Author: dpage
Date: 2005-11-25 08:36:34 +0000 (Fri, 25 Nov 2005)
New Revision: 4754
Modified:
trunk/pgadmin3/pkg/mac/Makefile.am
trunk/pgadmin3/pkg/mac/complete-bundle.sh
trunk/pgadmin3/src/base/appbase.cpp
Log:
Here is a patch to copy pg_dump and pg_restore into
$bundledir/Contents/SharedSupport/helper/. pgAdmin3.app should
find it there, but I didn't test this yet (I just have
access to my build-machine over ssh ATM - I'll need my powerbook
to test this).
[Florian G. Pflug]
Modified: trunk/pgadmin3/pkg/mac/Makefile.am
===================================================================
--- trunk/pgadmin3/pkg/mac/Makefile.am 2005-11-24 09:33:31 UTC (rev 4753)
+++ trunk/pgadmin3/pkg/mac/Makefile.am 2005-11-25 08:36:34 UTC (rev 4754)
@@ -24,5 +24,7 @@
$(install_sh_DATA) "sql.icns" "$(bundledir)/Contents/Resources/sql.icns"
$$($(WX_CONFIG) --rezflags | sed 's/-t[[:space:]]*APPL//') \
"$(bundledir)/Contents/Resources/pgAdmin3.rsrc" -useDF
+ $(install_sh_PROGRAM) "$$($(PG_CONFIG) --bindir)/pg_dump"
"$(bundledir)/Contents/SharedSupport/helper/pg_dump"
+ $(install_sh_PROGRAM) "$$($(PG_CONFIG) --bindir)/pg_restore"
"$(bundledir)/Contents/SharedSupport/helper/pg_restore"
./complete-bundle.sh "$(bundledir)"
endif
Modified: trunk/pgadmin3/pkg/mac/complete-bundle.sh
===================================================================
--- trunk/pgadmin3/pkg/mac/complete-bundle.sh 2005-11-24 09:33:31 UTC (rev
4753)
+++ trunk/pgadmin3/pkg/mac/complete-bundle.sh 2005-11-25 08:36:34 UTC (rev
4754)
@@ -10,8 +10,7 @@
echo "Completing bundle: $bundle"
cd "$bundle"
-fw_basepath=$(dirname $(pwd))
-todo=$(find ./ | \
+todo=$(find ./ -perm +0111 ! -type d | \
xargs --replace=line file 'line' | \
sed -n 's/^\([^:][^:]*\):[[:space:]]*Mach-O executable ppc$/\1/p' | \
xargs echo -n \
@@ -22,6 +21,13 @@
todo_old=$todo ;
todo="" ;
for todo_obj in $todo_old; do
+ #Figure out the relative path from todo_obj to
Contents/Frameworks
+ fw_relpath=$(echo "$todo_obj" |\
+ sed -n
's|^\(\.//*\)\(\([^/][^/]*/\)*\)[^/][^/]*$|\2|gp' | \
+ sed -n 's|[^/][^/]*/|../|gp' \
+ )"Contents/Frameworks"
+
+ #Find all libraries $todo_obj depends on, but skip system
libraries
for lib in $(
otool -L $todo_obj | \
sed -n
's|^.*[[:space:]]\([^[:space:]]*\.dylib\).*$|\1|p' | \
@@ -30,22 +36,16 @@
lib_bn="$(basename "$lib")" ;
if ! test -f "Contents/Frameworks/$lib_bn"; then
echo "Adding library: $lib_bn (because of:
$todo_obj)"
- case "$lib" in
- /*)
- cp "$lib"
"Contents/Frameworks/$lib_bn"
- ;;
- *)
- cp "$fw_basepath/$lib"
"Contents/Frameworks/$lib_bn"
- ;;
- esac
+ cp "$lib" "Contents/Frameworks/$lib_bn"
+ chmod 755 "Contents/Frameworks/$lib_bn"
install_name_tool \
- -id
"@executable_path/../Frameworks/$lib_bn" \
+ -id "$lib_bn" \
"Contents/Frameworks/$lib_bn" || exit 1
todo="$todo Contents/Frameworks/$lib_bn"
fi
install_name_tool -change \
"$lib" \
- "@executable_path/../Frameworks/$lib_bn" \
+ "@executable_path/$fw_relpath/$lib_bn" \
"$todo_obj" || exit 1
done
done
Modified: trunk/pgadmin3/src/base/appbase.cpp
===================================================================
--- trunk/pgadmin3/src/base/appbase.cpp 2005-11-24 09:33:31 UTC (rev 4753)
+++ trunk/pgadmin3/src/base/appbase.cpp 2005-11-25 08:36:34 UTC (rev 4754)
@@ -1,223 +1,220 @@
-//////////////////////////////////////////////////////////////////////////
-//
-// pgAdmin III - PostgreSQL Tools
-// RCS-ID: $Id: misc.cpp 4054 2005-03-28 16:43:01Z andreas $
-// Copyright (C) 2002 - 2005, The pgAdmin Development Team
-// This software is released under the Artistic Licence
-//
-// base.cpp - Miscellaneous Basic Utilities
-//
-//////////////////////////////////////////////////////////////////////////
-
-#include "pgAdmin3.h"
-
-// wxWindows headers
-#include <wx/wx.h>
-#include <wx/dir.h>
-#include <wx/file.h>
-#include <wx/socket.h>
-#include <wx/xrc/xmlres.h>
-#include <wx/stdpaths.h>
-
-#include "copyright.h"
-#include "base/base.h"
-#include "base/appbase.h"
-#include "base/pgConnBase.h"
-#include "base/sysLogger.h"
-
-wxPathList path; // The search path
-wxString loadPath; // Where the program is loaded from
-wxString docPath; // Where docs are stored
-wxString uiPath; // Where ui data is stored
-wxString i18nPath; // Where i18n data is stored
-wxLog *logger;
-
-#define DOC_DIR wxT("/docs")
-#define UI_DIR wxT("/ui")
-#define I18N_DIR wxT("/i18n")
-
-#define SCRIPT_DIR wxT("/scripts")
-#define HELPER_DIR wxT("/helper")
-
-
-void pgAppBase::InitPaths()
-{
- loadPath=wxPathOnly(argv[0]);
- if (loadPath.IsEmpty())
- loadPath = wxT(".");
-
- // Look in the app directory for things first
- path.Add(loadPath);
-
-#if defined(__WXMSW__)
-
- // Search for the right paths. We check the following locations:
- //
- // 1) ./xxx - Running as a standalone install
- // 2) ../pgAdmin/xxx - Running in a pgInstaller 8.1 installation
- // (with the .exe and dlls in the main bin dir)
- // 3) ../../xxx or ../xxx - Running in a development environment
-
- if (wxDir::Exists(loadPath + I18N_DIR))
- i18nPath = loadPath + I18N_DIR;
- else if (wxDir::Exists(loadPath + wxT("/../pgAdmin III") + I18N_DIR))
- i18nPath = loadPath + wxT("/../pgAdmin III") + I18N_DIR;
- else
- i18nPath = loadPath + wxT("/../..") + I18N_DIR;
-
- if (wxDir::Exists(loadPath + DOC_DIR))
- docPath = loadPath + DOC_DIR;
- else if (wxDir::Exists(loadPath + wxT("/../pgAdmin III") DOC_DIR))
- docPath = loadPath + wxT("/../pgAdmin III") DOC_DIR;
- else
- docPath = loadPath + wxT("/../..") DOC_DIR;
-
- if (wxDir::Exists(loadPath + UI_DIR))
- uiPath = loadPath + UI_DIR;
- if (wxDir::Exists(loadPath + wxT("/../pgAdmin III") + UI_DIR))
- uiPath = loadPath + wxT("/../pgAdmin III") + UI_DIR;
- else
- uiPath = loadPath + wxT("/..") UI_DIR;
-
- // Look for a path 'hint' on Windows. This registry setting may
- // be set by the Win32 PostgreSQL installer which will generally
- // install pg_dump et al. in the PostgreSQL bindir rather than
- // the pgAdmin directory.
- wxRegKey hintKey(wxT("HKEY_LOCAL_MACHINE\\Software\\") APPNAME_L);
- if (hintKey.HasValue(wxT("Helper Path")))
- {
- wxString hintPath;
- hintKey.QueryValue(wxT("Helper Path"), hintPath);
- path.Add(hintPath);
- }
-
-#else
- wxString dataDir;
-
-#if defined(__WXMAC__)
-
- //When using wxStandardPaths on OSX, wx defaults to the unix,
- //not to the mac variants. Therefor, we request wxStandardPathsCF
- //directly.
- wxStandardPathsCF stdPaths ;
- dataDir = stdPaths.GetDataDir() ;
-
- if (wxDir::Exists(dataDir + HELPER_DIR))
- path.Add(dataDir + HELPER_DIR) ;
- if (wxDir::Exists(dataDir + SCRIPT_DIR))
- path.Add(dataDir + SCRIPT_DIR) ;
-
-#else // other *ixes
-
-// Data path (defined by configure under Unix).
-#ifndef DATA_DIR
-#define DATA_DIR "./"
-#endif
-
- dataDir = wxString::FromAscii(DATA_DIR);
-#endif
-
-
- if (dataDir)
- {
- if (wxDir::Exists(dataDir + I18N_DIR))
- i18nPath = dataDir + I18N_DIR;
-
- if (wxDir::Exists(dataDir + UI_DIR))
- uiPath = dataDir + UI_DIR;
-
- if (wxDir::Exists(dataDir + DOC_DIR))
- docPath = dataDir + DOC_DIR ;
- }
-
- if (i18nPath.IsEmpty())
- {
- if (wxDir::Exists(loadPath + I18N_DIR))
- i18nPath = loadPath + I18N_DIR;
- else
- i18nPath = loadPath + wxT("/..") I18N_DIR;
- }
- if (uiPath.IsEmpty())
- {
- if (wxDir::Exists(loadPath + UI_DIR))
- uiPath = loadPath + UI_DIR;
- else
- uiPath = loadPath + wxT("/..") UI_DIR;
- }
-
- if (docPath.IsEmpty())
- {
- if (wxDir::Exists(loadPath + DOC_DIR))
- docPath = loadPath + DOC_DIR ;
- else
- docPath = loadPath + wxT("/..") DOC_DIR ;
- }
-#endif
-
- path.AddEnvList(wxT("PATH"));
-}
-
-
-void pgAppBase::InitXml()
-{
-#define chkXRC(id) XRCID(#id) == id
- wxASSERT_MSG(
- chkXRC(wxID_OK) &&
- chkXRC(wxID_CANCEL) &&
- chkXRC(wxID_HELP) &&
- chkXRC(wxID_APPLY) &&
- chkXRC(wxID_ADD) &&
- chkXRC(wxID_STOP) &&
- chkXRC(wxID_REMOVE)&&
- chkXRC(wxID_REFRESH) &&
- chkXRC(wxID_CLOSE),
- wxT("XRC ID not correctly assigned."));
- // if this assert fires, some event table uses XRCID(...) instead of
wxID_... directly
-
-
-
-#ifdef EMBED_XRC
-
- // resources are loaded from memory
- extern void InitXmlResource();
- InitXmlResource();
-
-#else
-
- // for debugging, dialog resources are read from file
- wxXmlResource::Get()->Load(uiPath + wxT("/*.xrc"));
-#endif
-
-}
-
-
-void pgAppBase::InitLogger()
-{
- logger = new sysLogger();
- wxLog::SetActiveTarget(logger);
-}
-
-
-void pgAppBase::InitNetwork()
-{
- // Startup the windows sockets if required
-#ifdef __WXMSW__
- WSADATA wsaData;
- if (WSAStartup(MAKEWORD(1, 1), &wsaData) != 0) {
- wxLogFatalError(__("Cannot initialise the networking subsystem!"));
- }
-#endif
- wxSocketBase::Initialize();
-
- pgConnBase::ExamineLibpqVersion();
-}
-
-
-int pgAppBase::OnExit()
-{
-#ifdef __WXMSW__
- WSACleanup();
-#endif
-
- return 1;
-}
+//////////////////////////////////////////////////////////////////////////
+//
+// pgAdmin III - PostgreSQL Tools
+// RCS-ID: $Id: misc.cpp 4054 2005-03-28 16:43:01Z andreas $
+// Copyright (C) 2002 - 2005, The pgAdmin Development Team
+// This software is released under the Artistic Licence
+//
+// base.cpp - Miscellaneous Basic Utilities
+//
+//////////////////////////////////////////////////////////////////////////
+
+#include "pgAdmin3.h"
+
+// wxWindows headers
+#include <wx/wx.h>
+#include <wx/dir.h>
+#include <wx/file.h>
+#include <wx/socket.h>
+#include <wx/xrc/xmlres.h>
+#include <wx/stdpaths.h>
+
+#include "copyright.h"
+#include "base/base.h"
+#include "base/appbase.h"
+#include "base/pgConnBase.h"
+#include "base/sysLogger.h"
+
+wxPathList path; // The search path
+wxString loadPath; // Where the program is loaded from
+wxString docPath; // Where docs are stored
+wxString uiPath; // Where ui data is stored
+wxString i18nPath; // Where i18n data is stored
+wxLog *logger;
+
+#define DOC_DIR wxT("/docs")
+#define UI_DIR wxT("/ui")
+#define I18N_DIR wxT("/i18n")
+
+#define HELPER_DIR wxT("/helper")
+
+
+void pgAppBase::InitPaths()
+{
+ loadPath=wxPathOnly(argv[0]);
+ if (loadPath.IsEmpty())
+ loadPath = wxT(".");
+
+ // Look in the app directory for things first
+ path.Add(loadPath);
+
+#if defined(__WXMSW__)
+
+ // Search for the right paths. We check the following locations:
+ //
+ // 1) ./xxx - Running as a standalone install
+ // 2) ../pgAdmin/xxx - Running in a pgInstaller 8.1 installation
+ // (with the .exe and dlls in the main bin dir)
+ // 3) ../../xxx or ../xxx - Running in a development environment
+
+ if (wxDir::Exists(loadPath + I18N_DIR))
+ i18nPath = loadPath + I18N_DIR;
+ else if (wxDir::Exists(loadPath + wxT("/../pgAdmin III") + I18N_DIR))
+ i18nPath = loadPath + wxT("/../pgAdmin III") + I18N_DIR;
+ else
+ i18nPath = loadPath + wxT("/../..") + I18N_DIR;
+
+ if (wxDir::Exists(loadPath + DOC_DIR))
+ docPath = loadPath + DOC_DIR;
+ else if (wxDir::Exists(loadPath + wxT("/../pgAdmin III") DOC_DIR))
+ docPath = loadPath + wxT("/../pgAdmin III") DOC_DIR;
+ else
+ docPath = loadPath + wxT("/../..") DOC_DIR;
+
+ if (wxDir::Exists(loadPath + UI_DIR))
+ uiPath = loadPath + UI_DIR;
+ if (wxDir::Exists(loadPath + wxT("/../pgAdmin III") + UI_DIR))
+ uiPath = loadPath + wxT("/../pgAdmin III") + UI_DIR;
+ else
+ uiPath = loadPath + wxT("/..") UI_DIR;
+
+ // Look for a path 'hint' on Windows. This registry setting may
+ // be set by the Win32 PostgreSQL installer which will generally
+ // install pg_dump et al. in the PostgreSQL bindir rather than
+ // the pgAdmin directory.
+ wxRegKey hintKey(wxT("HKEY_LOCAL_MACHINE\\Software\\") APPNAME_L);
+ if (hintKey.HasValue(wxT("Helper Path")))
+ {
+ wxString hintPath;
+ hintKey.QueryValue(wxT("Helper Path"), hintPath);
+ path.Add(hintPath);
+ }
+
+#else
+ wxString dataDir;
+
+#if defined(__WXMAC__)
+
+ //When using wxStandardPaths on OSX, wx defaults to the unix,
+ //not to the mac variants. Therefor, we request wxStandardPathsCF
+ //directly.
+ wxStandardPathsCF stdPaths ;
+ dataDir = stdPaths.GetDataDir() ;
+
+ if (wxDir::Exists(dataDir + HELPER_DIR))
+ path.Add(dataDir + HELPER_DIR) ;
+
+#else // other *ixes
+
+// Data path (defined by configure under Unix).
+#ifndef DATA_DIR
+#define DATA_DIR "./"
+#endif
+
+ dataDir = wxString::FromAscii(DATA_DIR);
+#endif
+
+
+ if (dataDir)
+ {
+ if (wxDir::Exists(dataDir + I18N_DIR))
+ i18nPath = dataDir + I18N_DIR;
+
+ if (wxDir::Exists(dataDir + UI_DIR))
+ uiPath = dataDir + UI_DIR;
+
+ if (wxDir::Exists(dataDir + DOC_DIR))
+ docPath = dataDir + DOC_DIR ;
+ }
+
+ if (i18nPath.IsEmpty())
+ {
+ if (wxDir::Exists(loadPath + I18N_DIR))
+ i18nPath = loadPath + I18N_DIR;
+ else
+ i18nPath = loadPath + wxT("/..") I18N_DIR;
+ }
+ if (uiPath.IsEmpty())
+ {
+ if (wxDir::Exists(loadPath + UI_DIR))
+ uiPath = loadPath + UI_DIR;
+ else
+ uiPath = loadPath + wxT("/..") UI_DIR;
+ }
+
+ if (docPath.IsEmpty())
+ {
+ if (wxDir::Exists(loadPath + DOC_DIR))
+ docPath = loadPath + DOC_DIR ;
+ else
+ docPath = loadPath + wxT("/..") DOC_DIR ;
+ }
+#endif
+
+ path.AddEnvList(wxT("PATH"));
+}
+
+
+void pgAppBase::InitXml()
+{
+#define chkXRC(id) XRCID(#id) == id
+ wxASSERT_MSG(
+ chkXRC(wxID_OK) &&
+ chkXRC(wxID_CANCEL) &&
+ chkXRC(wxID_HELP) &&
+ chkXRC(wxID_APPLY) &&
+ chkXRC(wxID_ADD) &&
+ chkXRC(wxID_STOP) &&
+ chkXRC(wxID_REMOVE)&&
+ chkXRC(wxID_REFRESH) &&
+ chkXRC(wxID_CLOSE),
+ wxT("XRC ID not correctly assigned."));
+ // if this assert fires, some event table uses XRCID(...) instead of
wxID_... directly
+
+
+
+#ifdef EMBED_XRC
+
+ // resources are loaded from memory
+ extern void InitXmlResource();
+ InitXmlResource();
+
+#else
+
+ // for debugging, dialog resources are read from file
+ wxXmlResource::Get()->Load(uiPath + wxT("/*.xrc"));
+#endif
+
+}
+
+
+void pgAppBase::InitLogger()
+{
+ logger = new sysLogger();
+ wxLog::SetActiveTarget(logger);
+}
+
+
+void pgAppBase::InitNetwork()
+{
+ // Startup the windows sockets if required
+#ifdef __WXMSW__
+ WSADATA wsaData;
+ if (WSAStartup(MAKEWORD(1, 1), &wsaData) != 0) {
+ wxLogFatalError(__("Cannot initialise the networking subsystem!"));
+ }
+#endif
+ wxSocketBase::Initialize();
+
+ pgConnBase::ExamineLibpqVersion();
+}
+
+
+int pgAppBase::OnExit()
+{
+#ifdef __WXMSW__
+ WSACleanup();
+#endif
+
+ return 1;
+}
---------------------------(end of broadcast)---------------------------
TIP 5: don't forget to increase your free space map settings
|
