RE: MaxDB ODBC initial connect time approx. 30 seconds

> (re: post http://lists.mysql.com/maxdb/25024 )
> 
> In reference to the below problem, I would like to says a big 'THANK YOU' to 
> Henrik Hempelmann!  Your answer was the correct solution for me!  Thanks so 
> much, again!
> 
> ------------------------------------------------------------------------------------------------------------------------
> 
> 
> 
> 
> Hi there, and thanks in advance for any help you can give to this problem!
> 
> I am running the following:
> 
> Server:
> Max Db, Version 7.5.00.23 (Commercial License)
> Build 023-123-087-292
> Windows 2K (win32) Server
> 
> Client:
> MaxDb ODBC driver 7.05.00.00, SQLOD32.dll 12/28/2004
> (Datasource is configured with the IP address for the server, not the server 
> name)
> 
> 
> There is an approx. 30 sec. delay on initial connection.  After that, all db 
> transactions are fine.  
> 
> I had the company network people do some testing, they found nothing, and 
> here's what they said:
> 
> I took a look at the router and switch port where the server is currently 
> connected but found no issues.  The switch port auto negotiated a 100Mb/Full 
> Duplex with the server and there were no errors.  Ping tests to the server, 
> for what they are worth, were fine from the router and from Colshire.  I also 
> did a forward and reverse lookup, on the IP address it resolved but depending 
> on what server you are pointing to I got two slightly different responses.  I 
> can't think of any reason that this would cause an issue.
> 
> So why the 30 second delay?  If you don't know, do you have any utilities or 
> test software I can use to troubleshoot this.  
> 
> Thanks so much!
> CColby

--
MaxDB Discussion Mailing List
For list archives: http://lists.mysql.com/maxdb
To unsubscribe:    http://lists.mysql.com/maxdb?unsub=gcdm-maxdb@xxxxxxxxxxx