osdir.com
mailing list archive

Subject: Re: Re: A!p - msg#00022

List: os.freebsd.isp

Date: Prev Next Index Thread: Prev Next Index
Dear iolo technologies customer,

We appreciate your email. In our constant pursuit of more efficient customer
service (and due to an overwhelming amount of spam we receive through direct
email), we have recently adopted a new method of correspondence which will
allow you to reach the correct department faster and more effectively, thus
providing for a quicker response.

The following link provided below will direct you to our contact page. From
there you may email the specific department related to your inquiry.

http://www.iolo.com/contactus.cfm

To expedite your request (and to avoid retyping your message), we recommend
that you copy and paste your original email into the correspondence interfaces
located on the pages above.

We appreciate your understanding,

iolo technologies Customer Service

PS: This is an automatically generated message. Direct email responses are not
processed.
_______________________________________________
freebsd-isp@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-isp
To unsubscribe, send any mail to "freebsd-isp-unsubscribe@xxxxxxxxxxx"



Was this page helpful?
Yes No
Thread at a glance:

Previous Message by Date: click to view message preview

Re: Viable FreeBSD Network Access Server projects...?

this discussion takes me back about 8 years, cyclades serial cards with USR Robotics analog modems, what an octopus of cabling, not to mention all the power bricks. nowadays I'd pickup a used PM3 or USR/3com TC system. diana _______________________________________________ freebsd-isp@xxxxxxxxxxx mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-isp To unsubscribe, send any mail to "freebsd-isp-unsubscribe@xxxxxxxxxxx"

Next Message by Date: click to view message preview

Re: document [Incident: 050104-000071]

Since it has been four business days since we wrote to you, we will consider your incident closed until we hear from you again about it. If you did not see the response, a copy of it can be found at the top of the Discussion Thread below. If you need to update this incident with additional information, we suggest using the link at the end of this message and updating it directly. Or if you wish, click REPLY and place your message between the prompts at the end of this email. If, when replying, the prompts do not appear in the message, please copy the prompts referred to below, paste them into your MESSAGE REPLY and enter your reply between those prompts. Otherwise, we will not receive your message. ------------------------------------------------------ [==== Please enter your reply below this line ====] [==== Please enter your reply above this line ====] If your issue remains unresolved, we suggest updating this question directly on our web site at http://support.smithmicro.com/techsupport/kb.cfg/php.exe/enduser/acct_login.php?p_userid=freebsd-isp@xxxxxxxxxxx&p_next_page=myq_upd.php&p_refno=050104-000071&p_created=1104851114 Question Reference #050104-000071 --------------------------------------------------------------- Summary: Re: document Product: CheckIt Sub-Product: Professional Edition (Pro) Contact Information: freebsd-isp@xxxxxxxxxxx Date Created: 01/04/2005 07:05 AM Last Updated: 01/11/2005 03:36 AM Status: Solved Discussion Thread --------------------------------------------------------------- Auto-Response - 01/04/2005 07:05 AM This is an automated response to your request for support. Below you will find Suggested Answers to the question you submitted. Please review these for potential solutions to your question. If you still need assistance after reviewing them, try searching our Online Knowledge Base for more solutions by going to http://support.smithmicro.com/winindex.htm If we do not hear from you within 4 business days, your incident will be automatically considered solved. You may reopen this incident at any time by following the instructions below. Title: What information does Technical Support need to be able to answer a question about CheckIt products? Link: http://support.smithmicro.com/techsupport/kb.cfg/php.exe/enduser/std_adp.php?p_faqid=938&p_created=1017271529 Title: How can the software be reinstalled if it was downloaded? Link: http://support.smithmicro.com/techsupport/kb.cfg/php.exe/enduser/std_adp.php?p_faqid=996&p_created=1021490939 Title: I am having trouble downloading the product that I bought from the web store. Link: http://support.smithmicro.com/techsupport/kb.cfg/php.exe/enduser/std_adp.php?p_faqid=242&p_created=952018096 Title: What is the latest version of CheckIt Professional Edition? Link: http://support.smithmicro.com/techsupport/kb.cfg/php.exe/enduser/std_adp.php?p_faqid=272&p_created=995409261 Title: How Can I Get Technical Support for Older Smith Micro products? Link: http://support.smithmicro.com/techsupport/kb.cfg/php.exe/enduser/std_adp.php?p_faqid=237&p_created=952706987 Please go here: http://support.smithmicro.com/techsupport/kb.cfg/php.exe/enduser/std_adp.php?p_faqid=938 to see what kind of information the incident should be updated with in order to get an answer in a timely and efficient manner. If above it states 'No matches were found' there was not enough information provided by you in the original email for a suggestion to be sent. To update this incident with additional information, use the link below to update it directly. You may update your incident at http://support.smithmicro.com/techsupport/kb.cfg/php.exe/enduser/acct_login.php?p_userid=freebsd-isp@xxxxxxxxxxx&p_next_page=myq_upd.php&p_refno=050104-000071&p_created=1104851114 If the link above is not available, go to the Login Page: http://support.smithmicro.com/techsupport/kb.cfg/php.exe/enduser/acct_login.php, follow the instructions to log in and update your incident. You may also update the incident by replying to this message and placing your response between the prompts below: [==== Please enter your reply below this line ====] [==== Please enter your reply above this line ====] Customer - 01/04/2005 07:05 AM Please read the document. ==================== text File Attachment ==================== securitynotice.txt, 264 bytes, discarded: unable to save file _______________________________________________ freebsd-isp@xxxxxxxxxxx mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-isp To unsubscribe, send any mail to "freebsd-isp-unsubscribe@xxxxxxxxxxx"

Previous Message by Thread: click to view message preview

Re: Viable FreeBSD Network Access Server projects...?

From: Martes Wigglesworth <martes.wigglesworth@xxxxxxxxxxxxx> To: Christian Hiris <4711@xxxxxxxxx> Cc: "heath, Chia Hui Chen" <heath0504@xxxxxxxxx> Subject: Re: Viable FreeBSD Network Access Server projects...? Date: Sun, 09 Jan 2005 00:59:56 +0300 Also, to supply, 56K service, would I be able to use the multi-modem approach, or do I need to have the DSL with digital "modems" and all that jazz? I am reading about the digital "RAS" setups, and all the info sites that I am using seem to fall off, just after the analog explanations. They seem to have a good definition of the RAS system however, they fail to demonstrate how one may build one, using the digital cards, to service analog dialup traffic. -- Respectfully, M.G.W. System: PCChips K7SOM MB AMD K7 Pro 1800 256MB RAM 40GB HD 10/100 NIC FreeBSD-5.2.1-RELEASE _______________________________________________ freebsd-isp@xxxxxxxxxxx mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-isp To unsubscribe, send any mail to "freebsd-isp-unsubscribe@xxxxxxxxxxx"

Next Message by Thread: click to view message preview

virus found in sent message "Re: dokument"

Attention: freebsd-isp@xxxxxxxxxxx A virus was found in an Email message you sent. This Email scanner intercepted it and stopped the entire message reaching its destination. The virus was reported to be: Worm.SomeFool.X Please update your virus scanner or contact your IT support personnel as soon as possible as you may have a virus on your system. Your message was sent with the following envelope: MAIL FROM: freebsd-isp@xxxxxxxxxxx RCPT TO: 3701@xxxxxxxxxxxxxxxxx ... and with the following headers: --- MAILFROM: freebsd-isp@xxxxxxxxxxx Received: from unknown (HELO mailgate1.adm.arcor.net) ([10.14.5.5]) (envelope-sender <freebsd-isp@xxxxxxxxxxx>) by 10.145.18.21 (qmail-ldap-1.03) with SMTP for <3701@xxxxxxxxxxxxxxxxx>; 11 Jan 2005 16:39:38 -0000 Received: from discounttravel.de (Ia88e.i.pppool.de [85.73.168.142]) by mailgate1.adm.arcor.net (Arcor-CN-MailRelay) with ESMTP id 9BD32267B for <3701@xxxxxxxxxxxxxxxxx>; Tue, 11 Jan 2005 17:41:08 +0100 (MET) From: freebsd-isp@xxxxxxxxxxx To: 3701@xxxxxxxxxxxxxxxxx Subject: Re: dokument Date: Tue, 11 Jan 2005 17:41:22 +0100 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0004_00002C73.00003265" X-Priority: 3 X-MSMail-Priority: Normal Message-Id: <20050111164108.9BD32267B@xxxxxxxxxxxxxxxxxxxxxxx> --- _______________________________________________ freebsd-isp@xxxxxxxxxxx mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-isp To unsubscribe, send any mail to "freebsd-isp-unsubscribe@xxxxxxxxxxx"
Sign up for updates to this mailing list. email:
Loading Comments...
Home | News | Patents | Sitemap | FAQ | advertise

Advertising by