Re: Please test GEOM in -current...
On Fri, 29 Mar 2002, Poul-Henning Kamp wrote:
> In message <Pine.BSF.4.21.0203282019280.35752-100000@beppo>, Matthew Jacob
> >It probably is right.
> >The one system that I really had wanted to check this on was an XP1000 that
> >was connected to my VERITAS fabric with lots of Sun labelled disks.
> >Unfortunately, ATA chip for this system seems to be causing grief for Soren's
> >latest code, so I can't get booted. C'est la vie- sorry.....
> Try this:
I did already :-)... but then the machine froze:
g_post_event(1, 0, 0, 0xfffffe0016c53d80, 0)
ad0: <ST34313A/3.23> ATA-5 disk at ata0-master
ad0: 4126MB (8452080 sectors), 8944 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, WDMA2
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
g_do_event(0xfffffe0016e15c00) 1 m:0 g:0 p:0xfffffe0016c53d80 c:0 -
ad1: success setting WDMA2 on Cypress chip
g_post_event(1, 0, 0, 0xfffffe0016c53a00, 0)
ad1: <ST33210A/3.04> ATA-4 disk at ata0-slave
ad1: 3098MB (6346368 sectors), 6296 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, WDMA2
ad1: piomode=4 dmamode=2 udmamode=2 cblid=0
Waiting 15 seconds for SCSI devices to settle
isp1: driver initiated bus reset of bus 0
isp2: driver initiated bus reset of bus 0
g_post_event(1, 0, 0, 0xfffffe0016f1e580, 0)
pass0 at isp0 bus 0 target 2 lun 0
pass0: <VERITAS sdb1 active 2.00> Fixed Direct Access SCSI-3 device
pass0: Serial Number
pass0: 100.000MB/s transfers, Tagged Queueing Enabled
da0 at isp0 bus 0 target 2 lun 0
da0: <VERITAS sdb1 active 2.00> Fixed Direct Access SCSI-3 device
da0: 100.000MB/s transfers, Tagged Queueing Enabled
da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C)
release_aps: releasing secondary CPUs
Mounting root from ufs:/dev/ad0a
Dunno whether this was a GEOM or ATA issue. I'm betting the latter because
GEOM worked on the Alpha 4100 4-way that boots off of a differential ISP.
To Unsubscribe: send mail to majordomo@xxxxxxxxxxx
with "unsubscribe freebsd-alpha" in the body of the message