdude.devel (thread)

Partial stk500v2 code, Erik Walthinsen
Re: STK500 version 2.0 protocol, Martin Thomas
- Re: Re: STK500 version 2.0 protocol, Matthias Weißer
  - Re: Re: STK500 version 2.0 protocol, E. Weddington
    - Re: Re: STK500 version 2.0 protocol, Joerg Wunsch
    - Re: Re: STK500 version 2.0 protocol, Erik Walthinsen
    - Re: Re: STK500 version 2.0 protocol, Joerg Wunsch
    - Re: Re: STK500 version 2.0 protocol, E. Weddington
    - Re: Re: STK500 version 2.0 protocol, Matthias Weißer
    - Re: Re: STK500 version 2.0 protocol, Joerg Wunsch
    - Re: Re: STK500 version 2.0 protocol, Brian Dean
    - Re: Re: STK500 version 2.0 protocol, Erik Walthinsen
- Re: Re: STK500 version 2.0 protocol, Erik Walthinsen
Anyone working on STK V2 patch?, Erik Walthinsen
- Re: Anyone working on STK V2 patch?, Brian Dean
[patch #3691] Adds -q -q quiet mode suitable for use in makefiles., anonymous
- [patch #3691] Adds -q -q quiet mode suitable for use in makefiles., anonymous
  - [patch #3691] Adds -q -q quiet mode suitable for use in makefiles., anonymous
STK500 version 2.0 protocol released, E. Weddington
- STK500 version 2.0 protocol, Matthias Weißer
  - RE: STK500 version 2.0 protocol, Alex Shepherd
    - Re: STK500 version 2.0 protocol, Brian Dean
[bugs #11650] Siprog in AVRDude, anonymous
Parallel programmers, Russell Shaw
- Re: Parallel programmers, Bob Paddock
  - Re: Parallel programmers, Russell Shaw
    - Re: Parallel programmers, Bob Paddock
    - Re: Parallel programmers, Russell Shaw
- Re: Parallel programmers, Galen Seitz
  - Re: Parallel programmers, Joerg Wunsch
    - Re: Parallel programmers, Russell Shaw
    - Re: Parallel programmers, Joerg Wunsch
- Re: Parallel programmers, www.mikrocontroller-projekte.de
STK500 V2.0 Firmare + AVRDUDE, Colin O'Flynn
- Re: STK500 V2.0 Firmare + AVRDUDE, Brian Dean
AVR910 Device Codes, E. Weddington
RE: ERE EMBMega32 board and avrdude.conf, Rune Christensen
- Re: ERE EMBMega32 board and avrdude.conf, Nathan Smith
What port is /dev/ppi under udev?, Bob Paddock
- Re: What port is /dev/ppi under udev?, Joerg Wunsch
- RE: What port is /dev/ppi under udev?, Daniel Williamson
Safemode patch feedback, E. Weddington
- Re: Safemode patch feedback, E. Weddington
- Re: Safemode patch feedback, Colin O'Flynn
- Re: Safemode patch feedback, Brian Dean
  - Re: Safemode patch feedback, E. Weddington
    - Re: Safemode patch feedback, Nathan Smith
    - mega32 board from ERE [was: Re: Safemode patch feedback], E. Weddington
    - ERE EMBMega32 board and avrdude.conf, Nathan Smith
    - Re: ERE EMBMega32 board and avrdude.conf, Nathan Smith
    - RE: ERE EMBMega32 board and avrdude.conf, Rune Christensen
    - Re: ERE EMBMega32 board and avrdude.conf, Joerg Wunsch
    - Re: ERE EMBMega32 board and avrdude.conf, Nathan Smith
    - Re: ERE EMBMega32 board and avrdude.conf, Joerg Wunsch
    - Re: ERE EMBMega32 board and avrdude.conf, Nathan Smith
    - RE: ERE EMBMega32 board and avrdude.conf, Rune Christensen
[bugs #11520] writing to ATTiny26 with paged mode failed. This was due to wrong address in programmer after "issue page write" command, anonymous
[ANN] GUI frontend project for avrdude, E. Weddington
- Re: [ANN] GUI frontend project for avrdude, Nathan Smith
[patch #3619] Safemode support, Colin O Flynn
- [patch #3619] Safemode support, Eric Weddington
  - [patch #3619] Safemode support, Colin O Flynn
    - [patch #3619] Safemode support, Colin O Flynn
    - [patch #3619] Safemode support, Eric Weddington
Patch for "Safemode" Support, Colin O'Flynn
- Re: Patch for "Safemode" Support, E. Weddington
- Re: Patch for "Safemode" Support, Joerg Wunsch
  - Re: Patch for "Safemode" Support, Joerg Wunsch
    - Re: Patch for "Safemode" Support, Colin O'Flynn
    - Re: Patch for "Safemode" Support, Joerg Wunsch
    - Re: Patch for "Safemode" Support, Colin O'Flynn
    - Re: Patch for Patch of "Safemode" Support, Colin O'Flynn
    - Re: Patch for "Safemode" Support, Joerg Wunsch
    - Re: Patch for "Safemode" Support, E. Weddington
    - Re: Patch for "Safemode" Support, E. Weddington
    - Re: Patch for "Safemode" Support, Brian Dean
  - Re: Patch for "Safemode" Support, E. Weddington
[bugs #11496] Memory bank calibration on atmega128 should have 4 bytes, anonymous
- Re: [bugs #11496] Memory bank calibration on atmega128 should have 4 bytes, Joerg Wunsch
[bugs #10752] EEPROM is erased when a FLASH write only requested, Eric Weddington