Re: Solaris 10 -- mysql-5.0.22 DBD::mysql Fails to Build

Are you sure that Perl and DBD::mysql were compiled with the
same compiler? They need to be.

Martin

Andrew Nelson wrote:
> On Fri, 16 Jun 2006 17:48:08 +0100, Martin J. Evans wrote:
>
> Again thanks for the help.
>
> I've managed to hack past this compile problem and it does look like Sun
> has a fix on the way.
>
> http://forum.sun.com/jive/thread.jspa?threadID=99060
>
> The problem is that even if I run 
>
> perl Makefile.PL --cflags=-'I/opt/mysql/mysql/include -mt -ftrap=%none
> -nofstore -xbuiltin=%all -xlibmil -xlibmopt -xtarget=generic'
>
> the cc command still runs with -x03.  So I edit the generated make file
> and remove the flag there.
>
> But now that I can make I still can't make test.
>
> Pretty much every test fails with this error.
>
> PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 
> 'blib/lib', 'blib/arch')" t/*.t
> t/00base.............install_driver(mysql) failed: Can't load 
> '/home/andy/DBD-mysql-3.0006/blib/arch/auto/DBD/mysql/mysql.so' for module 
> DBD::mysql: ld.so.1: perl: fatal: relocation error: file 
> /home/andy/DBD-mysql-3.0006/blib/arch/auto/DBD/mysql/mysql.so: symbol 
> __1cG__CrunMex_rethrow_q6F_v_: referenced symbol not found at 
> /usr/perl5/5.8.4/lib/i86pc-solaris-64int/DynaLoader.pm line 230.
>  at (eval 3) line 3
> Compilation failed in require at (eval 3) line 3.
> Perhaps a required shared library or dll isn't installed where expected
>  at t/00base.t line 38
>
> I've googled around and found other people have the same problem but I'm
> yet to see a solution.
>
>
> Anyone have any idea how to get fix this error?
>
> //andy
>   
>
>
>
>
> > Andrew,
> >
> > Sorry but they were my best 2 suggestions - your compiler is basically falling
> > over. You could always send this to Sun.
> >
> > Martin
> > --
> > Martin J. Evans
> > Easysoft Ltd, UK
> > http://www.easysoft.com
> >
> >
> > On 16-Jun-2006 Andrew Nelson wrote:
> >
> > > On Fri, 16 Jun 2006 09:22:16 +0100, Martin J. Evans wrote:
> > >
> > > Thanks for the quick response.  Problem is I've allready applied that
> > > patch and still no luck.  I get the exact same error.  I've allso tried
> > > lowering the optimization.
> > >
> > > -I/opt/mysql/mysql/include -xO2 -mt -fsimple=1 -ftrap=%none -nofstore
> > > -xbuiltin=%all -xlibmil -xlibmopt
> > >
> > > -I/opt/mysql/mysql/include -xO1 -mt -fsimple=1 -ftrap=%none -nofstore
> > > -xbuiltin=%all -xlibmil -xlibmopt
> > >
> > > -I/opt/mysql/mysql/include -mt -fsimple=1 -ftrap=%none -nofstore
> > > -xbuiltin=%all -xlibmil -xlibmopt
> > >
> > > And still I've had no luck.
> > >
> > > //andy
> > >
> > >
> > >
> > > > A google search for "ube: error: Assert has been violated at" seems show
> > > > many
> > > > very similar looking issues.
> > > >
> > > > http://sunsolve.sun.com/search/document.do?assetkey=120759-05h
> > > >
> > > > Try getting your compiler patches up to date or lowering the level of
> > > > optimisation - the -xO3.
> > > >
> > > > Martin
> > > >
> > > > On 15-Jun-2006 Andrew Nelson wrote:
> > > >
> > > > > I can't get DBD::mysql to build on Solaris 10 using the mysql.com provided
> > > > > .pkg and the Sun Forte Compiler.
> > > > >
> > > > > bash-3.00$ echo $PATH
> > > > > /opt/SUNWspro/bin:/opt/SUNWspro/prod/bin:/opt/mysql/mysql/bin:/usr/ccs/bin:/
> > > > > op
> > > > > t/SUNWspro/bin:/opt/mysql/mysql/bin:/usr/ccs/bin:/usr/bin:/usr/ucb:/etc:.
> > > > > bash-3.00$ perm Makefile.PL
> > > > > bash: perm: command not found
> > > > > bash-3.00$ perl Makefile.PL
> > > > > I will use the following settings for compiling and testing:
> > > > >
> > > > >  cflags        (mysql_config) = -I/opt/mysql/mysql/include -xO3 -mt
> > > > > -fsimple=1 -ftrap=%none -nofstore -xbuiltin=%all -xlibmil -xlibmopt
> > > > > -xtarget=generic
> > > > >  embedded      (mysql_config) = 
> > > > >  libs          (mysql_config) = -L/opt/mysql/mysql/lib -lmysqlclient -lz
> > > > > -lposix4 -lcrypt -lgen -lsocket -lnsl -lm
> > > > >  mysql_config  (guessed     ) = mysql_config
> > > > >  nocatchstderr (default     ) = 0
> > > > >  nofoundrows   (default     ) = 0
> > > > >  ssl           (guessed     ) = 0
> > > > >  testdb        (default     ) = test
> > > > >  testhost      (default     ) = 
> > > > >  testpassword  (default     ) = 
> > > > >  testsocket    (default     ) = 
> > > > >  testuser      (default     ) = 
> > > > >
> > > > > To change these settings, see 'perl Makefile.PL --help' and
> > > > > 'perldoc INSTALL'.
> > > > >
> > > > > Checking if your kit is complete...
> > > > > Looks good
> > > > > Using DBI 1.51 (for perl 5.008004 on i86pc-solaris-64int) installed in
> > > > > /usr/perl5/site_perl/5.8.4/i86pc-solaris-64int/auto/DBI/
> > > > > Writing Makefile for DBD::mysql
> > > > > bash-3.00$ make
> > > > > cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm
> > > > > cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm
> > > > > cp lib/Mysql.pm blib/lib/Mysql.pm
> > > > > cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod
> > > > > cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm
> > > > > cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm
> > > > > cc -c  -I/usr/perl5/site_perl/5.8.4/i86pc-solaris-64int/auto/DBI
> > > > > -I/opt/mysql/mysql/include -xO3 -mt -fsimple=1 -ftrap=%none -nofstore
> > > > > -xbuiltin=%all -xlibmil -xlibmopt -xtarget=generic
> > > > > -DDBD_MYSQL_INSERT_ID_IS_GOOD -g  -D_LARGEFILE_SOURCE
> > > > > -D_FILE_OFFSET_BITS=64
> > > > > -D_TS_ERRNO -xO3 -xspace -xildoff    -DVERSION=\"3.0006\" 
> > > > > -DXS_VERSION=\"3.0006\" -KPIC
> > > > > "-I/usr/perl5/5.8.4/lib/i86pc-solaris-64int/CORE"   dbdimp.c
> > > > > "dbdimp.c", line 3774:ube: error: Assert has been violated at
> > > > > '/export/home1/train_builds/venus_patch/build.0427/intel-S2/lang/ube/opt/src
> > > > > /c
> > > > > fg.c 2553'.
> > > > > cc: ube failed for dbdimp.c
> > > > > *** Error code 2
> > > > > make: Fatal error: Command failed for target `dbdimp.o'
> > > > > bash-3.00$ 
> > > > >
> > > > >
> > > > > Does anyone have any idea what might be going on?
> > > > >
> > > > > Thanks much
> > > > >
> > > > > //andy


--
MySQL Perl Mailing List
For list archives: http://lists.mysql.com/perl
To unsubscribe:    
http://lists.mysql.com/perl?unsub=gcdmp-msql-mysql-modules@xxxxxxxxxxx